<![CDATA[Orange PI]]>Hello
Is it possible to install MM on Orange pi one. How to do it. Everywhere installation instructions for Rasb pi

]]>https://forum.magicmirror.builders/topic/10306/orange-piRSS for NodeSat, 11 Apr 2026 11:09:07 GMTThu, 18 Apr 2019 10:32:37 GMT60<![CDATA[Reply to Orange PI on Thu, 13 Jun 2019 13:56:55 GMT]]>Update: NanoPC T4 is a pretty good platform. The graphics aren’t quite what I had hoped. MMM-Globe (the pretty abstract one) isn’t very smooth. I did find that if the screen is in landscape mode it performs better than portrait mode. But even landscape isn’t smooth enough for my tastes. Next round of testing will be with MMM-AssistantMk2 and MMM-Hotword.

Oh, and the thing is hot to the touch. It comes with a heatsink and it’s painfully hot after a couple minutes.

]]>https://forum.magicmirror.builders/post/57920https://forum.magicmirror.builders/post/57920Thu, 13 Jun 2019 13:56:55 GMT<![CDATA[Reply to Orange PI on Fri, 26 Apr 2019 14:23:58 GMT]]>@Sean yeh, that device needs some serious power

]]>https://forum.magicmirror.builders/post/56464https://forum.magicmirror.builders/post/56464Fri, 26 Apr 2019 14:23:58 GMT<![CDATA[Reply to Orange PI on Fri, 26 Apr 2019 12:29:32 GMT]]>@sdetweil said in Orange PI:

Will be working on MMM-Hotword and MMM-Assistantmk2 when I get the chance.

I’ve tested on my Jetson Nano (Ubuntu 18.04 / node 10.15.3 / npm 6.4.1). And building without problem. But not tested on real usage because I should wait a new DC Power (USB powered Jetson Nano is too weak to handle several USB peripherals. :D )

]]>https://forum.magicmirror.builders/post/56459https://forum.magicmirror.builders/post/56459Fri, 26 Apr 2019 12:29:32 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 15:32:56 GMT]]>@deemedia pick one to match your hardware version.

Ubuntu desktop
http://www.orangepi.org/downloadresources/

]]>https://forum.magicmirror.builders/post/56400https://forum.magicmirror.builders/post/56400Wed, 24 Apr 2019 15:32:56 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 15:00:13 GMT]]>@sdetweil
Suit this ubuntu_lxde_desktop_For_OrangePi_One

]]>https://forum.magicmirror.builders/post/56399https://forum.magicmirror.builders/post/56399Wed, 24 Apr 2019 15:00:13 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:58:08 GMT]]>@sdetweil
what system should I put under this piece of iron to start. Thank you so much for helping.:folded_hands:

]]>https://forum.magicmirror.builders/post/56398https://forum.magicmirror.builders/post/56398Wed, 24 Apr 2019 14:58:08 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:56:13 GMT]]>@deemedia must have graphical ui. Browser requires it. that is why the display 0 error

]]>https://forum.magicmirror.builders/post/56397https://forum.magicmirror.builders/post/56397Wed, 24 Apr 2019 14:56:13 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:54:27 GMT]]>@sdetweil said in Orange PI:

н

no desktop no. installed Amdebian, without a graphical interface. I tried Ubuntu 15.04 mate desktop and also does not work.

]]>https://forum.magicmirror.builders/post/56396https://forum.magicmirror.builders/post/56396Wed, 24 Apr 2019 14:54:27 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:51:40 GMT]]>@deemedia sorry, not sure I understand. Is the graphical desktop running, looks like windows. Use a mouse to launch applications from the menu bar

]]>https://forum.magicmirror.builders/post/56395https://forum.magicmirror.builders/post/56395Wed, 24 Apr 2019 14:51:40 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:49:34 GMT]]>@sdetweil said in Orange PI:

xwindows
I did not try xwindows, I am a weak user

]]>https://forum.magicmirror.builders/post/56394https://forum.magicmirror.builders/post/56394Wed, 24 Apr 2019 14:49:34 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:45:43 GMT]]>@deemedia and xwindows is running?

]]>https://forum.magicmirror.builders/post/56393https://forum.magicmirror.builders/post/56393Wed, 24 Apr 2019 14:45:43 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:44:47 GMT]]>@sdetweil said in Orange PI:

VNC

No, not VNC, directly from the device

]]>https://forum.magicmirror.builders/post/56392https://forum.magicmirror.builders/post/56392Wed, 24 Apr 2019 14:44:47 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 14:40:00 GMT]]>@deemedia you are running a graphical user interface, right? Some desktop. U must

Also, are you trying this over vnc?
Display 0 is the main UI on the device

]]>https://forum.magicmirror.builders/post/56391https://forum.magicmirror.builders/post/56391Wed, 24 Apr 2019 14:40:00 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 05:56:24 GMT]]>Maybe someone has a ready image to install on a memory card and run without these tambourines.
ready to donate, for a working image on Orange Pi One

]]>https://forum.magicmirror.builders/post/56380https://forum.magicmirror.builders/post/56380Wed, 24 Apr 2019 05:56:24 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 05:52:40 GMT]]>@sdetweil said in Orange PI:

жно установить libgtk

Thanks, it helped. But now another problem

]]>https://forum.magicmirror.builders/post/56379https://forum.magicmirror.builders/post/56379Wed, 24 Apr 2019 05:52:40 GMT<![CDATA[Reply to Orange PI on Wed, 24 Apr 2019 05:50:33 GMT]]>On the way to launch. And again a mistake. I will soon throw out this Orange PI :face_with_steam_from_nose:
How to solve it?:dizzy_face:

(electron:4035): Gtk-WARNING **: cannot open display: :0
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.7.1 start: `sh run-start.sh`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.7.1 start script.
npm ERR! This is probably not a problem with npm. There is likely additional log                ging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/admin/.npm/_logs/2019-04-24T05_47_37_255Z-debug.log
]]>https://forum.magicmirror.builders/post/56378https://forum.magicmirror.builders/post/56378Wed, 24 Apr 2019 05:50:33 GMT<![CDATA[Reply to Orange PI on Tue, 23 Apr 2019 22:41:40 GMT]]>@sharmstr I installed Ubuntu 18.04, then mm without problem. Will be working on MMM-Hotword and MMM-Assistantmk2 when I get the chance. Need to move my webcam over

I could not boot a 64gig SD card. Only up to 32gifg

]]>https://forum.magicmirror.builders/post/56372https://forum.magicmirror.builders/post/56372Tue, 23 Apr 2019 22:41:40 GMT<![CDATA[Reply to Orange PI on Tue, 23 Apr 2019 21:13:19 GMT]]>@sdetweil My jetson nano arrived a few days ago. I bought it for this purpose. Glad to hear it worked for you.

]]>https://forum.magicmirror.builders/post/56367https://forum.magicmirror.builders/post/56367Tue, 23 Apr 2019 21:13:19 GMT<![CDATA[Reply to Orange PI on Tue, 23 Apr 2019 18:37:28 GMT]]>@deemedia libgtk-3.so.0

U need to install libgtk

See https://askubuntu.com/questions/1091101/error-libgtk-3-so-0-not-installed-even-though-its-in-usr-lib-x86-64-linux-gnu

]]>https://forum.magicmirror.builders/post/56362https://forum.magicmirror.builders/post/56362Tue, 23 Apr 2019 18:37:28 GMT<![CDATA[Reply to Orange PI on Tue, 23 Apr 2019 18:11:41 GMT]]>Someone installed it on the Orange Pi one? can you please give instructions

]]>https://forum.magicmirror.builders/post/56361https://forum.magicmirror.builders/post/56361Tue, 23 Apr 2019 18:11:41 GMT<![CDATA[Reply to Orange PI on Tue, 23 Apr 2019 18:08:44 GMT]]>Installation on the Armbian in manual mode ended in error. I do not know how to solve the problem start. There is who knows options:face_with_cold_sweat: :loudly_crying_face:

/home/admin/MagicMirror/node_modules/electron/dist/electron: error while loading shared libraries: libgtk-3.so.0: cannot open shared object file: No such file or directory
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.7.1 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR!
npm ERR! Failed at the magicmirror@2.7.1 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/admin/.npm/_logs/2019-04-23T17_59_43_024Z-debug.log
]]>https://forum.magicmirror.builders/post/56360https://forum.magicmirror.builders/post/56360Tue, 23 Apr 2019 18:08:44 GMT<![CDATA[Reply to Orange PI on Sat, 20 Apr 2019 08:31:39 GMT]]>You have to execute npm startin the MagicMirror directory, not in the home directory of your user pi. E.g. do cd MagicMirror (or /home/pi/MagicMirroror whatever your MM directory is) and then run npm start.

]]>https://forum.magicmirror.builders/post/56210https://forum.magicmirror.builders/post/56210Sat, 20 Apr 2019 08:31:39 GMT<![CDATA[Reply to Orange PI on Sat, 20 Apr 2019 06:17:00 GMT]]>@sdetweil
I tried installation on Armbian. I do not know what to do next, how to solve the startup problem

pi@orangepione:~$ npm start
npm ERR! path /home/pi/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open
npm ERR! enoent ENOENT: no such file or directory, open '/home/pi/package.json'
npm ERR! enoent This is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-04-20T06_03_50_330Z-debug.log
]]>https://forum.magicmirror.builders/post/56208https://forum.magicmirror.builders/post/56208Sat, 20 Apr 2019 06:17:00 GMT