MagicMirror² v2.13.0 is available! For more information about this release, check out this topic.

*NEW LIST 23.08.2020* Two way community order for mirror glass for all european countries - Open until at least 10 people have entered



  • @Goldjunge_Chriz , please count me in !

    # username width (m) height (m) real area (m²) area to pay for (min. 0,4 m²) location of delivery additional comments (like polished edges)
    1 malevolent 0.8 0.5 0.4 0.4 Spain -
    2 azra 0.38 0.58 0.22 0.4 Germany -
    3 azra 0.38 0.58 0.22 0.4 Germany polished edges
    4 Mascheljefferson 0.85 0.6 0.51 0.51 Germany polished edges
    5 Nunika 1.20 0.70 0.84 0.84 Austria polished edges


  • Wohoo, already half the way!! C’mon people! 😃

    I’m adding polished edges to my command

    1 malevolent 0.8 0.5 0.4 0.4 Spain polished edges
    2 azra 0.38 0.58 0.22 0.4 Germany -
    3 azra 0.38 0.58 0.22 0.4 Germany polished edges
    4 Mascheljefferson 0.85 0.6 0.51 0.51 Germany polished edges
    5 Nunika 1.20 0.70 0.84 0.84 Austria polished edges


  • @Goldjunge_Chriz , please count me in !

    # username width (m) height (m) real area (m²) area to pay for (min. 0,4 m²) location of delivery additional comments (like polished edges)
    1 malevolent 0.8 0.5 0.4 0.4 Spain polished edges
    2 azra 0.38 0.58 0.22 0.4 Germany -
    3 azra 0.38 0.58 0.22 0.4 Germany polished edges
    4 Mascheljefferson 0.85 0.6 0.51 0.51 Germany polished edges
    5 Nunika 1.20 0.70 0.84 0.84 Austria polished edges
    6 DeanoNoire 0.6 0.6 0.36 0.4 Czech Republic -


  • @Goldjunge_Chriz sorry if this has been asked/answered before, but I couldn’t find the info in the other threads I read: Does your mirror glas work with touch foils? I understand metallic coating interferes with capacitive touch, and I am not sure about the materials used in this glas. Thanks.



  • @TheTyrius

    the touch foil comes ON the glass and not under it. I can’t say whether it works below that and, as far as I know, nobody has tried it yet.



  • @Goldjunge_Chriz Thank you for letting me know.


Log in to reply