MMM-Fitbit2
-
Ah thank you! I was confused there. I’ll give it another go and let you know how it turns out.
-
@Vizulize So I clicked continue and it gets stuck at Opening web browser… I’ve tried doing it a few times now, but it’s not moving forward. Advice?
-
@Fr8Trayne Are you SSH’d in to your machine? You need to be on the machine locally, so that the browser can open, and you can log in to Fitbit in the browser.
This is all great feedback though - thanks for being patient!
-
@Vizulize no problem. I’m great at finding the problems
. I’ll have to connect directly to the Raspberry pi and try again. I’ll let you know how it goes. -
Hello,
When I’m asked to enter the “Client Secret”, in ssh (on the pi of the MagicMirror), I cannot type or paste anything.
What’s the solution ? -
@mattx38 - Read two messages above your post. You must work directly on the Pi in order to make it through the Fitbit login process. You can’t do this through an SSH connection.
-
@bhepler I did it directly from the terminal of the MMM Pi, sorry for my wrong explaination.
-
Hello,
I’ve installed MMM-Fitbit2 according the instructions.
Unfortunately on the MM screen the module says “Loading…” instead of showing any symbols.
Could someone help me? -
@chsp - You will probably need to check the logs and see if there are any error messages.
First, get an SSH connection to your Pi (assuming it’s a Pi) and type
pm2 log 0. Look for any errors. If you see none, point a web browser at your Pi’s IP address and use that to pull up the mirror’s interface. Press F12 to open the developer’s window and look in the Console tab for any errors.That should get you started.
-
Hi, the module works fine …
