<![CDATA[Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert]]>Hi,
and again I have finished a bathroom MagicMirror. This time it should be a mirror cabinet by special request, in Germany one says often “Alibert” to this kind of bathroom mirror. And so the MagicAlibert was born.

The principle of my MagicMirror you can see in this post.
You can also find the sources for mirror glass and accessories there.

Exterieur exterieur

Interieurinterieur

Parts, milled
Parts, milled

Parts, Flat dowel
Parts, Flat dowel

Parts, system 32 holes
Parts, system 32 holes

Hinge holes
Hinge holes

Hinges nearly closed
Hinges nearly closed

Hings open
Hings open

Shell clamped
Shell clamped

Shell finished
Shell finished

With back wall
With back wall

wall mounts
wall mounts

Hole for cable
Hole for cable

Body with doors
Body with doors

right door with cutout for screen
right door with cutout for screen

left door without cutout
left door without cutout

back plane for right door
back plane for right door

back plane for right door
back plane for right door

doors closed
doors closed

after painting
after painting

hinge
hinge

3D prints for left door - bracket glass insert - bracket cross bar
3D prints for left door - bracket glass insert - bracket cross bar

3D prints for left door - bracket glass insert - bracket cross bar
3D prints for left door - bracket glass insert - bracket cross bar

3D prints for left door - bracket glass insert - bracket cross bar
3D prints for left door - bracket glass insert - bracket cross bar

Screen built in
Screen built in

all technic installed
Screen built in

all technic installed
Screen built in

mounted back panel right door
mounted back panel right door

Handles and bracket mounted to hold up the heavy doors
Handles and bracket mounted to hold up the heavy doors

Handles and bracket mounted to hold up the heavy doors
Handles and bracket mounted to hold up the heavy doors

left door open
left door open

right door open
right door open

finished - ready to moun
finished - ready to mount

I have used:

You find a 3D model here

If you want to know more, then ask ;-)

Regards
Josef

]]>https://forum.magicmirror.builders/topic/14713/bathroom-magic-mirror-cabinet-alibert-magicalibertRSS for NodeTue, 14 Apr 2026 21:27:01 GMTSat, 27 Feb 2021 15:15:42 GMT60<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 14 Mar 2021 12:33:53 GMT]]>@lxne Thanks!
yes they are just glued
you see my method of glueing better in this post https://forum.magicmirror.builders/topic/9154/bathroom-magic-mirror
No, I don’t use chrome spy, I bought the mirrors here https://www.glas-star.de/spionspiegelnachmass/chrome-spy-spiegel/

]]>https://forum.magicmirror.builders/post/89481https://forum.magicmirror.builders/post/89481Sun, 14 Mar 2021 12:33:53 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 14 Mar 2021 10:22:26 GMT]]>Awesome work!
Are the mirrors just glued onto the doors?
And did you use the chrome spy for both sides?

Best wishes,
Alex (Lower Bavaria)

]]>https://forum.magicmirror.builders/post/89480https://forum.magicmirror.builders/post/89480Sun, 14 Mar 2021 10:22:26 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 14 Mar 2021 05:54:38 GMT]]>Hi all,

you could find a 3D model here

Regards
Josef

]]>https://forum.magicmirror.builders/post/89473https://forum.magicmirror.builders/post/89473Sun, 14 Mar 2021 05:54:38 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Mon, 01 Mar 2021 14:46:10 GMT]]>Hi everybody,

and here are the photos of the interior of the right door:

The screen is already fixed through the cutout of the Alu Dibond plate. With a little tape it is actually already fixed enough. For safety I have attached 4 angles, which press it additionally in. The Raspberry is mounted on a 3D printed plate. The cable routing is done via damp room cable boxes.

right door - interieur
right door - interieur

right door - interieur
right door - interieur

]]>https://forum.magicmirror.builders/post/89030https://forum.magicmirror.builders/post/89030Mon, 01 Mar 2021 14:46:10 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 19:06:20 GMT]]>@cyberphox Thanks for the compliments!

]]>https://forum.magicmirror.builders/post/89009https://forum.magicmirror.builders/post/89009Sun, 28 Feb 2021 19:06:20 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 17:10:32 GMT]]>That’s next level stuff right there! Great job!

]]>https://forum.magicmirror.builders/post/89006https://forum.magicmirror.builders/post/89006Sun, 28 Feb 2021 17:10:32 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 10:07:12 GMT]]>@OberfragGER
Thanks for the compliments!
I will put the radar sensor outside the body either on top or on the bottom. I have printed a white housing for it with the 3D printer, which I can mount accordingly. Let’s see where it responds better

]]>https://forum.magicmirror.builders/post/88983https://forum.magicmirror.builders/post/88983Sun, 28 Feb 2021 10:07:12 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 09:53:03 GMT]]>@spitzlbergerj Great work and finish.
Where did u attach the Haljia 5 RCWL-0516) an which Modul are u using for that sensor?

]]>https://forum.magicmirror.builders/post/88982https://forum.magicmirror.builders/post/88982Sun, 28 Feb 2021 09:53:03 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 08:28:01 GMT]]>@spitzlbergerj
thx !!

]]>https://forum.magicmirror.builders/post/88980https://forum.magicmirror.builders/post/88980Sun, 28 Feb 2021 08:28:01 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 08:25:23 GMT]]>Hi @binog ,
here is a picture of the back
back
The wiring still has to be done. This is only the temporary solution. The cords you can see on the photo are currently used for stabilization, because the MagicAlibert is very “door-heavy”.

I can only provide a picture of the mounted Raspberry Pi later, when I have removed the back of the door again.

]]>https://forum.magicmirror.builders/post/88979https://forum.magicmirror.builders/post/88979Sun, 28 Feb 2021 08:25:23 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 08:05:18 GMT]]>Hey, Great Work !
Can You post a picture from the back !?
And maybe a picture from the interior (counted from the last one, a picture between 4 and 5 so how You mounted the pi, etc…)
Thx !

]]>https://forum.magicmirror.builders/post/88978https://forum.magicmirror.builders/post/88978Sun, 28 Feb 2021 08:05:18 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 07:28:29 GMT]]>@nickthebeer

What’s the toilet roll etc on the display for

Hi, thats the module for the bring list app: https://github.com/rseidt/MMM-bringList
;-)

]]>https://forum.magicmirror.builders/post/88976https://forum.magicmirror.builders/post/88976Sun, 28 Feb 2021 07:28:29 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 07:14:19 GMT]]>@spitzlbergerj that’s is really cool, I might make one of these for home when we change our bathroom suite. What’s the toilet roll etc on the display for?

]]>https://forum.magicmirror.builders/post/88975https://forum.magicmirror.builders/post/88975Sun, 28 Feb 2021 07:14:19 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sun, 28 Feb 2021 06:12:37 GMT]]>@sdetweil, @Zoltan, @cowboysdude Thanks for your compliments

]]>https://forum.magicmirror.builders/post/88973https://forum.magicmirror.builders/post/88973Sun, 28 Feb 2021 06:12:37 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sat, 27 Feb 2021 23:10:40 GMT]]>@spitzlbergerj this is by far the best bathroom mirror I have seen!! Excellent job and tutorial!

]]>https://forum.magicmirror.builders/post/88971https://forum.magicmirror.builders/post/88971Sat, 27 Feb 2021 23:10:40 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sat, 27 Feb 2021 20:11:59 GMT]]>I love the Bring! App, just had to google for it :D

]]>https://forum.magicmirror.builders/post/88965https://forum.magicmirror.builders/post/88965Sat, 27 Feb 2021 20:11:59 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sat, 27 Feb 2021 16:26:50 GMT]]>I really like the two door idea

Really neat woodwork

]]>https://forum.magicmirror.builders/post/88963https://forum.magicmirror.builders/post/88963Sat, 27 Feb 2021 16:26:50 GMT<![CDATA[Reply to Bathroom Magic Mirror Cabinet "Alibert" - MagicAlibert on Sat, 27 Feb 2021 15:40:46 GMT]]>@spitzlbergerj really awesome!!

]]>https://forum.magicmirror.builders/post/88959https://forum.magicmirror.builders/post/88959Sat, 27 Feb 2021 15:40:46 GMT