UNSOLVED Face Recognition with inferred light
-
Yeah, if that didn’t work around the camera, then you’ll need to add them to the frame (or in front of the mirror essentially.)
-
Maybe something like this embedded in the frame?
http://amzn.com/B019QTDDH2 -
Saw this too
I think i will create a new frame with a larger monitor and a real mirror glas anyway so i gonna try to get more IR-Light into this.
The only doubt i got is the power consumption… Tons of IR-Lights = Tons of W/h
-
Problem solved! 80-100 METERS of illumination!
-
a bit too strong for a 4x1.5m corridor -
This might work though, if you’re using either an rPi camera, or something similar. If you’re going to put the camera in the frame, you’ll be drilling a hole. Why not two more for the IR lights as well. And at 3W each, that’s mighty bright. http://amzn.com/B00ZEFIU6C
-
hmmmm. thanks sounds like a plan.
I think i have to drill one larger hole, otherwise the photodiode cant see wether its dark or not hm?
-
A small hole next to the large one, enough for light to go through, should work. Usually it’s a tiny pinhole, but that’s also assuming the sensor is literally right up against the pinhole.
-
so still the problem with not logging in correctly
-
Is there any log in the Web inspector?
