<![CDATA[Temperature/humidity on Magic Mirror]]>Hello everybody,
I would like to know the temperature/humidity in 3 points of the house (one also outside).
Could you recommend both the WiFi sensor and the module to be used on MM?

If it can be useful soon I should buy a NEST Audio …

Thank you all.

]]>https://forum.magicmirror.builders/topic/17193/temperature-humidity-on-magic-mirrorRSS for NodeTue, 11 Aug 2026 08:05:42 GMTFri, 09 Sep 2022 13:51:51 GMT60<![CDATA[Reply to Temperature/humidity on Magic Mirror on Sat, 17 Sep 2022 01:14:42 GMT]]>@sdetweil Thanks, Sam. I may take a look at that Ecobee API and/or the charting. The Ecobee is currently not in use in my new house, but this may give me the added incentive to get going on that. Thanks again.

]]>https://forum.magicmirror.builders/post/104567https://forum.magicmirror.builders/post/104567Sat, 17 Sep 2022 01:14:42 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Mon, 12 Sep 2022 22:48:03 GMT]]>@JohnGalt I have not integrated my ecobee to my MagicMirror

but it looks like there is an API
https://www.notion.so/API-Documentation-e4a7746e6a3f45dbb58ea6b45b8f9744

and one can get charts now
https://beestat.io/

Screenshot_20220912-160011_Chrome.jpg

Screenshot_20220912-155955_Chrome.jpg

I believe the section at sensor details shows the ‘occupancy’ … this is like a week of detail from my house.
in the live version there is floating info as the cursor passes over data

Screenshot at 2022-09-12 17-45-33.png

]]>https://forum.magicmirror.builders/post/104483https://forum.magicmirror.builders/post/104483Mon, 12 Sep 2022 22:48:03 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Mon, 12 Sep 2022 20:52:12 GMT]]>@sdetweil : Sam, it sounds like you are integrating your Ecobee with your MagicMirror - true? If so, can you tell us how you get the data out of the Ecobee? I looked at it some time ago, and it appeared Ecobee uses [used?] a wireless band separate from basic WiFi, and I saw no way to tap into the information stream. I would be tempted to take another look at integrating data from the Ecobee into MagicMirror if feasible.

]]>https://forum.magicmirror.builders/post/104482https://forum.magicmirror.builders/post/104482Mon, 12 Sep 2022 20:52:12 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Mon, 12 Sep 2022 13:48:24 GMT]]>@sdetweil said in Temperature/humidity on Magic Mirror:

@Egnos all ecobee have motion detection in their thermostat and room sensors. that’s how they know the room is occupied… and could be used in temp averaging.

Ah ok!
Does the HUB for these sensors do the thermostat?
What module do you use?

Thanks

]]>https://forum.magicmirror.builders/post/104463https://forum.magicmirror.builders/post/104463Mon, 12 Sep 2022 13:48:24 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Mon, 12 Sep 2022 13:24:49 GMT]]>@Egnos all ecobee have motion detection in their thermostat and room sensors. that’s how they know the room is occupied… and could be used in temp averaging.

]]>https://forum.magicmirror.builders/post/104459https://forum.magicmirror.builders/post/104459Mon, 12 Sep 2022 13:24:49 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Mon, 12 Sep 2022 13:07:39 GMT]]>@sdetweil said in Temperature/humidity on Magic Mirror:

no, it’s vendors protecting their data, regardless of what the users want…
I have ecobee, w motion sensors… why should I need another motion sensor?

Motion sensor?!
Is the HUB done by the thermostat for all Ecobee sensors?
Which module do you use for Ecobee?

@Jimminy said in Temperature/humidity on Magic Mirror:

You might want to have a look at https://tinyurl.com/WiFi-Temp-7-Humidity-Sensor. I have one on order so will have to wait and see if it does as advertised.

The link takes me to the “home” of AliExpress, could you put the correct link?
How do you think to share the info of this sensor with MM?

@BKeyport said in Temperature/humidity on Magic Mirror:

the outdoor sensors is actually not connected to anything. Solar powered, wireless to it’s controller, which then is connected to my network and uploaded to a website to create the panel.

So they can be physically not connected to the RPI.
Could you tell me the type of sensor and how it connects (power supply, WiFi, etc …)?
How do you bring the information of these external sensors on the local network and then in the browser?

Thank you all for valuable information! :folded_hands:

]]>https://forum.magicmirror.builders/post/104457https://forum.magicmirror.builders/post/104457Mon, 12 Sep 2022 13:07:39 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Sun, 11 Sep 2022 07:41:27 GMT]]>@Egnos the internal and room sensors are connected, yes. However, the outdoor sensors is actually not connected to anything. Solar powered, wireless to it’s controller, which then is connected to my network and uploaded to a website to create the panel.

]]>https://forum.magicmirror.builders/post/104406https://forum.magicmirror.builders/post/104406Sun, 11 Sep 2022 07:41:27 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Sun, 11 Sep 2022 03:32:21 GMT]]>@Egnos
You might want to have a look at https://tinyurl.com/WiFi-Temp-7-Humidity-Sensor. I have one on order so will have to wait and see if it does as advertised.

]]>https://forum.magicmirror.builders/post/104408https://forum.magicmirror.builders/post/104408Sun, 11 Sep 2022 03:32:21 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Sun, 11 Sep 2022 01:16:18 GMT]]>@Egnos said in Temperature/humidity on Magic Mirror:

But I think it’s science fiction!

no, it’s vendors protecting their data, regardless of what the users want…

I have ecobee, w motion sensors… why should I need another motion sensor?

]]>https://forum.magicmirror.builders/post/104402https://forum.magicmirror.builders/post/104402Sun, 11 Sep 2022 01:16:18 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Sun, 11 Sep 2022 00:30:44 GMT]]>Thank you very much @BKeyport and I find your environment very ingenious!
I was looking for something less complex, the sensors you mentioned must still be connected to Arduino/RPI…if I’m not mistaken!

I was hoping there were temperature sensors that would connect to Google Home and some module was able to take this information and display it on the MM.
But I think it’s science fiction! ;-)

]]>https://forum.magicmirror.builders/post/104399https://forum.magicmirror.builders/post/104399Sun, 11 Sep 2022 00:30:44 GMT<![CDATA[Reply to Temperature/humidity on Magic Mirror on Fri, 09 Sep 2022 21:50:30 GMT]]>@Egnos I’d look to see what’s supported in the 3rd party modules, and work backwards from there… that being said, for outside modules, go with Davis or other commercial products, and use something like an iframe tool, I use MMM-HTMLSnippet - and just grab the panel I want from Davis’ choices.

https://github.com/MichMich/MagicMirror/wiki/3rd-Party-Modules#utility--iot--3rd-party--integration

In this picture, the “internal” and “room” temps are provided by MMM-Temperature via i2c/Stemma QT modules (Room being a BME 280 from Adafruit, Internal is a HTU21 also from Adafruit)

The big panel is MMM-HTMLSnippet.

CSS is modified a lot to fit my theming.

86a68d24-a97f-4f1f-b10b-1d59b086ddb2-image.png

]]>https://forum.magicmirror.builders/post/104362https://forum.magicmirror.builders/post/104362Fri, 09 Sep 2022 21:50:30 GMT