<![CDATA[MMM-NokiaHealth (Withings)]]>Description:

I have just created (based on the MMM-iFrame module) a module to show a graph of scale measurements from Withings.

Very very much alpha stage, but quite simple to setup and use, any comments, suggestions or PRs are most welcome.

The idea is that you setup a IFTTT applet that runs a webrequest when a new body measurement is made. That will show the graph on the mirror, and it will autohide again.

(It would be great to add config options to change this behavior, but that is on the todo list)

Download

[card:ecomerc/MMM-NokiaHealth]

]]>https://forum.magicmirror.builders/topic/4630/mmm-nokiahealth-withingsRSS for NodeMon, 20 Jul 2026 00:49:20 GMTFri, 11 Aug 2017 09:25:48 GMT60<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 17 Dec 2020 10:37:54 GMT]]>hello I have a problem, the address callback where have it found?

]]>https://forum.magicmirror.builders/post/85825https://forum.magicmirror.builders/post/85825Thu, 17 Dec 2020 10:37:54 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Wed, 11 Mar 2020 04:31:52 GMT]]>@Bouba830 Sorry missed the ‚s‘ at the end of the link. Here the corrected link
https://github.com/kodymallory/MMM-withings

]]>https://forum.magicmirror.builders/post/70445https://forum.magicmirror.builders/post/70445Wed, 11 Mar 2020 04:31:52 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 10 Mar 2020 19:30:46 GMT]]>@Fozi merci mais erreur 404 :(

]]>https://forum.magicmirror.builders/post/70430https://forum.magicmirror.builders/post/70430Tue, 10 Mar 2020 19:30:46 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Wed, 04 Mar 2020 05:31:29 GMT]]>@Bouba830 try this https://github.com/kodymallory/MMM-withing. This module works. It can be a bit tricky to receive the token (step 7-9 in the installation description) as it has be done within 30 seconds, but keep repeating.

]]>https://forum.magicmirror.builders/post/70207https://forum.magicmirror.builders/post/70207Wed, 04 Mar 2020 05:31:29 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 03 Mar 2020 18:07:03 GMT]]>Hello
I cannot connect to retrieve the ID
I have the impression that the links no longer work!
can you help me ?
thank you ;)

]]>https://forum.magicmirror.builders/post/70197https://forum.magicmirror.builders/post/70197Tue, 03 Mar 2020 18:07:03 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 08 Mar 2018 15:15:07 GMT]]>Any update on this? I would love to see the graphs from the Nokia Health

]]>https://forum.magicmirror.builders/post/36745https://forum.magicmirror.builders/post/36745Thu, 08 Mar 2018 15:15:07 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 08:02:54 GMT]]>@petero-dk I can’t wait for…thanks

]]>https://forum.magicmirror.builders/post/28005https://forum.magicmirror.builders/post/28005Tue, 12 Sep 2017 08:02:54 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:52:24 GMT]]>@zdenek not yet, but next version for both things…

]]>https://forum.magicmirror.builders/post/28003https://forum.magicmirror.builders/post/28003Tue, 12 Sep 2017 07:52:24 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:51:40 GMT]]>@petero-dk said in MMM-NokiaHealth (Withings):

http://apps.ecomerc.com/nokiahealth/user.p

oh, I’ve got it. So there is actually no way to display it permanently?
and is there way, how to change the scale? or zoom? I mean, to see graph from 0 to 100 kilos doesn’t give detailed info. Let imagine, your weight is 80 kilos and you know, it can be from 70 to 90 and you want to see just this range…

thanky

]]>https://forum.magicmirror.builders/post/28002https://forum.magicmirror.builders/post/28002Tue, 12 Sep 2017 07:51:40 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:46:13 GMT]]>@zdenek You do not need to reset MM, just call the http://apps.ecomerc.com/nokiahealth/user.php?userid=[youruserid]&a=set and the graph will display for a few seconds.

When you want to see it again, call
http://apps.ecomerc.com/nokiahealth/user.php?userid=[youruserid]&a=set

(It is like a remote control for the graph) - yes I know it seems stupid but at the time it was a good idea, it will be changed completely

]]>https://forum.magicmirror.builders/post/28001https://forum.magicmirror.builders/post/28001Tue, 12 Sep 2017 07:46:13 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:44:22 GMT]]>@petero-dk thx, but now I’m confused even more. I did the trick with a=set and after start MM I can see the graph (there was somehting like “Values for…” but I’ve of course named ppl in the device) and small graph (need to resize, cause I can identify that the weight is between 50 and 100 kilos - this not enough to monitor the weight differences). Anyway, the graph after few secs disappeard and doesn’t start anymore. I tried restart MM (not the whole RP). So it’s not the same - in the DEV I can see values, no error, but on the screen no graph.

btw, great job - everyone, who is able own module is for me like magic-man

Zdeněk

]]>https://forum.magicmirror.builders/post/28000https://forum.magicmirror.builders/post/28000Tue, 12 Sep 2017 07:44:22 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:24:53 GMT]]>I know, I know, I know, the use case is convoluted and it needs work work work.

The graph will not display until a remote server flag is set. This was to avoid opening ports in the local network (which is not possible with me). The graph is supposed to only show when you have been on the scale (I am working on something that will make that user configurable, but time, ohhhh that missing time)

For now, try manually from your phone or laptop or somewhere else calling:
http://apps.ecomerc.com/nokiahealth/user.php?userid=[youruserid]&a=set

That will set a server flag that the module will check in order to show the graph. The idea was you can use IFTTT to set the server flag and show the graph, this was the model because IFTTT has a trigger for Withings new measurement. This does not work because the IFTTT trigger has a delay of up to 15 minutes.

]]>https://forum.magicmirror.builders/post/27999https://forum.magicmirror.builders/post/27999Tue, 12 Sep 2017 07:24:53 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Tue, 12 Sep 2017 07:05:13 GMT]]>still doesn’t work for me. I’ve tried new Raspberry pi 3, clean install of NOOB, installed MM, updated everything. Installed just few modules (Simple logo and MMM-WunderGround) and Nokia. It connects to server, get the data, but just not to create the graph. as you can see, alt text, div is created, and in Dev console is no error and in seleted DIV are located data alt text
Of course I ran npm install after installation of module Nokia.

thanks for help, Zdeněk

]]>https://forum.magicmirror.builders/post/27998https://forum.magicmirror.builders/post/27998Tue, 12 Sep 2017 07:05:13 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Fri, 08 Sep 2017 17:51:14 GMT]]>had a look at the pcap add-on to be honest i think its going to be heavy for just a listener

]]>https://forum.magicmirror.builders/post/27802https://forum.magicmirror.builders/post/27802Fri, 08 Sep 2017 17:51:14 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 07 Sep 2017 09:06:18 GMT]]>I am just airing one idea here:

Using the https://github.com/node-pcap/node_pcap I should be able to setup a listener for Withings Scales (by either destination URL or MAC address) once a device is detected show the graph.

Please feel free to share your thoughts on that? I do not know if this is too much for the MagicMirror to handle with pcap add-on. Perhaps this should be a separate plugin that can be reused for other device detections.

]]>https://forum.magicmirror.builders/post/27741https://forum.magicmirror.builders/post/27741Thu, 07 Sep 2017 09:06:18 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 07 Sep 2017 09:01:03 GMT]]>Hmmmmm i see your predicament sir…

]]>https://forum.magicmirror.builders/post/27740https://forum.magicmirror.builders/post/27740Thu, 07 Sep 2017 09:01:03 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 07 Sep 2017 08:58:49 GMT]]>I am sorry for the really slow response time, I have been totally swamped at work.

When it shows on the screen, it is essentially a small iframe in the middle with a graph (I will at some point get a screenshot)

However I have realized that the IFTTT integration is waaaaaay to slow, it will check once every 15 minutes, and then I have usually left the mirror. I need to figure out a way to instantly get the information from the scale. I have a few ideas but simply not enough time.

]]>https://forum.magicmirror.builders/post/27739https://forum.magicmirror.builders/post/27739Thu, 07 Sep 2017 08:58:49 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Thu, 07 Sep 2017 08:55:52 GMT]]>Hi there is it possible to see a screenshot of how the graph looks like on the mirror, Thanks.

]]>https://forum.magicmirror.builders/post/27738https://forum.magicmirror.builders/post/27738Thu, 07 Sep 2017 08:55:52 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sun, 13 Aug 2017 13:58:10 GMT]]>@strawberry-3.141 You are right, there was typo in Position. Now there is no error, but the module is not visible at all. No Error, but in Source code of page I can see the data, so it means, ID is right, script gets data, just doesn’t display. Could be cause I’ve another iFrame on the screen?

thanks

]]>https://forum.magicmirror.builders/post/26489https://forum.magicmirror.builders/post/26489Sun, 13 Aug 2017 13:58:10 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sun, 13 Aug 2017 09:29:03 GMT]]>@zdenek Pls check the region that you set in your config. I only get this error, when I am using an invalid config position.

]]>https://forum.magicmirror.builders/post/26486https://forum.magicmirror.builders/post/26486Sun, 13 Aug 2017 09:29:03 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sat, 12 Aug 2017 14:14:04 GMT]]>@strawberry-3.141 done, here is the result

MMM-NokiaHealth received a system notification: ALL_MODULES_STARTED
main.js:38 
Uncaught TypeError: Cannot read property 'appendChild' of undefined
    at createDomObjects (main.js:38)
    at Object.modulesStarted (main.js:425)
    at startModules (loader.js:59)
    at loader.js:40
    at HTMLLinkElement.stylesheet.onload (loader.js:203)
]]>https://forum.magicmirror.builders/post/26458https://forum.magicmirror.builders/post/26458Sat, 12 Aug 2017 14:14:04 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sat, 12 Aug 2017 07:42:46 GMT]]>@zdenek the logs are all related to other modules as far as i can see, that comes probably because they are in your config after mmm-nokiahealth. can you put mmm-nokiahealth at the bottom of your configured modules and try to restart and then post the logs again so we can see the logs related to this module

]]>https://forum.magicmirror.builders/post/26451https://forum.magicmirror.builders/post/26451Sat, 12 Aug 2017 07:42:46 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sat, 12 Aug 2017 07:34:54 GMT]]>yes, I did

Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Object.$.getJSON [as success] (MMM-Hue.js:155)
    at fire (jquery.js:1037)
    at Object.fireWith [as resolveWith] (jquery.js:1148)
    at done (jquery.js:8074)
    at XMLHttpRequest.callback (jquery.js:8598)
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Class.socketNotificationReceived (MMM-SystemStats.js:68)
    at module.js:183
    at n. (socketclient.js:25)
    at n.emit (universalModuleDefinition:2)
    at n.onevent (universalModuleDefinition:3)
    at n.MMSocket.self.socket.onevent (socketclient.js:19)
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Class.socketNotificationReceived (MMM-SystemStats.js:68)
    at module.js:183
    at n. (socketclient.js:25)
    at n.emit (universalModuleDefinition:2)
    at n.onevent (universalModuleDefinition:3)
    at n.MMSocket.self.socket.onevent (socketclient.js:19)
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Class.socketNotificationReceived (MMM-synology-ds.js:93)
    at module.js:183
    at n. (socketclient.js:25)
    at n.emit (universalModuleDefinition:2)
    at n.onevent (universalModuleDefinition:3)
    at n.MMSocket.self.socket.onevent (socketclient.js:19)
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Object.$.getJSON [as success] (MMM-Hue.js:155)
    at fire (jquery.js:1037)
    at Object.fireWith [as resolveWith] (jquery.js:1148)
    at done (jquery.js:8074)
    at XMLHttpRequest.callback (jquery.js:8598)
moduleNeedsUpdate @ main.js:134
updateDom @ main.js:104
updateDom @ main.js:468
updateDom @ module.js:295
$.getJSON @ MMM-Hue.js:155
fire @ jquery.js:1037
fireWith @ jquery.js:1148
done @ jquery.js:8074
callback @ jquery.js:8598
XMLHttpRequest.send (async)
send @ jquery.js:8526
ajax @ jquery.js:7978
jQuery.(anonymous function) @ jquery.js:7614
getJSON @ jquery.js:8108
getData @ MMM-Hue.js:153
setInterval @ MMM-Hue.js:52
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Class.socketNotificationReceived (MMM-SystemStats.js:68)
    at module.js:183
    at n. (socketclient.js:25)
    at n.emit (universalModuleDefinition:2)
    at n.onevent (universalModuleDefinition:3)
    at n.MMSocket.self.socket.onevent (socketclient.js:19)
moduleNeedsUpdate @ main.js:134
updateDom @ main.js:104
updateDom @ main.js:468
updateDom @ module.js:295
socketNotificationReceived @ MMM-SystemStats.js:68
(anonymous) @ module.js:183
(anonymous) @ socketclient.js:25
n.emit @ universalModuleDefinition:2
n.onevent @ universalModuleDefinition:3
MMSocket.self.socket.onevent @ socketclient.js:19
n.onpacket @ universalModuleDefinition:3
(anonymous) @ universalModuleDefinition:3
n.emit @ universalModuleDefinition:2
n.ondecoded @ universalModuleDefinition:1
(anonymous) @ universalModuleDefinition:3
r.emit @ universalModuleDefinition:1
s.add @ universalModuleDefinition:1
n.ondata @ universalModuleDefinition:1
(anonymous) @ universalModuleDefinition:3
n.emit @ universalModuleDefinition:2
n.onPacket @ universalModuleDefinition:2
(anonymous) @ universalModuleDefinition:2
n.emit @ universalModuleDefinition:2
n.onPacket @ universalModuleDefinition:2
n.onData @ universalModuleDefinition:2
ws.onmessage @ universalModuleDefinition:3
main.js:134 Uncaught TypeError: Cannot read property 'getElementsByClassName' of null
    at moduleNeedsUpdate (main.js:134)
    at updateDom (main.js:104)
    at Object.updateDom (main.js:468)
    at Class.updateDom (module.js:295)
    at Class.socketNotificationReceived (MMM-synology-ds.js:93)
    at module.js:183
    at n. (socketclient.js:25)
    at n.emit (universalModuleDefinition:2)
    at n.onevent (universalModuleDefinition:3)
    at n.MMSocket.self.socket.onevent (socketclient.js:19)

a lot of these rows

]]>https://forum.magicmirror.builders/post/26450https://forum.magicmirror.builders/post/26450Sat, 12 Aug 2017 07:34:54 GMT<![CDATA[Reply to MMM-NokiaHealth (Withings) on Sat, 12 Aug 2017 07:06:56 GMT]]>@zdenek did you run npm install in the directory of this module? The readme doesn’t say so, but it is required as the module makes use of some dependencies. For further help it would be great if you can post the logs with the errors.

]]>https://forum.magicmirror.builders/post/26445https://forum.magicmirror.builders/post/26445Sat, 12 Aug 2017 07:06:56 GMT