Who can help me to find my PIR Sensor problem
-
Who can help me to find my PIR Sensor problem ?
Using:
Raspberry Pi 3 Model B Rev 1.2
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 76.80
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : BCM2835
Revision : a02082
Serial : 00000000af2e503eMMM v2.1.3
https://github.com/paviro/MMM-PIR-Sensor.gitalready done:
git clone …
npm install …
chmod on user and map structuresAll i get is my normal MM screen and every other modul works fine.
Testing on Motion-test.js shows me the correct status, and turns HDMI monitor off and on.also tested the MMM-MotionCensor but the same problem. the monitor is not going to sleep.
regards,
Harm Moed -
Have you tested the PIR independently of the mirror ? (ie, does it work the way you want it to ?). This is a good guide to setting them up and testing they work.
https://www.raspberrypi-spy.co.uk/2013/01/cheap-pir-sensors-and-the-raspberry-pi-part-1/
I had issues with the same MM module, and chose to use this solution instead, which works perfectly and has the added advantage of working regardless of whether MM is running.
-
Bob thnx,
It’s working fine now.
just iinstalled it like a service and added the PIR.PY a litle bit just for my personal settings and my HDMI screen turns off afther 5 minutes.Next thing i want to do is to include it as a module in he MMM Remote Control app so i can show or hide the status and countdown time on un mobile or screen.
tHNx again Bob.
-
@hmoed No problem, glad you got it working.
