Read the statement by Michael Teeuw here.
Failure of v2.2.0
-
There has been known issues with Stretch in general… I would go back to Jessie and try it again…
-
Pardon my ignorance but where would I find Jessie Lite. On the Pi website download all I am offered is this RASPBIAN STRETCH LITE or the version with the desktop.
carltonb -
After a bunch of searching I finally found it at https://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2017-07-05/
Had to do a lot of digging. Seems it is outdated by strech.
Thanks -
@carltonb said in Failure of v2.2.0:
Had to do a lot of digging. Seems it is outdated by strech.
It is outdated by Stretch, but as @cowbowsdude stated, there have been some issues with Stretch and MM. With a full version of Jessie, you won’t encounter any problems that are OS related. Does it really matter to you what OS you use as long as it runs MM without issue? Lite versions can present their own set of problems during installation.
My recommendation is this version of Jessie
http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/ -
@Mykle1 Thanks, I will give it a try. Interesting that I have used the stretch version on 4 setups with no problem. Must be with the new version 2.2 that it has issues.
I will let you know the results.
carltonb -
@carltonb said in Failure of v2.2.0:
Must be with the new version 2.2 that it has issues.
That is entirely possible. Good luck, mate!
Peace
-
@carltonb No ignorance…it’s okay to ask questions! :)
-
@Mykle1 Since as you said the OS makes no difference to me. So …
This is the file I d/l
2017-07-05-raspbian-jessie.zip 05-Jul-2017 13:05 1.5G
Install went fine, but again crashed when I tried to use this command. It crashes at the same point every time. See the file generation after I start the installer in the first post.Get and install MagicMirror with the Automatic Installer:
curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh | bash
Might there be something wrong script that is trying to install it.
Is there another way to install it without using the Automatic Installer script.carltonb
-
@carltonb said in Failure of v2.2.0:
Is there another way to install it without using the Automatic Installer script.
-
“Crashed” like in not responding? Any error messages?