@sdetweil going to check right now thanks.

@justjim1220 I’ve moved to a NUC and your module is now scrolling incredibly smooth. :D

Only can you please tell me what to edit to avoid scrolling from right to left (after having scrolled from left to right)?

@BKeyport sorry for always bothering you lol, but you look still quite active here in the forums (despite of other developers that might have left). :)

Do you know by chance what to edit here?

Only can you please tell me what to edit to avoid scrolling from right to left (after having scrolled from left to right)?

thank you

@Giarry88 said in MMM-NewsFeedTicker:

(I didn’t think it would have mattered)…

linux is case sensitive… windows is not

look in the console where u start ed MagicMirror

if pm2, the use the pm2 logs --lines=100 command to view the logs…

the error more than likely is a bad url, ???

I don’t know why, when I closed and Opened again Magic Mirror, it wasn’t working at all; so I started with the backup of the config file and now it is working everything, ticker included. I think that I just needed to remove the default feed (especially the url - I was asking him to load the same feed on both modules -).
Now I only have an issue with the stuttering ticker (but I’ve read something about it so I will try solving it by looking at those posts).

Thanks again sdetweil, especially for your patience!

(I didn’t think it would have mattered)…

linux is case sensitive… windows is not

look in the console where u start ed MagicMirror

if pm2, the use the pm2 logs --lines=100 command to view the logs…

the error more than likely is a bad url, ???

@Giarry88 :8080/modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)

says file not there

you can get rid of this one by creating an empty custom.css (my installation script does this)

:1 Refused to apply style from ‘http://localhost:8080/css/custom.css’ because its MIME type (‘text/html’) is not a supported stylesheet MIME type, and strict MIME checking is enabled

touch ~/MagicMirror/css/custom.css

so…
I created the custom.css (but I’ve added the command for removing the borders, because I had it in the main.css - yes…i know…my bad :grimacing_face: - also it seems I can’t remove the spacing at the top, but this is a ittle bit OT) now as you said it previously that error disappeared.

Now I have only

Load script: modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js
GET http://localhost:8080/modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js net::ERR_ABORTED 404 (Not Found)
Error on loading script: modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js

But this morning I’ve installed an other module (MMM-networrk-signal) in the same way and it is working properly

Load script: modules/MMM-network-signal//MMM-network-signal.js
Module registered: MMM-network-signal

I am confused…

EDIT

My mistake was that I didn’t put capital letters in the name of the folder (I didn’t think it would have mattered)…
Now I can see the red bar with “Loading” and in the console it keeps showing :

MMM-NewsFeedTicker - unknown notification, ignoring: CLOCK_SECOND
MMM-NewsFeedTicker - received notification: CLOCK_SECOND

says file not there

you can get rid of this one by creating an empty custom.css (my installation script does this)

:1 Refused to apply style from ‘http://localhost:8080/css/custom.css’ because its MIME type (‘text/html’) is not a supported stylesheet MIME type, and strict MIME checking is enabled

touch ~/MagicMirror/css/custom.css

@Giarry88 sounds like u didn’t install the module in the right place

I’ve nstalled it in the Modules folders (outside of the Default folder, correct?)

@Giarry88 open the developers window ctrl-shift-i on the keyboard, and select the console tab and scroll up to see any errors.

yes,

Load script: modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js
:8080/modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)
loader.js:187 Error on loading script: modules/MMM-NewsFeedTicker//MMM-NewsFeedTicker.js
script.onerror @ loader.js:187
loader.js:194 Load stylesheet: css/custom.css
(index):1 Refused to apply style from ‘http://localhost:8080/css/custom.css’ because its MIME type (‘text/html’) is not a supported stylesheet MIME type, and strict MIME checking is enabled.
loader.js:203 Error on loading stylesheet: css/custom.css

@Giarry88 said in MMM-NewsFeedTicker:

What does “check.config” do?

It checks the config.js file

Ok, i’ve checked and corrected it with geanie and now the syntax is correct but it still doesn’t show it on mm

What does “check.config” do?

It checks the config.js file

@Giarry88 from the MagicMirror folder do

npm run check:config

Thanks sdetweil.

the terminal says:

pi@raspberrypi:~/magicmirror $ npm run check:config
npm ERR! missing script: check:config

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2020-04-22T00_59_46_184Z-debug.log

the log says:

0 info it worked if it ends with ok
1 verbose cli [ ‘/usr/bin/node’, ‘/usr/bin/npm’, ‘run’, ‘check:config’ ]
2 info using npm@6.14.4
3 info using node@v10.20.1
4 verbose stack Error: missing script: check:config
4 verbose stack at run (/usr/lib/node_modules/npm/lib/run-script.js:155:19)
4 verbose stack at /usr/lib/node_modules/npm/lib/run-script.js:63:5
4 verbose stack at /usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:116:5
4 verbose stack at /usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:436:5
4 verbose stack at checkBinReferences_ (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:391:45)
4 verbose stack at final (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:434:3)
4 verbose stack at then (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:161:5)
4 verbose stack at /usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:382:12
4 verbose stack at /usr/lib/node_modules/npm/node_modules/graceful-fs/graceful-fs.js:115:16
4 verbose stack at FSReqWrap.readFileAfterClose [as oncomplete] (internal/fs/read_file_context.js:53:3)
5 verbose cwd /home/pi/magicmirror
6 verbose Linux 4.19.97-v7l+
7 verbose argv “/usr/bin/node” “/usr/bin/npm” “run” “check:config”
8 verbose node v10.20.1
9 verbose npm v6.14.4
10 error missing script: check:config
11 verbose exit [ 1, true ]

What does “check.config” do?

npm run check:config

modules: [
	{
		module: "alert",
	},
	{
		module: "updatenotification",
		position: "top_bar"
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: "calendar",
		header: "Calendario di Google",
		position: "top_left",
		config: {
			calendars: [
				{
					symbol: "calendar-check",
					url: "MY CALENDAR"					}
			]
		}
	},
	{
		module: "compliments",
		position: "lower_third"
	},
	{
		module: "currentweather",
		position: "top_right",
		config: {
			location: "Savona, Italy",
			locationID: "6542009", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "MYAPPID"
		}
	},
	{
		module: "weatherforecast",
		position: "top_right",
		header: "Previsioni Meteo:",
		config: {
			location: "Savona, Italy",
			locationID: "6542009", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
			appid: "MYAPPID"
		}
	},
	{
		module: "newsfeed",
		position: "bottom_bar",
		config: {
			feeds: [
				{
					title: "ANSA",
					url: "https://www.ansa.it/sito/ansait_rss.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true,
			broadcastNewsFeeds: true,
			broadcastNewsUpdates: true
		}
	},

{
disabled: false,
module: “MMM-NewsFeedTicker”,
position: “bottom_bar”,
//classes: “day_scheduler”,
config: {
feeds: [
{
title: “New York Times”,
url: “http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml”,
customLogo: “NYT_logo_rss_250x40.png”
},
{
title: “USA Today”,
url: “http://rssfeeds.usatoday.com/UsatodaycomNation-TopStories”,
customLogo: “RSS_Syndication_Logo-USATN.png”
},
{
title: “BBC World News”,
url: “http://feeds.bbci.co.uk/news/world/rss.xml#”,
customLogo: “bbc_news_120x60.gif”
}
]
}
},

]

};

Thanks in advance!

What I try to say “the power” does not help. I think the code is sometimes “sloppy”. Not that I could do anything better in terms of coding but just my 2cent…