MagicMirror² v2.12.0 is available! For more information about this release, check out this topic.

MMM-SmartWebDisplay : display web contents (including YouTube) on your MM



  • @AgP42 No worries! Thanks for the reply 🙂



  • Hi
    the module loads initially after updating config.js or rebooting the MM, but it doesn’t refresh the iframe.
    Is there anything in the settings that I should do different?
    Thanks, ueffchen

    {
    		module: 'MMM-SmartWebDisplay',
    		position: 'top_right',	// This can be any of the regions.
    		config: {
    			// See 'Configuration options' for more information.
    			logDebug: false, //set to true to get detailed debug logs. To see them : "Ctrl+Shift+i"
    			height:"330px", //hauteur du cadre en pixel ou %
    			width:"330px", //largeur
                   		updateInterval: 30, //in min. Set it to 0 for no refresh (for videos)
                    	NextURLInterval: 30, //in min, set it to 0 not to have automatic URL change. If only 1 URL given, it will be updated
                    	displayStateInfos: false,	//to display if the module is on autoloop, or stop. 
                    	displayLastUpdate: false, //to display the last update of the URL
    			displayLastUpdateFormat: 'ddd - HH:mm:ss', //format of the date and time to display
                    	url: ["https://gadgets.buienradar.nl/gadget/zoommap/?lat=51.29724&lng=6.84929&overname=2&zoom=11&naam=ratingen&size=2b&voor=1"],         	
    			scrolling: "no" // allow scrolling or not. html 4 only
    			}
    	},
    
    


  • @ueffchen I have the exact same problem. However, for some reason, when I turn the “displayLastUpdate:” to “true”, it begins updating at the interval set in “updateInterval”. Turn it back to “false”, and it stops updating.

    Not ideal, since it displays a line of information I don’t want to see; but it does refresh.

    If someone could help, I would appreciate it too!

    Thank you
    Alain


  • Project Sponsor Module Developer

    @ueffchen said in MMM-SmartWebDisplay : display web contents (including YouTube) on your MM:

    Hi
    the module loads initially after updating config.js or rebooting the MM, but it doesn’t refresh the iframe.
    Is there anything in the settings that I should do different?
    Thanks, ueffchen

    {
    		module: 'MMM-SmartWebDisplay',
    		position: 'top_right',	// This can be any of the regions.
    		config: {
    			// See 'Configuration options' for more information.
    			logDebug: false, //set to true to get detailed debug logs. To see them : "Ctrl+Shift+i"
    			height:"330px", //hauteur du cadre en pixel ou %
    			width:"330px", //largeur
                   		updateInterval: 30, //in min. Set it to 0 for no refresh (for videos)
                    	NextURLInterval: 30, //in min, set it to 0 not to have automatic URL change. If only 1 URL given, it will be updated
                    	displayStateInfos: false,	//to display if the module is on autoloop, or stop. 
                    	displayLastUpdate: false, //to display the last update of the URL
    			displayLastUpdateFormat: 'ddd - HH:mm:ss', //format of the date and time to display
                    	url: ["https://gadgets.buienradar.nl/gadget/zoommap/?lat=51.29724&lng=6.84929&overname=2&zoom=11&naam=ratingen&size=2b&voor=1"],         	
    			scrolling: "no" // allow scrolling or not. html 4 only
    			}
    	},
    
    

    Hi @ueffchen,

    when I test the url on iFrame tester (here : iFrame), I don’t need any refresh, the radar is live display without any refresh.
    Isn’t it the same on the mirror ?

    Otherwise on the config, as you have only 1 URL, this param "NextURLInterval: 30, " has to be set to 0 (but it cannot be the reason of non-refresh…)

    And as you set the "updateInterval: 30, ", then here you request a refresh every 30 MINUTES, was it the refresh you wanted ?

    Bye,
    AgP


  • Project Sponsor Module Developer

    @Alain said in MMM-SmartWebDisplay : display web contents (including YouTube) on your MM:

    @ueffchen I have the exact same problem. However, for some reason, when I turn the “displayLastUpdate:” to “true”, it begins updating at the interval set in “updateInterval”. Turn it back to “false”, and it stops updating.

    Not ideal, since it displays a line of information I don’t want to see; but it does refresh.

    If someone could help, I would appreciate it too!

    Thank you
    Alain

    Hello @Alain ,

    yes strange behavior indeed !

    Could you please share your full config to check what could be wrong ?

    Thanks,
    AgP



  • This post is deleted!


  • I have seen a few examples of people displaying Action-tiles URLs in the MM. The action-tiles team does not allow username and passwords to be passed in the URL, the user must login to Action-tiles and then can navigate directly to the URL. Is there a solution to this requirement within SmartWebDisplay?


  • Project Sponsor Module Developer

    @brotherbrown831
    sorry but I don’t understand what you want to do, do you want to use a URL with a name and password on it ?
    Or do you want to use a pop up to log in and then access a URL ?
    You say “the action-tiles team”, what it this ? Do you have any documentation ?

    Thanks for a bit more detail 😉


  • Project Sponsor Module Developer

    @Newtothis @rafaelcota

    You asked the compatibility with the module MMM-TelegramBot, and I finally took the time today to integrate it.

    It is in “beta” so far, I must now write the documentation (really less fun that writing code 😇 )

    The code is here : https://github.com/AgP42/MMM-SmartWebDisplay/tree/beta, if you could test and let me know your feedback it will be very appreciated !!

    The commands are (still time to change them if you don’t like thoses ones…) :
    /swd_next
    /swd_prev
    /swd_play
    /swd_pause
    /swd_stop
    /swd_url (then the url you want to display on your MagicMirror)
    for example “/swd_url http://magicmirror.builders/

    for the URL I didn’t give the possibility to send a list, but could be improved.

    Thanks for your feedback !


  • Project Sponsor Module Developer

    Hello,

    I finalize the version, it is now available for everyone !

    To update (as every module) :

    cd ~/MagicMirror/modules/MMM-SmartWebDisplay
    git pull
    

    Enjoy 😉


Log in to reply