<![CDATA[MMM-Hotword or voicecontrol - far-field mic]]>Hi,

Considering adding voicecontrol capabilities to my MM by using MMM-Hotword or voiceontrol on my pi3.

Do you think that think kind of mic would do the job?

Sipeed

alt text

Will the module be able to recognize it?

Regards

]]>https://forum.magicmirror.builders/topic/9802/mmm-hotword-or-voicecontrol-far-field-micRSS for NodeSat, 11 Jul 2026 23:42:29 GMTFri, 15 Feb 2019 12:04:26 GMT60<![CDATA[Reply to MMM-Hotword or voicecontrol - far-field mic on Sat, 16 Feb 2019 08:48:00 GMT]]>Indeed…It will also avoid the USB latence issue which I saw in several threads…

There are tons of mic arrays (mainly called ReSpeaker). Some of them are expensive (79USD).

I just found that one which already includes connexion board to the Pi, only have 4 mics but is cheaper. Seems to be a good comprise.

link text

alt text

I just need to figure out how to connect it to the Pi without using / covering the full GPIO as I already have 2 others sensors connected on it.

]]>https://forum.magicmirror.builders/post/52456https://forum.magicmirror.builders/post/52456Sat, 16 Feb 2019 08:48:00 GMT<![CDATA[Reply to MMM-Hotword or voicecontrol - far-field mic on Sat, 16 Feb 2019 01:26:29 GMT]]>That type of mic would solve a TON of problems…currently when using voice and you have music playing the mic seems to fail…but with far field mics it should be a different story… sort of like an Alexa…

]]>https://forum.magicmirror.builders/post/52451https://forum.magicmirror.builders/post/52451Sat, 16 Feb 2019 01:26:29 GMT<![CDATA[Reply to MMM-Hotword or voicecontrol - far-field mic on Fri, 15 Feb 2019 14:13:26 GMT]]>@bolish
I was also checking for a mic in case and found some guys used a mic branded “Andoer”.
Didnt try it yet

]]>https://forum.magicmirror.builders/post/52427https://forum.magicmirror.builders/post/52427Fri, 15 Feb 2019 14:13:26 GMT<![CDATA[Reply to MMM-Hotword or voicecontrol - far-field mic on Fri, 15 Feb 2019 14:14:08 GMT]]>@bolish
I didn’t tried. But if it could be recognized as a recording device on RPI and could be controlled by arecord (or record), it could be usable.

]]>https://forum.magicmirror.builders/post/52414https://forum.magicmirror.builders/post/52414Fri, 15 Feb 2019 14:14:08 GMT