@thedoorsfanatic Thanks, I wasn’t sure what email/username they wanted and I didn’t even have a github profile, so I created one. And then everything worked after that!
Posts made by DæmonEyes
My 1st Smart Mirror Quest
So I came across smart mirrors about 2 years ago and planned on building my own one day, but only recently decided to make it a reality. My goal was to build a good MM while trying to minimize cost where ever possible.
So I wanted a decent size mirror which I could use in my room and felt 12" x 24" was just big enough, but the good frames for that size were harder to find. I’m sure those with wood work experience and the tools could have made their own custom frame for less, but I got an 18" x 24" frame and then added 4" poplar boards to turn it into a shadow box frame. I filled in the 3" gaps on either side with black poster board cut outs.
For the monitor I used the screen from my 1st laptop (it’s about 10 years old) and got the appropriate LCD control board for it with a 3V power adapter.
But then the next issue I had was that my monitor was really heating up on the bottom third in the back. I mean it was so hot in that region that I could not even touch it there for more than a second at a time. So I ordered a pack of self-adhesive heat sinks and they have worked impeccably. In the future I do plan on getting a PIR sensor if I can program it to only turn off the monitor when I’m not in the room, but keep the RPi running 24/7.
And as you can see from the pictures, I really love duct tape. I even used it to make bands to hold everything in place.
A plus point of keeping the bottom open is that the backlight from the monitor acts as a nightlight which was an unexpected surprise. I was going to add LED strips, but cancelled that plan when I saw this.
Raspberry Pi 3 B+ $38
Raspberry Pi 3 B+ Case with Fan, 3 Pcs Heat Sinks, 5V 3A Power Supply $17
LCD Controller Board $25
12V 3A Power Supply Adapter $10
12" x 24" Acrylic See-Through Mirror, 3mm $37
1.5ft HDMI Cable $5
Easycargo 10pcs 20mm Heatsinks $10
Sandisk 32GB microSD $7
Poster Frame 18’‘x24’’ $12 (had a 60% off regular price coupon from T-mobile Tuesdays)
2 x Black Poster Board 20x30 $6
Two 1/2 in. x 4 in. x 4 ft. S4S Poplar Board $12
Sawtooth Hangers $3
Thanks to @MichMich for developing this awesome software.
Special thanks to @sdetweil who was like Gandalf to me on my MM quest where he helped me when I was stuck at the dreaded Unable to install dependencies while trying to install MM and again guiding me when I was trying to further customize my MMM-Compliments module.
Also special thanks to @Mykle1 who introduced me to his MMM-EasyPix module! I have been loving it.
And here is an amateur edited video of the final outcome.
RE: How can I add more time periods for MMM-compliments?
@saschasp Actually I only had to make changes in the
MMM-compliments.jsand not the
I just had to make changes at those 3 places that I showed in the imgur link I had posted and it works great.
sdetweil helped my find the missing comma that was causing the problem with the
npm start devprompt and now it works great.
I now have 5 time periods and 3 compliments for each period. If I think of more compliments, I’ll probably add a 4th compliment for each period.
RE: Cooling solution for LCD monitor?
@roxx I do have a question, isn’t it a bit noisy with your fans setup? I have a small fan that came with my RPi case and set it on low so it is silent.
I also got 10 heat sinks and put them all on the bottom of my monitor back. What used to be too hot to touch for more than a second, now is very cool at all times. I know I didn’t need to put all 10 there, but got carried away and liking the result lol.