Sehr geil, dass du das auf Deutsch machst
Maybe i need this too if you’r done ^^
Sehr geil, dass du das auf Deutsch machst
Maybe i need this too if you’r done ^^
Looks nice, i like the camera idea
What type of “cooling system” do you plan? Active with fan or what?
Iam intrested in the end result of your project with the face recog.
@maxbachmann
Its in the middle behind the thick wood and it detects at least 4m. (would be more if there would be no wood, just the glass
Due to the position across from my wardrobe thats fine but if the range is too faar for detection it would be possible to reduce it with a resistor.
https://github.com/jdesbonnet/RCWL-0516
Thanks
Its 12% and 4mm thick
They have 1, 12, 20, 30 and 40%
https://www.glastroesch.ch/glas/82-spionspiegel.html
Hello Everyone
My Mirror Project is already finished since a couple months, but i had no “time” to post it here.
First, thank you very much @MichMich and @j.e.f.f for this amazing Idea and the modules i can use for this.
It’s a pleasure to stand up in the morning, looking on the screen to see the traffic, calender and weather information in this esthetic manner
The screen is always off until the radard sensor detects motion in front of the display.
I used Douglas wood because its cheap and has intresting visual structure ^^
product | cost |
---|---|
Mirror Glass ~149x36cm (Glas Trösch, Switzerland) | 66€ |
Douglas wood for the frame (OBI) | 25€ |
27" Philips monitor | spare - 0€ |
Raspberry Pi 3 incl. powersupply | ~ 57€ |
Radar sensor (RCWL0516) | 8€ |
DHT22 Temp & Hum Sensor (Seeed 101020019) | 15€ |
Screws and little stuff | ~ 10€ |
Total | ~ 181€ |
Regards and thanks for feedback
Everybody got this message using Google Maps API.
Maybe it would be simpler to reduce the requests instead of looking for an alternative?
I just have 3 routes with https://github.com/jclarke0000/MMM-MyCommute and google says to me all is fine with this $200.
@mkastern Maybe you are still interested.
I tested alot for an idea i had and now i just modified the weatherforecast.css to get this result (top left):
Made this changes:
td {
display: block;
padding-right: 25px
}
tr { display: inline-block;}
.weatherforecast .day {
padding-left: 5px;
}
.weatherforecast .weather-icon {
padding-left: 5px;
}
.weatherforecast .max-temp {
}
.weatherforecast .min-temp {
}
But keep in mind, after an update of MM, your changes get overwritten because it’s an integrated module!
@Mykle1 How do you did the wake up with a webcam?
Let’s say a notebook has always an integrated webcam on top of the display. How do you wake the screen up like a PIR-Sensor does?
And what are your solutions for GPIO related stuff like temperatur sensor or PIR-Sensor (infrared or radar).
Do you always use the laptop screen or how does this look?