arecord sudo only

[sdetweil]

@kupperma chmod and chown are the two commands to change permissions and group assignments

which arecord

will tell you where it is

ls ??? -laF
will give you the current info
??? is the output of which

permissions are 3 settings read/write/execute
for each of 3 user relationships

user - user is the owner
group - user accessing is my the owner, but in the group
other - user accessing is not in the above

3 bits
4 - read
2 - write
1 - execute

7 is all 3
6 is read/write
2 is write only

777 is all permissions for all users ( bad)

each user has their own group as well.

u will need to use sudo to change the permissions or user/group assignments

see the help for each command, for example

chmod --help

[kupperma]

@sdetweil
Thank you for your reply.

pi@raspberrypi:/ $ arecord --format=S16_LE --duration=5 --rate=16000 --file-type=wav out.wav
Aufnahme: WAVE ‘out.wav’ : Signed 16 bit Little Endian, Rate: 16000 Hz, mono
out.wav: Keine Berechtigung

This ist the arecord without sudo

pi@raspberrypi:/ $ sudo arecord --format=S16_LE --duration=5 --rate=16000 --file-type=wav out.wav
Aufnahme: WAVE ‘out.wav’ : Signed 16 bit Little Endian, Rate: 16000 Hz, mono

and here the task with sudo.

ls arecord or find arecord – file or folder not found.

I assume that arecord is part of aplay probably of the alsa family.
But why do tasks of the same family ask for different rights.

Manfred

[sdetweil]

@kupperma oh, you are in the root folder /

it’s the write of out.wav that is causing the problem

cd ~

to go to the users home folder

everything (mm related) should be installed there

generally, never use sudo unless u know WHY u need to do that

[sdetweil]

@kupperma on your ls arecord, file not found

u forgot to do

 which arecord

and use it’s output, the full path to arecord

[kupperma]

@sdetweil
pi@raspberrypi:~ $ which arecord
/usr/bin/arecord

pi@raspberrypi:~ $ ls /usr/bin/arecord -laF
lrwxrwxrwx 1 root root 5 16. Apr 2021 /usr/bin/arecord -> aplay*

Is it that way that I have to set the microphone in MM separately so that the Module MMM-voice will recognize the micophone which is on card 1 device 0.

[sdetweil]

@kupperma said in arecord sudo only:

wxrwxrwx

areceord is execuatble by the user (root) and the group(root) and others (everyone else)

arecord -l

will list recording devices

mmm-voice says config

microphone	REQUIRED	Id of microphone shown in the installer.

shown in the installer <---- thats the key

[kupperma]

@sdetweil
thank you,
I have set in the config of MMM-voice the microphone 1, but there is still an error.
I will ask the developer of MMM-voice.

Manfred