UNSOLVED MMM-Hotword,MMM-AssistanMk2 Hotword no Funktion

MichaelKrems

ello forum
I’ve been trying MMM-Assistant Mk2 and MMM-Hotword on a RaspberryPi 3 with Raspian Buster,for a week ,without success.
Everything starts so far OK “Brief today” is played.
But does not respond to “Smart Mirror” hotword.

Test in the console with Arecord and Aplay function OK
Infos :

arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 1: Device [USB PnP Sound Device], Gerät 0: USB Audio [USB Audio]
  Sub-Geräte: 0/1
  Sub-Gerät #0: subdevice #0
Config.js
/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "10.0.0.15",
		              //"localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: //["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
                     [], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
  	timeFormat: "24",
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
	//	{
	//	    module: "MMM-GoogleAssistant",
	//	    position: "top_right",
	//	    config: {
	//	        maxWidth: "100%",
	//	        header: "",
	//	    publishKey: "pub-c-9ce2adff-cdc9-497e-a81b-a0f2f64b3fc1",
	//	    subscribeKey: " sub-c-a337d0f8-e9ea-11e9-914e-0a6be83abca1",
	//	    updateDelay: 500
	//	    }
	//	},	
		{
			module: "calendar",
			header: "kommende Termine",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
					//	url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics",
                                               url: "webcal://mail.bruedergros.at/owa/calendar/e27e09b9651248a8870f91463c14603d@bruedergros.at/993da715237941099626d16d0da2631f3462472444406405802/S-1-8-2874105991-1718106435-1479008544-2259784499/reachcalendar.ics" ,
					//	url: "https://calendar.google.com/calendar/ical/salzer.michael2164%40gmail.com/public/basic.ics" ,
					}
				]
			}
		},
//		{
//			module: "compliments",
//			position: "lower_third",
//			config: {
//			 remoteFile:	"https://raw.githubusercontent.com/michadenheijer/MagicMirrorCompliments/master/de.json"
  //  }
//		},
		{
			module: "currentweather",
			position: "top_center",
			config: {
				location: "Elsarn im Strassertal",
				locationID: "7871800",  //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "8a19f8f173506892e56e500859f045ba"
			

                         	}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Elsarn im Strassertal",
				locationID: "7871800",  //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "8a19f8f173506892e56e500859f045ba"
			}
		},
				{
  module: "MMM-News",
  position: "bottom_bar",
  config: {
    apiKey : "663c4ed685354fa7a0c432bb25ed5e53",
    type: "horizontal",
    query : [
      {
        sources: "bild,abc-news, cnn",
      },
      {
        country: "at",
        className: "redTitle",
      },
      {
        country: "at",
        category: "sports",
        q : ""
      }
    ],
  }
},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						//title: "New York times",
					       //url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
						title:"OE3",
					        url:"https://rss.orf.at/news.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Did I miss something? Thankful for any tip or hint.
Translated by Google in English

MichaelKrems

Sorry posted Wrong config.js
This is for MMM -Assistant

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "de",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		//{
		//	module: "calendar",
		//	header: "US Holidays",
		//	position: "top_left",
		//	config: {
		//		calendars: [
		//			{
		//				symbol: "calendar-check",
		//				url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
		//		]
		//	}
		//},
		{
			module: "compliments",
			position: "lower_third"
		},
		//{
		//	module: "currentweather",
		//	position: "top_right",
		//	config: {
		//		location: "New York",
		//		locationID: "",  //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
		//		appid: "YOUR_OPENWEATHER_API_KEY"
		//	}
		//},
		//{
		//	module: "weatherforecast",
		//	position: "top_right",
		//	header: "Weather Forecast",
		//	config: {
		//		location: "New York",
		//		locationID: "5128581",  //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
		//		appid: "YOUR_OPENWEATHER_API_KEY"
		//	}
		//},
		//{
		//	module: "newsfeed",
		//	position: "bottom_bar",
		//	config: {
		//		feeds: [
		//			{
		//				title: "New York Times",
		//				url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
		//			}
		//		],
		//		showSourceTitle: true,
		//		showPublishDate: true,
		//		broadcastNewsFeeds: true,
		//		broadcastNewsUpdates: true
		//	}
		//},

		{
	module: "MMM-Hotword",
	position: "top_right",
	config: {
		// chimeOnFinish: null,
		detectorAudioGain: 2.0,
		detectorApplyFrontend: false, // When you are using `.pmdl`, set this to `false`.
		// For `.umdl`, When you use only`snowboy` and `smart_mirror`, `false` is better. But with other models, `true` is better.

		mic: {
  recordProgram : "arecord", //record prgram, `rec`, `arecord`, `sox`, `parec` is available
  device        : "plughw:1",
  sampleRate    : 16000,  // audio sample rate
  channels      : 1,      // number of channels
  threshold     : 0.5,
  thresholdStart: null,
  thresholdEnd  : null,
  silence       : 1.0, // detect end of your hotword or afterRecord.
  verbose       : false,  // log info to the console
},

recipes: [],
models: [],
commands: {},
defaultCommand: {
  notificationExec: {
    notification: "HOTWORD_DETECTED",
    payload: (detected, afterRecord) => {
      return {hotword:detected, file:afterRecord}
    }
  }
},

chimeOnFinish: "resources/ding.wav", // If you don't want to use chime, set this to null.
useDisplay: true,
iconify: "https://code.iconify.design/1/1.0.2/iconify.min.js",
//iconify: null,
//When you use this module with `MMM-CalendarExt2`, `MMM-Spotify` or any other `iconify` used modules together, Set this to null.

icons: { //https://iconify.design/icon-sets/
  waiting: "uil-comment-message",
  detected: "uil-comment-exclamation",
  finished: "uil-comment-dots",
},

// customizable notification trigger
notifications: {
  PAUSE: "HOTWORD_PAUSE",
  RESUME: "HOTWORD_RESUME",
  LISTENING : "HOTWORD_LISTENING",
  SLEEPING : "HOTWORD_SLEEPING",
  ERROR : "HOTWORD_ERROR",
  DETECTED: "HOTWORD_DETECTED"
},
		//mic: {
		//	recordProgram: "arecord",
		//		device: "default"
		//},
		models: [
			{
				hotwords    : "smart_mirror",
				file        : "smart_mirror.umdl",
				sensitivity : "0.5",
			},
		],
		commands: {
			"smart_mirror": {
				notificationExec: {
					notification: "ASSISTANT_ACTIVATE",
					payload: (detected, afterRecord) => {
						return {profile:"default"}
					}
				},
		models: [
  {
    hotwords    : "Magic_Mirror",
    file        : "Magic_Mirror.pmdl",
    sensitivity : "0.5",
  },
],
commands: {
  "volume_up" : {
    notificationExec: {
      notification: "VOLUME_UP"
    }
  }
},
				restart:false,
				afterRecordLimit:0
			}
		}
	}
},
{
	module: "MMM-AssistantMk2",
	position: "top_right",
	config: {
		deviceLocation: {
			coordinates: {
				latitude: 37.5650168, // -90.0 - +90.0
				longitude: 126.8491231, // -180.0 - +180.0
			},
		},
		record: {
			recordProgram : "arecord",  
			device        : "plughw:1",
		},
		notifications: {
			ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
			ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
		},
		useWelcomeMessage: "brief today",
		profiles: {
			"default" : {
				lang: "de-DE"
			}
		},
	}
},
	]

};

		



/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Sean

@MichaelKrems
You don’t need to use all of the fields of configuration sample.

Just try from here;

https://github.com/eouia/MMM-AssistantMk2/wiki/Configuration#with-mmm-hotwordv2 (with MMM-Hotword(v2) section)

guongthongminh

@Sean You can help me with the command exec section, calling the browser with the parameter as well as the command line in mmm-hotword

Sean

@guongthongminh Sorry, I can’t catch your intention. What exactly do you want to do?

guongthongminh

@Sean Can you help me with the website part shown on the mirror?

guongthongminh

@Sean using MMM-NotificationTrigger to invoke the voice search browser

Sean

@guongthongminh
Do you mean, you want to show specific web page when you say hotword?
In that case, which module are you using to show web page?

guongthongminh

@Sean Can I use the default browser, Chromium?
MMM-PageReader is also possible.
Sorry for not good at english!

Sean

@guongthongminh
First, using default Browser(Chromium) is not so good idea. You could lose control.
I’m reading MMM-PageReader(https://github.com/dgburr/MMM-PageReader) now, it seems possible to use.

models: [
  {
    hotwords    : "smart_mirror",
    file        : "smart_mirror.umdl",
    sensitivity : "0.5",
  },
  // You can add more models here.
],
commands: {
  "smart_mirror": {
    notificationExec: {
      notification: "PAGE_READER_LOAD",
      payload: "https://forum.magicmirror.builders/topic...."
    }
  },
// You can add more commands here
}

In this example, you can activate MMM-PageReader with hotword “smart mirror”. Not tested, but ideally working like this.