Error performing TLS handshake: An unexpected TLS packet was received

sdetweil

@Keudn do a
pm2 status
Command. Check the paths and commands

My setup starts chrome for the browser on pi 0.

For the config, run

npm check:config

From the MagicMirror folder.

If that is ok
Then do npm start to see any node_helper errors

Keudn

@sdetweil pm2 status gives me two ids, MagicMirror and mmstart. I’m assuming MagicMirror is the one your script creates. When I try and run pm2 stop I just get “Process not found” error and can’t actually disable it.

Running npm check:config doesn’t seem to be a valid command as it gives me a usage list and asks if I meant “config”.

Doing npm start gives this output

$ npm start

> magicmirror@2.10.0-develop start /home/pi/MagicMirror
> ./run-start.sh

0 [LOG] Starting MagicMirror: v2.10.0-develop
0 [LOG] Loading config ...
[21:27:45.455] [ERROR]  WARNING! Could not validate config file. Starting with default configuration. Please correct syntax errors at or above this line: /home/pi/MagicMirror/config/config.js:87
*               {
^

SyntaxError: Unexpected token *
    at Module._compile (internal/modules/cjs/loader.js:721:23)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
    at Function.Module._load (internal/modules/cjs/loader.js:585:3)
    at Module.require (internal/modules/cjs/loader.js:690:17)
    at require (internal/modules/cjs/helpers.js:25:18)
    at loadConfig (/home/pi/MagicMirror/js/app.js:67:12)
    at App.start (/home/pi/MagicMirror/js/app.js:208:3)
    at Object.<anonymous> (/home/pi/MagicMirror/serveronly/index.js:2:5)
[21:27:45.484] [LOG] Loading module helpers ...
[21:27:45.825] [LOG] Initializing new module helper ...
[21:27:45.836] [LOG] Module helper loaded: updatenotification
[21:27:45.853] [LOG] No helper found for module: helloworld.
0 [LOG] All module helpers loaded.
[21:27:45.871] [LOG] Starting server on port 8080 ...
0 [LOG] Server started ...
0 [LOG] Connecting socket for: updatenotification
0 [LOG] Sockets connected & modules started ...
0 [LOG]
Ready to go! Please point your browser to: http://localhost:8080
Starting chromium browser now, have patience, it takes a minute
[21:27:46.284] [ERROR]  { Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at GetAddrInfoReqWrap.doListen [as callback] (net.js:1460:7)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:61:10)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080 }
Created new window in existing browser session.

sdetweil

@Keudn pm2 stop 0 or 1 ( or use there name)
pm2 delete 0 or 1

Edit the config and fix line 86 with that *

Keudn

@sdetweil Got the mmstart process deleted, but now the mirror hangs at the booting up screen with the command line on the top. I can access it correctly from a browser on another computer, so it looks like it just isn’t opening a web browser locally on the Pi.

sdetweil

@Keudn the new run-start.sh script is waiting for the server process to say its ready
then it starts the browser

u should be able to test it

~/MagicMirror
bash -x run-start.sh

starts mm in serveronly mode (on pi 0)

loops reading console output, waiting for the message
“point\ your\ browser”
then launches chromium-browser

but if that message doesn’t come… it will be hung…

so, try

~/MagicMirror
node serveronly

should look like this (with your module list)

~/MagicMirror$ node serveronly
[23:31:31.854] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:31:31.865] [LOG]    Loading config ...
[23:31:31.871] [LOG]    Loading module helpers ...
[23:31:31.874] [LOG]    No helper found for module: alert.
[23:31:31.925] [LOG]    Initializing new module helper ...
[23:31:31.925] [LOG]    Module helper loaded: updatenotification
[23:31:31.927] [LOG]    No helper found for module: clock.
[23:31:31.928] [LOG]    No helper found for module: currentweather.
[23:31:31.929] [LOG]    No helper found for module: weatherforecast.
[23:31:32.508] [LOG]    Initializing new module helper ...
[23:31:32.509] [LOG]    Module helper loaded: newsfeed
[23:31:32.759] [LOG]    Initializing new module helper ...
[23:31:32.760] [LOG]    Module helper loaded: MMM-CalendarExt2
[23:31:32.771] [LOG]    handler helper in init
[23:31:32.772] [LOG]    Module helper loaded: ImageService
[23:31:34.273] [LOG]    scheduler helper in init
[23:31:34.273] [LOG]    Module helper loaded: ImageScheduler
[23:31:34.274] [LOG]    All module helpers loaded.
[23:31:34.275] [LOG]    Starting server on port 8080 ...
[23:31:34.281] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:31:34.288] [LOG]    Server started ...
[23:31:34.289] [LOG]    Connecting socket for: updatenotification
[23:31:34.290] [LOG]    Connecting socket for: newsfeed
[23:31:34.290] [LOG]    Starting module: newsfeed
[23:31:34.291] [LOG]    Connecting socket for: MMM-CalendarExt2
[23:31:34.291] [LOG]    Connecting socket for: ImageService
[23:31:34.292] [LOG]    handler helper in start
[23:31:34.292] [LOG]    Connecting socket for: ImageScheduler
[23:31:34.293] [LOG]    scheduler helper in start
[23:31:34.293] [LOG]    Sockets connected & modules started ...
[23:31:34.293] [LOG]
Ready to go! Please point your browser to: http://localhost:8080

Keudn

@sdetweil Both commands get it to “Ready to go! Please point your browser…”, but it is immediately followed by

~/MagicMirror $ node serveronly
[23:41:39.439] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:41:39.530] [LOG]    Loading config ...
[23:41:39.604] [LOG]    Loading module helpers ...
[23:41:39.617] [LOG]    No helper found for module: alert.
[23:41:39.624] [LOG]    No helper found for module: clock.
[23:41:42.789] [LOG]    Initializing new module helper ...
[23:41:42.795] [LOG]    Module helper loaded: calendar
[23:41:45.193] [LOG]    Initializing new module helper ...
[23:41:45.198] [LOG]    Module helper loaded: MMM-Weather-Now
[23:41:45.224] [LOG]    Initializing new module helper ...
[23:41:45.236] [LOG]    Module helper loaded: MMM-3Day-Forecast
[23:41:45.247] [LOG]    Initializing new module helper ...
[23:41:45.254] [LOG]    Module helper loaded: MMM-MoonPhase
[23:41:45.269] [LOG]    Initializing new module helper ...
[23:41:45.274] [LOG]    Module helper loaded: MMM-MyScoreboard
[23:41:45.279] [LOG]    All module helpers loaded.
[23:41:45.289] [LOG]    Starting server on port 8080 ...
[23:41:45.338] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:41:45.394] [LOG]    Server started ...
[23:41:45.401] [LOG]    Connecting socket for: calendar
[23:41:45.407] [LOG]    Starting node helper for: calendar
[23:41:45.412] [LOG]    Connecting socket for: MMM-Weather-Now
[23:41:45.418] [LOG]    MMM-Weather-Now helper, started...
[23:41:45.424] [LOG]    Connecting socket for: MMM-3Day-Forecast
[23:41:45.429] [LOG]    MMM-3Day-Forecast helper, started...
[23:41:45.434] [LOG]    Connecting socket for: MMM-MoonPhase
[23:41:45.438] [LOG]    Starting module helper: MMM-MoonPhase
[23:41:45.443] [LOG]    Connecting socket for: MMM-MyScoreboard
[23:41:45.448] [LOG]    Starting node_helper for module [MMM-MyScoreboard]
[23:41:50.375] [LOG]    Sockets connected & modules started ...
[23:41:50.381] [LOG]
Ready to go! Please point your browser to: http://0.0.0.0:8080
[23:41:50.456] [LOG]    Whoops! There was an uncaught exception...
[23:41:50.462] [ERROR]  { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at doListen (net.js:1460:7)
    at process._tickCallback (internal/process/next_tick.js:63:19)
    at Function.Module.runMain (internal/modules/cjs/loader.js:832:11)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3)

  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080 }
[23:41:50.528] [LOG]    MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[23:41:50.533] [LOG]    If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

I’m not sure why there would be the address already in use unless it already started correctly. In that case why would the browser not open?

sdetweil

@Keudn because the pm2 instance is running…

Keudn

@sdetweil Yeah, I just don’t understand why running “bash -x run-start.sh” would give the exact same output as “node serveronly” and not open the browser once it sees it is ready. The run-start.sh script doesn’t get to the #start chromium section.

When I run “bash -x run-start.sh” this is the output I get

$ bash -x run-start.sh
+ ./untrack-css.sh
+ '[' -z '' ']'
+ export DISPLAY=:0
+ DISPLAY=:0
++ uname -m
+ arch=armv6l
++ awk '{print tolower($2)}'
++ tr -d ',"'\'''
++ grep -i serveronly: config/config.js
+ serveronly=
+ serveronly=false
++ pgrep Xorg
+ xorg=
++ uname
+ mac=Linux
+ '[' false. '!=' false. -o armv6l == armv6l ']'
+ '[' false. == true. -o . == . ']'
+ node serveronly
[23:50:08.974] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:50:09.097] [LOG]    Loading config ...
[23:50:09.217] [LOG]    Loading module helpers ...
[23:50:09.236] [LOG]    No helper found for module: alert.
[23:50:09.245] [LOG]    No helper found for module: clock.
[23:50:13.447] [LOG]    Initializing new module helper ...
[23:50:13.458] [LOG]    Module helper loaded: calendar
[23:50:16.551] [LOG]    Initializing new module helper ...
[23:50:16.568] [LOG]    Module helper loaded: MMM-Weather-Now
[23:50:16.610] [LOG]    Initializing new module helper ...
[23:50:16.649] [LOG]    Module helper loaded: MMM-3Day-Forecast
[23:50:16.685] [LOG]    Initializing new module helper ...
[23:50:16.694] [LOG]    Module helper loaded: MMM-MoonPhase
[23:50:16.725] [LOG]    Initializing new module helper ...
[23:50:16.734] [LOG]    Module helper loaded: MMM-MyScoreboard
[23:50:16.740] [LOG]    All module helpers loaded.
[23:50:16.754] [LOG]    Starting server on port 8080 ...
[23:50:16.822] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:50:16.899] [LOG]    Server started ...
[23:50:16.910] [LOG]    Connecting socket for: calendar
[23:50:16.918] [LOG]    Starting node helper for: calendar
[23:50:16.924] [LOG]    Connecting socket for: MMM-Weather-Now
[23:50:16.932] [LOG]    MMM-Weather-Now helper, started...
[23:50:16.937] [LOG]    Connecting socket for: MMM-3Day-Forecast
[23:50:16.944] [LOG]    MMM-3Day-Forecast helper, started...
[23:50:16.951] [LOG]    Connecting socket for: MMM-MoonPhase
[23:50:16.956] [LOG]    Starting module helper: MMM-MoonPhase
[23:50:16.965] [LOG]    Connecting socket for: MMM-MyScoreboard
[23:50:16.970] [LOG]    Starting node_helper for module [MMM-MyScoreboard]
[23:50:23.495] [LOG]    Sockets connected & modules started ...
[23:50:23.506] [LOG]
Ready to go! Please point your browser to: http://0.0.0.0:8080
[23:50:23.607] [LOG]    Whoops! There was an uncaught exception...
[23:50:23.615] [ERROR]  { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at doListen (net.js:1460:7)
    at process._tickCallback (internal/process/next_tick.js:63:19)
    at Function.Module.runMain (internal/modules/cjs/loader.js:832:11)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3)

  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080 }
[23:50:23.702] [LOG]    MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[23:50:23.706] [LOG]    If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

sdetweil

@Keudn right, but the run failed, cause of the address in use problem… need to stop the other instance to test…

pm2 stop MagicMirror

sdetweil

@Keudn do this

grep -i serveronly: config/config.js

should return a null line