Error performing TLS handshake: An unexpected TLS packet was received

sdetweil

@Keudn rename the MagicMirror folder to something else and then run the command.

it will do all the work…
(this is just an updated version of the same command in the MM readme and on the github site)

it will prompt if u want to use pm2 to autostart at boot
and ask if u want to turn off screen saver

Keudn

@sdetweil I renamed the old Magic Mirror folder and ran the command. It seemed to install correctly, but when it boots I get a “Please create a config file” message even though I copied the one I had from the old folder over and installed the modules again. I am also still getting the Midori error first, so it seems like the previous install is still trying to start.

sdetweil

@Keudn do a
pm2 status
Command. Check the paths and commands

My setup starts chrome for the browser on pi 0.

For the config, run

npm check:config

From the MagicMirror folder.

If that is ok
Then do npm start to see any node_helper errors

Keudn

@sdetweil pm2 status gives me two ids, MagicMirror and mmstart. I’m assuming MagicMirror is the one your script creates. When I try and run pm2 stop I just get “Process not found” error and can’t actually disable it.

Running npm check:config doesn’t seem to be a valid command as it gives me a usage list and asks if I meant “config”.

Doing npm start gives this output

$ npm start

> magicmirror@2.10.0-develop start /home/pi/MagicMirror
> ./run-start.sh

0 [LOG] Starting MagicMirror: v2.10.0-develop
0 [LOG] Loading config ...
[21:27:45.455] [ERROR]  WARNING! Could not validate config file. Starting with default configuration. Please correct syntax errors at or above this line: /home/pi/MagicMirror/config/config.js:87
*               {
^

SyntaxError: Unexpected token *
    at Module._compile (internal/modules/cjs/loader.js:721:23)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:787:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
    at Function.Module._load (internal/modules/cjs/loader.js:585:3)
    at Module.require (internal/modules/cjs/loader.js:690:17)
    at require (internal/modules/cjs/helpers.js:25:18)
    at loadConfig (/home/pi/MagicMirror/js/app.js:67:12)
    at App.start (/home/pi/MagicMirror/js/app.js:208:3)
    at Object.<anonymous> (/home/pi/MagicMirror/serveronly/index.js:2:5)
[21:27:45.484] [LOG] Loading module helpers ...
[21:27:45.825] [LOG] Initializing new module helper ...
[21:27:45.836] [LOG] Module helper loaded: updatenotification
[21:27:45.853] [LOG] No helper found for module: helloworld.
0 [LOG] All module helpers loaded.
[21:27:45.871] [LOG] Starting server on port 8080 ...
0 [LOG] Server started ...
0 [LOG] Connecting socket for: updatenotification
0 [LOG] Sockets connected & modules started ...
0 [LOG]
Ready to go! Please point your browser to: http://localhost:8080
Starting chromium browser now, have patience, it takes a minute
[21:27:46.284] [ERROR]  { Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at GetAddrInfoReqWrap.doListen [as callback] (net.js:1460:7)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:61:10)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080 }
Created new window in existing browser session.

sdetweil

@Keudn pm2 stop 0 or 1 ( or use there name)
pm2 delete 0 or 1

Edit the config and fix line 86 with that *

Keudn

@sdetweil Got the mmstart process deleted, but now the mirror hangs at the booting up screen with the command line on the top. I can access it correctly from a browser on another computer, so it looks like it just isn’t opening a web browser locally on the Pi.

sdetweil

@Keudn the new run-start.sh script is waiting for the server process to say its ready
then it starts the browser

u should be able to test it

~/MagicMirror
bash -x run-start.sh

starts mm in serveronly mode (on pi 0)

loops reading console output, waiting for the message
“point\ your\ browser”
then launches chromium-browser

but if that message doesn’t come… it will be hung…

so, try

~/MagicMirror
node serveronly

should look like this (with your module list)

~/MagicMirror$ node serveronly
[23:31:31.854] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:31:31.865] [LOG]    Loading config ...
[23:31:31.871] [LOG]    Loading module helpers ...
[23:31:31.874] [LOG]    No helper found for module: alert.
[23:31:31.925] [LOG]    Initializing new module helper ...
[23:31:31.925] [LOG]    Module helper loaded: updatenotification
[23:31:31.927] [LOG]    No helper found for module: clock.
[23:31:31.928] [LOG]    No helper found for module: currentweather.
[23:31:31.929] [LOG]    No helper found for module: weatherforecast.
[23:31:32.508] [LOG]    Initializing new module helper ...
[23:31:32.509] [LOG]    Module helper loaded: newsfeed
[23:31:32.759] [LOG]    Initializing new module helper ...
[23:31:32.760] [LOG]    Module helper loaded: MMM-CalendarExt2
[23:31:32.771] [LOG]    handler helper in init
[23:31:32.772] [LOG]    Module helper loaded: ImageService
[23:31:34.273] [LOG]    scheduler helper in init
[23:31:34.273] [LOG]    Module helper loaded: ImageScheduler
[23:31:34.274] [LOG]    All module helpers loaded.
[23:31:34.275] [LOG]    Starting server on port 8080 ...
[23:31:34.281] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:31:34.288] [LOG]    Server started ...
[23:31:34.289] [LOG]    Connecting socket for: updatenotification
[23:31:34.290] [LOG]    Connecting socket for: newsfeed
[23:31:34.290] [LOG]    Starting module: newsfeed
[23:31:34.291] [LOG]    Connecting socket for: MMM-CalendarExt2
[23:31:34.291] [LOG]    Connecting socket for: ImageService
[23:31:34.292] [LOG]    handler helper in start
[23:31:34.292] [LOG]    Connecting socket for: ImageScheduler
[23:31:34.293] [LOG]    scheduler helper in start
[23:31:34.293] [LOG]    Sockets connected & modules started ...
[23:31:34.293] [LOG]
Ready to go! Please point your browser to: http://localhost:8080

Keudn

@sdetweil Both commands get it to “Ready to go! Please point your browser…”, but it is immediately followed by

~/MagicMirror $ node serveronly
[23:41:39.439] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:41:39.530] [LOG]    Loading config ...
[23:41:39.604] [LOG]    Loading module helpers ...
[23:41:39.617] [LOG]    No helper found for module: alert.
[23:41:39.624] [LOG]    No helper found for module: clock.
[23:41:42.789] [LOG]    Initializing new module helper ...
[23:41:42.795] [LOG]    Module helper loaded: calendar
[23:41:45.193] [LOG]    Initializing new module helper ...
[23:41:45.198] [LOG]    Module helper loaded: MMM-Weather-Now
[23:41:45.224] [LOG]    Initializing new module helper ...
[23:41:45.236] [LOG]    Module helper loaded: MMM-3Day-Forecast
[23:41:45.247] [LOG]    Initializing new module helper ...
[23:41:45.254] [LOG]    Module helper loaded: MMM-MoonPhase
[23:41:45.269] [LOG]    Initializing new module helper ...
[23:41:45.274] [LOG]    Module helper loaded: MMM-MyScoreboard
[23:41:45.279] [LOG]    All module helpers loaded.
[23:41:45.289] [LOG]    Starting server on port 8080 ...
[23:41:45.338] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:41:45.394] [LOG]    Server started ...
[23:41:45.401] [LOG]    Connecting socket for: calendar
[23:41:45.407] [LOG]    Starting node helper for: calendar
[23:41:45.412] [LOG]    Connecting socket for: MMM-Weather-Now
[23:41:45.418] [LOG]    MMM-Weather-Now helper, started...
[23:41:45.424] [LOG]    Connecting socket for: MMM-3Day-Forecast
[23:41:45.429] [LOG]    MMM-3Day-Forecast helper, started...
[23:41:45.434] [LOG]    Connecting socket for: MMM-MoonPhase
[23:41:45.438] [LOG]    Starting module helper: MMM-MoonPhase
[23:41:45.443] [LOG]    Connecting socket for: MMM-MyScoreboard
[23:41:45.448] [LOG]    Starting node_helper for module [MMM-MyScoreboard]
[23:41:50.375] [LOG]    Sockets connected & modules started ...
[23:41:50.381] [LOG]
Ready to go! Please point your browser to: http://0.0.0.0:8080
[23:41:50.456] [LOG]    Whoops! There was an uncaught exception...
[23:41:50.462] [ERROR]  { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at doListen (net.js:1460:7)
    at process._tickCallback (internal/process/next_tick.js:63:19)
    at Function.Module.runMain (internal/modules/cjs/loader.js:832:11)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3)

  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080 }
[23:41:50.528] [LOG]    MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[23:41:50.533] [LOG]    If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

I’m not sure why there would be the address already in use unless it already started correctly. In that case why would the browser not open?

sdetweil

@Keudn because the pm2 instance is running…

Keudn

@sdetweil Yeah, I just don’t understand why running “bash -x run-start.sh” would give the exact same output as “node serveronly” and not open the browser once it sees it is ready. The run-start.sh script doesn’t get to the #start chromium section.

When I run “bash -x run-start.sh” this is the output I get

$ bash -x run-start.sh
+ ./untrack-css.sh
+ '[' -z '' ']'
+ export DISPLAY=:0
+ DISPLAY=:0
++ uname -m
+ arch=armv6l
++ awk '{print tolower($2)}'
++ tr -d ',"'\'''
++ grep -i serveronly: config/config.js
+ serveronly=
+ serveronly=false
++ pgrep Xorg
+ xorg=
++ uname
+ mac=Linux
+ '[' false. '!=' false. -o armv6l == armv6l ']'
+ '[' false. == true. -o . == . ']'
+ node serveronly
[23:50:08.974] [LOG]    Starting MagicMirror: v2.10.0-develop
[23:50:09.097] [LOG]    Loading config ...
[23:50:09.217] [LOG]    Loading module helpers ...
[23:50:09.236] [LOG]    No helper found for module: alert.
[23:50:09.245] [LOG]    No helper found for module: clock.
[23:50:13.447] [LOG]    Initializing new module helper ...
[23:50:13.458] [LOG]    Module helper loaded: calendar
[23:50:16.551] [LOG]    Initializing new module helper ...
[23:50:16.568] [LOG]    Module helper loaded: MMM-Weather-Now
[23:50:16.610] [LOG]    Initializing new module helper ...
[23:50:16.649] [LOG]    Module helper loaded: MMM-3Day-Forecast
[23:50:16.685] [LOG]    Initializing new module helper ...
[23:50:16.694] [LOG]    Module helper loaded: MMM-MoonPhase
[23:50:16.725] [LOG]    Initializing new module helper ...
[23:50:16.734] [LOG]    Module helper loaded: MMM-MyScoreboard
[23:50:16.740] [LOG]    All module helpers loaded.
[23:50:16.754] [LOG]    Starting server on port 8080 ...
[23:50:16.822] [INFO]   You're using a full whitelist configuration to allow for all IPs
[23:50:16.899] [LOG]    Server started ...
[23:50:16.910] [LOG]    Connecting socket for: calendar
[23:50:16.918] [LOG]    Starting node helper for: calendar
[23:50:16.924] [LOG]    Connecting socket for: MMM-Weather-Now
[23:50:16.932] [LOG]    MMM-Weather-Now helper, started...
[23:50:16.937] [LOG]    Connecting socket for: MMM-3Day-Forecast
[23:50:16.944] [LOG]    MMM-3Day-Forecast helper, started...
[23:50:16.951] [LOG]    Connecting socket for: MMM-MoonPhase
[23:50:16.956] [LOG]    Starting module helper: MMM-MoonPhase
[23:50:16.965] [LOG]    Connecting socket for: MMM-MyScoreboard
[23:50:16.970] [LOG]    Starting node_helper for module [MMM-MyScoreboard]
[23:50:23.495] [LOG]    Sockets connected & modules started ...
[23:50:23.506] [LOG]
Ready to go! Please point your browser to: http://0.0.0.0:8080
[23:50:23.607] [LOG]    Whoops! There was an uncaught exception...
[23:50:23.615] [ERROR]  { Error: listen EADDRINUSE: address already in use 0.0.0.0:8080
    at Server.setupListenHandle [as _listen2] (net.js:1279:14)
    at listenInCluster (net.js:1327:12)
    at doListen (net.js:1460:7)
    at process._tickCallback (internal/process/next_tick.js:63:19)
    at Function.Module.runMain (internal/modules/cjs/loader.js:832:11)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:622:3)

  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '0.0.0.0',
  port: 8080 }
[23:50:23.702] [LOG]    MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[23:50:23.706] [LOG]    If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues