A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
Error [ERR_STREAM_DESTROYED]
-
@jorgnyg once it fails, that code is dead…
this is probably a timing error, because the 0 is slower than the rest
will look at it…
-
@jorgnyg can u do
pm2 logs --lines=100
(note two dashes) -
@sdetweil Yes I agree with the timing error fault. we just have to figure out where.
Log output here:
:::TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option) /home/pi/.pm2/pm2.log last 100 lines: PM2 | 2020-01-10T22:33:44: PM2 log: Stopping app:mm id:0 PM2 | 2020-01-10T22:33:45: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:46: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:47: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:47: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:47: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:47: PM2 log: pid=3185 msg=failed to kill - retrying in 100ms PM2 | 2020-01-10T22:33:47: PM2 log: Process with pid 3185 still alive after 1600ms, sending it SIGKILL now... PM2 | 2020-01-10T22:33:49: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL] PM2 | 2020-01-10T22:33:49: PM2 log: pid=3185 msg=process killed PM2 | 2020-01-10T22:35:20: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2020-01-10T22:35:20: PM2 log: App [mm:0] online PM2 | 2020-01-11T00:06:25: PM2 log: Stopping app:mm id:0 PM2 | 2020-01-11T00:06:27: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:27: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:27: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:27: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:28: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:29: PM2 log: pid=4479 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:06:29: PM2 log: Process with pid 4479 still alive after 1600ms, sending it SIGKILL now... PM2 | 2020-01-11T00:06:31: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL] PM2 | 2020-01-11T00:06:31: PM2 log: pid=4479 msg=process killed PM2 | 2020-01-11T00:07:12: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2020-01-11T00:07:12: PM2 log: App [mm:0] online PM2 | 2020-01-11T00:11:39: PM2 log: Stopping app:mm id:0 PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:41: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: pid=11984 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T00:11:42: PM2 log: Process with pid 11984 still alive after 1600ms, sending it SIGKILL now... PM2 | 2020-01-11T00:11:45: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL] PM2 | 2020-01-11T00:11:45: PM2 log: pid=11984 msg=process killed PM2 | 2020-01-11T00:22:43: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2020-01-11T00:22:43: PM2 log: App [mm:0] online PM2 | 2020-01-11T09:32:55: PM2 log: =============================================================================== PM2 | 2020-01-11T09:32:55: PM2 log: --- New PM2 Daemon started ---------------------------------------------------- PM2 | 2020-01-11T09:32:55: PM2 log: Time : Sat Jan 11 2020 09:32:55 GMT+0100 (Central European Standard Time) PM2 | 2020-01-11T09:32:55: PM2 log: PM2 version : 4.2.1 PM2 | 2020-01-11T09:32:55: PM2 log: Node.js version : 10.18.1 PM2 | 2020-01-11T09:32:55: PM2 log: Current arch : arm PM2 | 2020-01-11T09:32:55: PM2 log: PM2 home : /home/pi/.pm2 PM2 | 2020-01-11T09:32:55: PM2 log: PM2 PID file : /home/pi/.pm2/pm2.pid PM2 | 2020-01-11T09:32:55: PM2 log: RPC socket file : /home/pi/.pm2/rpc.sock PM2 | 2020-01-11T09:32:55: PM2 log: BUS socket file : /home/pi/.pm2/pub.sock PM2 | 2020-01-11T09:32:55: PM2 log: Application log path : /home/pi/.pm2/logs PM2 | 2020-01-11T09:32:55: PM2 log: Worker Interval : 30000 PM2 | 2020-01-11T09:32:55: PM2 log: Process dump file : /home/pi/.pm2/dump.pm2 PM2 | 2020-01-11T09:32:55: PM2 log: Concurrent actions : 2 PM2 | 2020-01-11T09:32:55: PM2 log: SIGTERM timeout : 1600 PM2 | 2020-01-11T09:32:55: PM2 log: =============================================================================== PM2 | 2020-01-11T09:32:57: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2020-01-11T09:32:57: PM2 log: App [mm:0] online PM2 | 2020-01-11T09:41:08: PM2 log: Stopping app:mm id:0 PM2 | 2020-01-11T09:41:10: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:11: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:12: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:12: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:12: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:12: PM2 log: pid=827 msg=failed to kill - retrying in 100ms PM2 | 2020-01-11T09:41:12: PM2 log: Process with pid 827 still alive after 1600ms, sending it SIGKILL now... PM2 | 2020-01-11T09:41:14: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL] PM2 | 2020-01-11T09:41:14: PM2 log: pid=827 msg=process killed /home/pi/.pm2/logs/mm-out.log last 100 lines: 0|mm | [22:35:42.053] [LOG] Starting node helper for: MMM-Trello 0|mm | [22:35:42.064] [LOG] Sockets connected & modules started ... 0|mm | [22:35:42.072] [LOG] 0|mm | Ready to go! Please point your browser to: http://localhost:8080 0|mm | Starting chromium browser now, have patience, it takes a minute 0|mm | 0|mm | > magicmirror@2.10.0 start /home/pi/MagicMirror 0|mm | > ./run-start.sh 0|mm | 0|mm | [00:07:26.988] [LOG] Starting MagicMirror: v2.10.0 0|mm | [00:07:27.103] [LOG] Loading config ... 0|mm | [00:07:27.142] [LOG] Loading module helpers ... 0|mm | [00:07:27.161] [LOG] No helper found for module: alert. 0|mm | [00:07:27.174] [LOG] No helper found for module: clock. 0|mm | [00:07:31.751] [LOG] Initializing new module helper ... 0|mm | [00:07:31.760] [LOG] Module helper loaded: calendar 0|mm | [00:07:31.776] [LOG] No helper found for module: compliments. 0|mm | [00:07:31.792] [LOG] No helper found for module: currentweather. 0|mm | [00:07:31.801] [LOG] No helper found for module: weatherforecast. 0|mm | [00:07:32.012] [LOG] Initializing new module helper ... 0|mm | [00:07:32.022] [LOG] Module helper loaded: MMM-Spotify 0|mm | [00:07:35.649] [LOG] Initializing new module helper ... 0|mm | [00:07:35.658] [LOG] Module helper loaded: MMM-Trello 0|mm | [00:07:35.668] [LOG] All module helpers loaded. 0|mm | [00:07:35.675] [LOG] Starting server on port 8080 ... 0|mm | [00:07:35.808] [LOG] Server started ... 0|mm | [00:07:35.822] [LOG] Connecting socket for: calendar 0|mm | [00:07:35.832] [LOG] Starting node helper for: calendar 0|mm | [00:07:35.844] [LOG] Connecting socket for: MMM-Spotify 0|mm | [00:07:35.870] [LOG] [SPOTIFY_AUTH] Token is expired. It will be refreshed 0|mm | [00:07:35.881] [LOG] [SPOTIFY_AUTH] Token refreshing... 0|mm | [00:07:36.004] [LOG] Connecting socket for: MMM-Trello 0|mm | [00:07:36.018] [LOG] Starting node helper for: MMM-Trello 0|mm | [00:07:36.022] [LOG] Sockets connected & modules started ... 0|mm | [00:07:36.031] [LOG] 0|mm | Ready to go! Please point your browser to: http://localhost:8080 0|mm | Starting chromium browser now, have patience, it takes a minute 0|mm | 0|mm | > magicmirror@2.10.0 start /home/pi/MagicMirror 0|mm | > ./run-start.sh 0|mm | 0|mm | [00:22:57.441] [LOG] Starting MagicMirror: v2.10.0 0|mm | [00:22:57.555] [LOG] Loading config ... 0|mm | [00:22:57.593] [LOG] Loading module helpers ... 0|mm | [00:22:57.611] [LOG] No helper found for module: alert. 0|mm | [00:22:57.624] [LOG] No helper found for module: clock. 0|mm | [00:23:00.940] [LOG] Initializing new module helper ... 0|mm | [00:23:00.950] [LOG] Module helper loaded: calendar 0|mm | [00:23:00.961] [LOG] No helper found for module: compliments. 0|mm | [00:23:00.972] [LOG] No helper found for module: currentweather. 0|mm | [00:23:00.983] [LOG] No helper found for module: weatherforecast. 0|mm | [00:23:01.192] [LOG] Initializing new module helper ... 0|mm | [00:23:01.214] [LOG] Module helper loaded: MMM-Spotify 0|mm | [00:23:04.094] [LOG] Initializing new module helper ... 0|mm | [00:23:04.102] [LOG] Module helper loaded: MMM-Trello 0|mm | [00:23:04.113] [LOG] All module helpers loaded. 0|mm | [00:23:04.120] [LOG] Starting server on port 8080 ... 0|mm | [00:23:04.248] [LOG] Server started ... 0|mm | [00:23:04.259] [LOG] Connecting socket for: calendar 0|mm | [00:23:04.271] [LOG] Starting node helper for: calendar 0|mm | [00:23:04.283] [LOG] Connecting socket for: MMM-Spotify 0|mm | [00:23:04.305] [LOG] [SPOTIFY_AUTH] Token is fresh. 0|mm | [00:23:04.314] [LOG] Connecting socket for: MMM-Trello 0|mm | [00:23:04.324] [LOG] Starting node helper for: MMM-Trello 0|mm | [00:23:04.336] [LOG] Sockets connected & modules started ... 0|mm | [00:23:04.341] [LOG] 0|mm | Ready to go! Please point your browser to: http://localhost:8080 0|mm | Starting chromium browser now, have patience, it takes a minute 0|mm | 0|mm | > magicmirror@2.10.0 start /home/pi/MagicMirror 0|mm | > ./run-start.sh 0|mm | 0|mm | [09:33:18.789] [LOG] Starting MagicMirror: v2.10.0 0|mm | [09:33:18.865] [LOG] Loading config ... 0|mm | [09:33:18.904] [LOG] Loading module helpers ... 0|mm | [09:33:18.924] [LOG] No helper found for module: alert. 0|mm | [09:33:18.936] [LOG] No helper found for module: clock. 0|mm | [09:33:22.347] [LOG] Initializing new module helper ... 0|mm | [09:33:22.358] [LOG] Module helper loaded: calendar 0|mm | [09:33:22.371] [LOG] No helper found for module: compliments. 0|mm | [09:33:22.381] [LOG] No helper found for module: currentweather. 0|mm | [09:33:22.392] [LOG] No helper found for module: weatherforecast. 0|mm | [09:33:22.559] [LOG] Initializing new module helper ... 0|mm | [09:33:22.568] [LOG] Module helper loaded: MMM-Spotify 0|mm | [09:33:25.558] [LOG] Initializing new module helper ... 0|mm | [09:33:25.567] [LOG] Module helper loaded: MMM-Trello 0|mm | [09:33:25.578] [LOG] All module helpers loaded. 0|mm | [09:33:25.585] [LOG] Starting server on port 8080 ... 0|mm | [09:33:25.742] [LOG] Server started ... 0|mm | [09:33:25.755] [LOG] Connecting socket for: calendar 0|mm | [09:33:25.772] [LOG] Starting node helper for: calendar 0|mm | [09:33:25.780] [LOG] Connecting socket for: MMM-Spotify 0|mm | [09:33:25.813] [LOG] [SPOTIFY_AUTH] Token is expired. It will be refreshed 0|mm | [09:33:25.820] [LOG] [SPOTIFY_AUTH] Token refreshing... 0|mm | [09:33:26.055] [LOG] Connecting socket for: MMM-Trello 0|mm | [09:33:26.066] [LOG] Starting node helper for: MMM-Trello 0|mm | [09:33:26.077] [LOG] Sockets connected & modules started ... 0|mm | [09:33:26.085] [LOG] 0|mm | Ready to go! Please point your browser to: http://localhost:8080 0|mm | Starting chromium browser now, have patience, it takes a minute /home/pi/.pm2/logs/mm-error.log last 100 lines: 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | ./run-start.sh: line 67: 24163 Aborted (core dumped) chromium-browser -noerrdialogs -kiosk -start_maximized --disable-infobars --app=http://localhost:$port --ignore-certificate-errors-spki-list --ignore-ssl-errors --ignore-certificate-errors 2> /dev/null 0|mm | npm ERR! code ELIFECYCLE 0|mm | npm ERR! errno 134 0|mm | npm ERR! magicmirror@2.10.0 start: `./run-start.sh` 0|mm | npm ERR! Exit status 134 0|mm | npm ERR! 0|mm | npm ERR! Failed at the magicmirror@2.10.0 start script. 0|mm | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /home/pi/.npm/_logs/2020-01-10T19_57_51_885Z-debug.log 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | ./run-start.sh: line 67: 4392 Aborted (core dumped) chromium-browser -noerrdialogs -kiosk -start_maximized --disable-infobars --app=http://localhost:$port --ignore-certificate-errors-spki-list --ignore-ssl-errors --ignore-certificate-errors 2> /dev/null 0|mm | npm ERR! code ELIFECYCLE 0|mm | npm ERR! errno 134 0|mm | npm ERR! magicmirror@2.10.0 start: `./run-start.sh` 0|mm | npm ERR! Exit status 134 0|mm | npm ERR! 0|mm | npm ERR! Failed at the magicmirror@2.10.0 start script. 0|mm | npm ERR! This is probably not a problem with npm. There is likely additional logging output above. 0|mm | 0|mm | npm ERR! A complete log of this run can be found in: 0|mm | npm ERR! /home/pi/.npm/_logs/2020-01-10T20_56_57_189Z-debug.log 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27) 0|mm | events.js:174 0|mm | throw er; // Unhandled 'error' event 0|mm | ^ 0|mm | 0|mm | Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed 0|mm | at doWrite (_stream_writable.js:411:19) 0|mm | at writeOrBuffer (_stream_writable.js:399:5) 0|mm | at Socket.Writable.write (_stream_writable.js:299:11) 0|mm | at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) 0|mm | at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) 0|mm | at process.emit (events.js:198:13) 0|mm | at process._fatalException (internal/bootstrap/node.js:497:27):::
-
Some additional logs from /home/pi/.npm/_logs
0 info it worked if it ends with ok 1 verbose cli [ '/usr/local/bin/node', '/usr/local/bin/npm', 'start' ] 2 info using npm@6.13.4 3 info using node@v10.18.1 4 verbose run-script [ 'prestart', 'start', 'poststart' ] 5 info lifecycle magicmirror@2.10.0~prestart: magicmirror@2.10.0 6 info lifecycle magicmirror@2.10.0~start: magicmirror@2.10.0 7 verbose lifecycle magicmirror@2.10.0~start: unsafe-perm in lifecycle true 8 verbose lifecycle magicmirror@2.10.0~start: PATH: /usr/local/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games 9 verbose lifecycle magicmirror@2.10.0~start: CWD: /home/pi/MagicMirror 10 silly lifecycle magicmirror@2.10.0~start: Args: [ '-c', './run-start.sh' ] 11 silly lifecycle magicmirror@2.10.0~start: Returned: code: 134 signal: null 12 info lifecycle magicmirror@2.10.0~start: Failed to exec start script 13 verbose stack Error: magicmirror@2.10.0 start: `./run-start.sh` 13 verbose stack Exit status 134 13 verbose stack at EventEmitter.<anonymous> (/usr/local/lib/node_modules/npm/node_modules/npm-lifecycle/index.js:332:16) 13 verbose stack at EventEmitter.emit (events.js:198:13) 13 verbose stack at ChildProcess.<anonymous> (/usr/local/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14) 13 verbose stack at ChildProcess.emit (events.js:198:13) 13 verbose stack at maybeClose (internal/child_process.js:982:16) 13 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) 14 verbose pkgid magicmirror@2.10.0 15 verbose cwd /home/pi/MagicMirror 16 verbose Linux 4.19.75+ 17 verbose argv "/usr/local/bin/node" "/usr/local/bin/npm" "start" 18 verbose node v10.18.1 19 verbose npm v6.13.4 20 error code ELIFECYCLE 21 error errno 134 22 error magicmirror@2.10.0 start: `./run-start.sh` 22 error Exit status 134 23 error Failed at the magicmirror@2.10.0 start script. 23 error This is probably not a problem with npm. There is likely additional logging output above. 24 verbose exit [ 134, true ] -
@jorgnyg said in Error [ERR_STREAM_DESTROYED]:
Exit status 134
when this happens can u use a terminal window and do
ps -ef | grep -v color | grep chromiumI think the chromium browser is hung
and we keep trying to restart and it fails -
@jorgnyg this is a bug in the run-start.sh script
get a new one here
cd !/MagicMirror curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/run-start.sh >run-start.sh
