PIR Sensor won't wake up

karsten13

should be 23 (not 16)

alt text

Sceetch

Thx. now the table should be clear.
But the PIR doesn’t work.
After delay the screen switch off.
But i can breakdance in front of the sensor. It happend nothing…

but if i remove the cable from sensorpin 23 the sceen wakes up.

Sceetch

hi.
There are some news about my Sensor problem.

i tried to install these steps according this link

https://teilzeitrebell.de/blog/magicmirror-part-2-bewegungsmelder

i made two sh-scripts for screen on & off

monitor_off.sh
monitor_on.sh

then i created this phyton

pir_loop.py

!/usr/bin/env python

import sys
import time
import RPi.GPIO as io
import subprocess

io.setmode(io.BCM)
SHUTOFF_DELAY = 10  # seconds
PIR_PIN = 17        # Pin 11 on the board

def main():
    io.setup(PIR_PIN, io.IN)
    turned_off = False
    last_motion_time = time.time()

    while True:
        if io.input(PIR_PIN):
            last_motion_time = time.time()
            sys.stdout.flush()
            if turned_off:
                turned_off = False
                turn_on()
        else:
            if not turned_off and time.time() > (last_motion_time + SHUTOFF_DELAY):
                turned_off = True
                turn_off()
        time.sleep(.1)

def turn_on():
    subprocess.call("sh /home/pi/Pir-Sensor/monitor_on.sh", shell=True)

def turn_off():
    subprocess.call("sh /home/pi/Pir-Sensor/monitor_off.sh", shell=True)

if __name__ == '__main__':
    try:
        main()
    except KeyboardInterrupt:
        io.cleanup()

i can start this with

python pir_loop.py

and it seems that it works.

But in the code i defined a delay of 10 seconds. But after it, it happend nothing.
the weird thing is, that the screen turn off after exact 2 minutes. If i move in front of the sensor the screen turn on again.
But if i do nothing or cover the sensor with something the screen turn on after exact one minute.

does anybody has an idea, whats wrong there?

ebolisa

@sceetch I’ve, more or less, the same setup but the sh files stored in the MagicMirror folder.

dbg

@sceetch Which Raspberry Pi board are you using?

Sceetch

@dbg i’m using Raspberry Pi 3 Modell B Plus (B +)

I have no idea whats wrong.
I can change the delay time value randomly. There is no effect. After exact 2 minutes the screen turn off.

Could it be, there is something activated in the tvservice?

sdetweil

@sceetch off is because the module does this no motion was detected

dbg

@Sceetch

Hi

I installed the MMM-PIR-Sensor last week and I had a similar problem. I just couldn’t get the sensor to work with the module. I spent a lot of time and tried a few different things and nothing worked… in the end I updated the wiringPi GPIO access library (I’m using a Pi 4 Model B).

See here:

http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/

And now it’s working OK. I’m not saying this will fix your problem. It may be that an install I did overwrote the wiringPi files on my Pi or rolled them back in some way, but it worked for me.

Regards

dbg62

sdetweil

@sceetch also i think u need to make sure the sensor actually works

https://projects.raspberrypi.org/en/projects/parent-detector/3

Sceetch

@sdetweil thx for your comment.

I guess the sensor works.
If i start this script, the sensor switch after 2 minutes off.
If the sensor receives movements, the screen turn on, so i think it works. But i will test your script in the evening.

If there is no movement registered from the sensor the screen switch on after 1 minute.

I don’t understand why the countdown is 2 min? In the script the delay time is setted by 10 sec.

And why the screen turns on after another one minute. If there is no signal from the sensor??