Raspberry Pi Zero W for Magic Mirror

davidgagne

@sdetweil Okay! I’m doing this right now and will keep you posted. THANK YOU AGAIN.

davidgagne

`@sdetweil Sadly that didn’t seem to work at all.

pm2 flush gave me:

[PM2] Spawning PM2 daemon with pm2_home=/home/dvg/.pm2
[PM2] PM2 Successfully daemonized
[PM2] Flushing /home/dvg/.pm2/pm2.log
[PM2] Logs flushed

Then pm2 status gave me:

┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 0    │ online    │ 23.3%    │ 40.3mb   │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘

Then I did cd ~/MagicMirror/ and ran npm start which spit out this:

> magicmirror@2.27.0 start
> ./run-start.sh $1

[2024-05-29 23:08:58.949] [LOG] Starting MagicMirror: v2.27.0
[2024-05-29 23:08:59.437] [LOG] Loading config ...
[2024-05-29 23:08:59.497] [LOG] config template file not exists, no envsubst
[2024-05-29 23:09:07.135] [LOG] Loading module helpers ...
[2024-05-29 23:09:07.356] [LOG] No helper found for module: alert.
[2024-05-29 23:09:36.395] [LOG] Initializing new module helper ...
[2024-05-29 23:09:36.558] [LOG] Module helper loaded: updatenotification
[2024-05-29 23:09:36.688] [LOG] No helper found for module: clock.
[2024-05-29 23:10:00.038] [LOG] Initializing new module helper ...
[2024-05-29 23:10:00.109] [LOG] Module helper loaded: calendar
[2024-05-29 23:10:00.684] [ERROR] Whoops! There was an uncaught exception... 
[2024-05-29 23:10:01.570] [ERROR] Error: Cannot find module 'request'
Require stack:
- /home/dvg/MagicMirror/modules/MMM-JEOPARDY/node_helper.js
- /home/dvg/MagicMirror/js/app.js
- /home/dvg/MagicMirror/serveronly/index.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1048:15)
    at Module._resolveFilename (/home/dvg/MagicMirror/node_modules/module-alias/index.js:49:29)
    at Module._load (node:internal/modules/cjs/loader:901:27)
    at Module.require (node:internal/modules/cjs/loader:1115:19)
    at require (node:internal/modules/helpers:130:18)
    at Object.<anonymous> (/home/dvg/MagicMirror/modules/MMM-JEOPARDY/node_helper.js:8:17)
    at Module._compile (node:internal/modules/cjs/loader:1241:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1295:10)
    at Module.load (node:internal/modules/cjs/loader:1091:32)
    at Module._load (node:internal/modules/cjs/loader:938:12)
    at Module.require (node:internal/modules/cjs/loader:1115:19)
    at require (node:internal/modules/helpers:130:18)
    at loadModule (/home/dvg/MagicMirror/js/app.js:183:19)
    at loadModules (/home/dvg/MagicMirror/js/app.js:213:10)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
    at async App.start (/home/dvg/MagicMirror/js/app.js:261:3) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [
    '/home/dvg/MagicMirror/modules/MMM-JEOPARDY/node_helper.js',
    '/home/dvg/MagicMirror/js/app.js',
    '/home/dvg/MagicMirror/serveronly/index.js'
  ]
} 
[2024-05-29 23:10:01.664] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 
[2024-05-29 23:10:01.745] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MagicMirrorOrg/MagicMirror/issues 
[2024-05-29 23:12:53.308] [INFO] System information:
### SYSTEM: manufacturer: Raspberry Pi Foundation; model: Raspberry Pi Zero W Rev 1.1; raspberry: [object Object]; virtual: false
### OS: platform: linux; distro: Raspbian GNU/Linux; release: 11; arch: arm; kernel: 6.1.21+
### VERSIONS: electron: undefined; used node: 20.8.0; installed node: 20.8.0; npm: 10.1.0; pm2: 5.4.0
### OTHER: timeZone: America/New_York; ELECTRON_ENABLE_GPU: undefined
Starting chromium browser now, have patience, it takes a minute
Chromium_browser not installed

This all seemed pointless, but I ran pm2 restart 0 anyway and got this:

Use --update-env to update environment variables
[PM2] Applying action restartProcessId on app [0](ids: [ '0' ])
[PM2] [MagicMirror](0) ✓
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 47   │ online    │ 0%       │ 23.5mb   │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘

At this point I’m going to give up and go back to square one and flash the drive again and start over. Ugh.

sdetweil

@davidgagne said in Raspberry Pi Zero W for Magic Mirror:

024-05-29 23:10:01.570] [ERROR] Error: Cannot find module ‘request’
Require stack:

/home/dvg/MagicMirror/modules/MMM-JEOPARDY/node_helper.js

no… just fix the MMM-Jeopardy module as I suggested yesterday

two steps
you only did 1

… the more concerning part is that pm2 didn’t get setup as a service and start on boot… i haven’t looked at the log yet

sdetweil

@davidgagne the install log looks good…

don’t know what is going on… will have to think on it while I sleep…

time to rest… til tomorrow

davidgagne

@sdetweil I understand what you’re saying about fixing the Jeopardy module, but I really think that’s secondary to not getting MM to run in the first place (and it not starting as a service on boot). Once I get MM running reliably in the first place I will play around with modules. :-)

davidgagne

How to Get MagicMirror to Run on a Raspberry Pi Zero W Rev 1.1

Late-May 2024

Huge thanks to @sdetweil for all his help!

Flash card with Legacy 32-bit.

Connect via ssh to run script:

bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

Answer yes to disable screen saver and use pm2 questions.

Remove chromium with:

sudo apt-get remove chromium-browser
sudo apt autoremove

Add Firefox with:

sudo apt-get update
sudo apt-get install firefox-esr

Enable VNC using GUI (Interface Options):
sudo raspi-config
Connect via TigerVNC (Apple app)
Edit installers/mm.sh via VNC using Pi's baked-in text editor by adding:
```
cd ~/MagicMirror
export external_browser=firefox
DISPLAY=:0 npm start
```

Execute fix'em-up script:

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/fixuppm2.sh)"

cd ~/MagicMirror/
pm2 start MagicMirror

sudo reboot

Note: On my Pi Zero W it takes a solid ten minutes from reboot to actually seeing MM output via HDMI.

sdetweil

@davidgagne thanks.

5 and 6 are optional
as 7 can be done with nano over ssh

   scroll down with keyboard arrow keys
   hit enter to add a line
   type the export line
   ctrl-x to exit nano, yes to save contents

8 and 9 over ssh
9 pm2 can be run from any folder location

davidgagne

@sdetweil Is there any reason why this same procedure would not work on a 3B+? I’ve tried with multiple different versions of the OS but it always seems to get stuck on “Updating packages …” and – as far as I can tell – there’s nothing meaningful in install.log. Is this install script unique to the Zero W?

sdetweil

@davidgagne no. the script works of any Debian based os. pi0 is SLOOOOOW…
but pi 3b+ should be ok. there should be a moving <-> while it’s updating… (haven’t figured out how to make that stand out more)

the script is doing apt get update, apt upgrade . this could take a while based on how much change since distro was released. over wifi, nothing I can do to speed it up.

I’ve tested on all the pi models. except the pi 1.
on odroid, Jetson nano, a chrome box and book running linux and a bunch of x86 distros., and macos Intel and arm.
I also tested on my arm chromebook, with the extra Ubuntu installed. install worked and server mode worked. no ui

if there is a problem, I’ll fix it. I’ll setup my 3b later.

davidgagne

@sdetweil Right. That’s my confusion. I have been able to run the script a dozen (or more) times on the Zero W, but it always fails on the 3B+, which I had assumed would be faster / better than the Zero W.