MM current version on Raspberry Pi 5 cannot turn off monitor

jbat66

@sdetweil said in MM current version on Raspberry Pi 5 cannot turn off monitor:

@jbat66 trying to find devices without host connections… get more/all local

While the Yo-Link is great it is cloud and you can’t do local yet. They have been talking about it in their forums, however.

jbat66

@sdetweil
I looked it up and you can get power readings via the API.
http://doc.yosmart.com/docs/yolinkapi/Outlet

sdetweil

@jbat66 yeh gotta get a token for each I think

karsten13

@sdetweil

and interesting idea being described for integrating older devices, like washing machine, is to monitor the power consumption with a smart plug… (I don’t know which do that in the US)

thats exactly what I plan for my washing machine

I wonder if the pi also has a lower consumption that can be measured and used as a trigger to turn off the smart switch when the power drops after pi shuts down…

I ordered a smart plug from TuYa for this and tested this now with a raspberry pi 4.

When the pi is running:

After shutdown of the pi but red light of pi still on:

sdetweil

@karsten13 awesome. I hope my plug will be here today

jbat66

@sdetweil So I ened up using a Yo-Link Plug, and it’s API. I have my monitor plugged into the Yo-Link Plug. I wrote a script that sets a delay time off to 1 minute for the monitor, and then 10 seconds later does a sudo power off command. So the pi shuts down gracefuly and then the monitor. The pi is powered from the usb connector on the monitor.

JohnGalt

@jbat66 - thanks for the offer. If you do wind up sharing your work, I will take a look and see if it works for me.

I don’t run any remote control module, and don’t find the “MMM-remote” you reference when I search. I do, however, find at least two (2) different modules called “MMM-Remote-Control” by two different authors. Do you mean one of those?

My progress so far is that I can get the monitor to turn off using the following script (called by a cron job), but the monitor then turns back on after ~10-15 seconds:

#!/bin/bash

# Script to turn off monitor display when called by crontab
export WAYLAND_DISPLAY=wayland-1
export XDG_RUNTIME_DIR=/run/user/1000
/usr/bin/wlr-randr --output HDMI-A-1 --off

1a2a3a

@JohnGalt Can you add vc4.force_hotplug=1 to cmdline.txt (on existing line) and check if behaviour changes? Add a space at the end of the line, save and reboot.

Assuming you are using the first hdmi port closer to the usb c. If using the 2nd port then change the hot plug number to 2

jbat66

@JohnGalt said in MM current version on Raspberry Pi 5 cannot turn off monitor:

@jbat66 - thanks for the offer. If you do wind up sharing your work, I will take a look and see if it works for me.

I don’t run any remote control module, and don’t find the “MMM-remote” you reference when I search. I do, however, find at least two (2) different modules called “MMM-Remote-Control” by two different authors. Do you mean one of those?

This one: https://github.com/Jopyth/MMM-Remote-Control

Sorry I should have been more clear.

JohnGalt

@1a2a3a said in MM current version on Raspberry Pi 5 cannot turn off monitor:

vc4.force_hotplug

That does appear to work! So far I have tried it on two different Pi 4 instances, and each responded to a script called in crontab to turn off the monitor display, and then a script to turn it back on, as expected.

Thanks.