Module Region question

sdetweil

@greedyvegan what is the hard time?

the positions are the top left edge of each, and no clip or wrap on the right or bottom

bottom of screen has overflow hidden

greedyvegan

@sdetweil said in Module Region question:

@greedyvegan what is the hard time?

well overall, I’m not as savvy as most; but I’m reading and learning.

I try to stray away from modifying the module’s css & js,
but I edit the module’s css then copy it to the custom css and revert the file. - the default modules, I edited the js files to stop the fading.
some modules work and when I add a new one, it stops
(MMM-GooglePhotos & MMM-text-clock) worked, but when I added MMM-NewsAPI, they both stopped and the NewsAPI never showed up.
I can’t understand the one call api thing for the weather

what also doesn’t work is ipWhitelist [], (address: “0.0.0.0”)
I read a post where you explained you never used VNC
i’d love to configure my mirror from my computer and not through the pi
the webpage always says “safari can’t open the page”

I’d love to access the pi hard drive from my computer, I think that would make things easy, ssh@raspberry pi works; so I have access via terminal.

control shift & I via VNC truncates the screen and makes it difficult to view, at that point the pi slows down (I am using a usb drive for the pi os, but I don’t notice any speed difference)
I THINK the more modules or text in the config & css file I add, the slower it gets.

sorry to dump

I installed bullseye on my pi 4 because bookworm wouldn’t allow me to rotate the screen on VNC

greedyvegan

forgot to add, previously when I would modify the config file, any time I would make a change and save the file, MagicMirror would quit and reopen, that doesn’t happen anymore. I have to manually refresh the mirror

I have a question:

{module: "monopoly",
position: "lower_third",
config: {
url: "https://monopoly.com"
}
},

the last part of the code (url: “monopoly.com”)
doesn’t require a comma after it as long as the squiggly bracket closes the code?

sdetweil

@greedyvegan the trailing comma says more content follows.

if it’s not there, then the next thing must start something new,
if the thing isn’t finished, then lack of a trailing comma will produce an error ( Unexpected token)

in your example, after the url: “…”

there are no more properties in config section, so it is done, no commas required

sdetweil

@greedyvegan address/ipwhitelist are mm config properties, only

address:“0.0.0.0”, // means listen on all adapters, wifi and ethernet if both enabled,
WITHOUT having to specify the ACTUAL ip address

port: 8080 // default

so you would use your PC browser to connect to the ip address/name of the machine running mm:port number

http://ip_address_or_name:port

ipwhitelist:[] // provides a way to allow ONLY specific addresses, ON YOUR NETWORK, to connect to mm.
if you didn’t want your kids to connect to it for some reason.

to access disk and have ssh,use bitwise or winscp clients from your PC. will give use ssh window and file manager type access to files on pi

sdetweil

@greedyvegan for the developers console on mm page see here ( can do from any system w mm access)

https://forum.magicmirror.builders/post/90135

sdetweil

@greedyvegan on the restart on change, pm2 seems flaky there.
but I have only configured to watch config.js

to refresh w css just refresh the MM page.

ctrl-r on the MM content, f5 on the dev window content

you can do all the developers window from any pc that can get the MM screen

greedyvegan

@sdetweil said in Module Region question:

@greedyvegan the trailing comma says more content follows.

if it’s not there, then the next thing must start something new,
if the thing isn’t finished, then lack of a trailing comma will produce an error ( Unexpected token)

in your example, after the url: “…”

there are no more properties in config section, so it is done, no commas required

understood, thank you

sdetweil

@greedyvegan you can also try my MMM-Config module if you want to avoid the editing troubles of config.js

https://github.com/sdetweil/MMM-Config

greedyvegan

@sdetweil said

address:“0.0.0.0”, // means listen on all adapters, wifi and ethernet if both enabled, WITHOUT having to specify the ACTUAL ip address
port: 8080 // default so you would use your PC browser to connect to the ip address/name of the machine running mm:port number
http://ip_address_or_name:port ipwhitelist:[] // provides a way to allow ONLY specific addresses, ON YOUR NETWORK, to connect to mm.

I’ve tried ipWhitelist “[]” and “[my ipaddress]” and nothing,
but I’m going to try again

to access disk and have ssh,use bitwise or winscp clients from your PC. will give use ssh window and file manager type access to files on pi

I’m going to give this a shot

on the restart on change, pm2 seems flaky there.
but I have only configured to watch config.js
to refresh w css just refresh the MM page.
ctrl-r on the MM content, f5 on the dev window content
you can do all the developers window from any pc that can get the MM screen

I’ve been refreshing or closing the MM window

you can also try my MMM-Config module if you want yo avoid the editing troubles of config.js https://github.com/sdetweil/MMM-Config

I’m going to try that now
thanks a lot.