Mirror not starting after update

sdetweil

@xIExodusIx what OS are you on?

lsb_release -a
and
uname -a
will show

did you use my upgrade script? it will upgrade node too

xIExodusIx

@sdetweil

Raspberry Pi 4
OS = bookworm 64bit

sdetweil

@xIExodusIx did you use my upgrade script?

sdetweil

@chrisfr1976 can you show me the output of thew npm run install-mm

do it this way (from the MM folder of course)

cd ~/MagicMirror
npm run install-mm >somefile.txt 2>&1

then when it finishes all the output is in somefile.txt

xIExodusIx

@sdetweil
lsb_release -a shows:
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 12 (bookworm)
Release: 12
Codename: bookworm

uname -a shows:
Linux MirrorPi 6.6.51+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt2 (2024-10-01) aarch64 GNU/Linux

yes I used your upgrade-script with apply and also with force.

pm2 start MagicMirror will start the MM but it won’t show up!

npm start results in following errors:
[41163:1002/155017.678545:ERROR:ozone_platform_x11.cc(245)] Missing X server or $DISPLAY
[41163:1002/155017.688550:ERROR:env.cc(258)] The platform failed to initialize. Exiting.
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV

sdetweil

@xIExodusIx before this morning, my upgrade script had a bug

do

cd ~/MagicMirror
ls installers

that should fail (not found)
then do

mkdir installers
curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/mm.sh >installers/mm.sh
chmod +x installers/mm.sh

sdetweil

@xIExodusIx also, if you do

cd ~/MagicMirror
npm start

does MM come up?

xIExodusIx

@sdetweil

magicmirror@2.29.0 install-mm
npm install --no-audit --no-fund --no-update-notifier --only=prod --omit=dev

magicmirror@2.29.0 postinstall
npm run install-vendor && npm run install-fonts && echo "MagicMirror² installation finished successfully!
"

magicmirror@2.29.0 install-vendor
echo "Installing vendor files …
" && cd vendor && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing vendor files …

up to date in 2s

magicmirror@2.29.0 install-fonts
echo "Installing fonts …
" && cd fonts && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing fonts …

up to date in 1s
MagicMirror² installation finished successfully!

magicmirror@2.29.0 prepare
[ -f node_modules/.bin/husky ] && husky || echo no husky installed.

no husky installed.

up to date in 14s

after that, nodejs is still the same: 18.19.0

xIExodusIx

@sdetweil
the installers folder is still there.
should I delete it?
or should run the script without delete the installers folder?

xIExodusIx

@sdetweil
if I do npm start

I get this error at the end:
.
.
.
[2024-10-02 16:13:22.616] [LOG] All module helpers loaded.
[2024-10-02 16:13:22.627] [LOG] Starting server on port 8181 …
[63161:1002/161323.449087:ERROR:ozone_platform_x11.cc(245)] Missing X server or $DISPLAY
[63161:1002/161323.449298:ERROR:env.cc(258)] The platform failed to initialize. Exiting.
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV