Read the statement by Michael Teeuw here.
Touch Screen Monitor With Two Way Mirror Film
-
@KirAsh4 Good advice! I plan to take the screen out of the enclosure anyways so that I can build a custom enclosure for it. I’m not sure whether I will do this before I apply the film or not yet. I’m thinking it will be much easier that way.
-
Remove the frame, look at the edges of the glass. That’s the important part not to get wet. You can likely put a layer of silicone all around on the edges, let it cure over night, then put the film on the next day. It’s not like you have to soak the thing, so changes are you can do it with minimal water exposure and it would be fine. Just keep an eye where the water is going, keep a dry rag handy to wipe it off right away. Let it sit out to air dry for a day or two before putting it back together and connected to power again.
-
@KirAsh4 Sounds like a plan! We’ll see how this turns out :)
-
What about Acer T272HUL TouchScreen ?
Simply a beautiful monitor. It was very inspiring to work with it. It is very close to the imac level of quality. If you don’t believe me, read some reviews such as cnet, BestAdvisor or pcadvisor, a lot of them recommend it as the best pick on the market. The touchscreen works great, although I did not use the touch as much as I thought. I had 2 laptops hooked up, one HDMI, one via Displayport. I liked the navigation a lot. It is buttons, but with a simple software navigation which I found very comfortable to interact with, no headache.
One cool thing, I don’t know what they did, but the monitor would find the active port, if I disconnected one, it found the other. I really appreciate that functionality. The expense is challenging, but you are purchasing a beautiful object.The two things that are cons for me is the weight, it was too heavy for my egotron arm. It is designed to be used with the kickstand and it rests on the table / desk like it is shown in the pic. Ok, once I adjusted.
Oh, and I really like the charging USB 3.0 on the side. Overall, great monitor.
-
Hello EoF,
I am trying to build a two way mirror that’ll work with touch screen. Were you able to find any non-metallic mirror films? I have been looking but can’t find any?
Would appreciate any guidance. Thanks :)
