With all my fiddling, my MagicMirror is now broken, it wont start.
Over the next few days I will do a clean install, and then take it from there.
Thanks for your help.
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
V
Latest posts made by vinnie1
-
RE: MMM-MQTT = Blank Screenposted in Troubleshooting
-
RE: MMM-MQTT = Blank Screenposted in Troubleshooting
yes
/MagicMirror/installers/mm.sh
I also have a mm.sh in my home directory (not sure why), I put it in there as well.
-
RE: MMM-MQTT = Blank Screenposted in Troubleshooting
Still get the errors
/home/pi2/.pm2/logs/mm-error.log last 100 lines: 0|mm | [2768:0211/074735.631766:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [2811:0211/074736.362425:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [2782:0211/074736.436519:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. -
RE: MMM-MQTT = Blank Screenposted in Troubleshooting
ok, here is the output.
Just for information this is done over ssh.
pi2@MagicMirror:~/MagicMirror/config $ pm2 logs --lines=100 [TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option) /home/pi2/.pm2/pm2.log last 100 lines: PM2 | 2023-02-09T10:48:02: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2023-02-09T10:48:02: PM2 log: App [mm:0] online PM2 | 2023-02-09T10:50:12: PM2 log: Stopping app:mm id:0 PM2 | 2023-02-09T10:50:13: PM2 log: pid=1664 msg=failed to kill - retrying in 100ms PM2 | 2023-02-09T10:50:13: PM2 log: pid=1664 msg=failed to kill - retrying in 100ms PM2 | 2023-02-09T10:50:13: PM2 log: pid=1664 msg=failed to kill - retrying in 100ms PM2 | 2023-02-09T10:50:13: PM2 log: pid=1664 msg=failed to kill - retrying in 100ms PM2 | 2023-02-09T10:50:13: PM2 log: App [mm:0] exited with code [0] via signal [SIGINT] PM2 | 2023-02-09T10:50:13: PM2 log: pid=1664 msg=process killed /home/pi2/.pm2/logs/mm-out.log last 100 lines: 0|mm | 0|mm | > magicmirror@2.22.0 start 0|mm | > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js 0|mm | 0|mm | [09.02.2023 10:48.09.593] [LOG] Starting MagicMirror: v2.22.0 0|mm | [09.02.2023 10:48.09.609] [LOG] Loading config ... 0|mm | [09.02.2023 10:48.09.626] [LOG] Loading module helpers ... 0|mm | [09.02.2023 10:48.09.632] [LOG] No helper found for module: alert. 0|mm | [09.02.2023 10:48.09.669] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.09.672] [LOG] Module helper loaded: updatenotification 0|mm | [09.02.2023 10:48.09.675] [LOG] No helper found for module: clock. 0|mm | [09.02.2023 10:48.10.394] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.10.399] [LOG] Module helper loaded: calendar 0|mm | [09.02.2023 10:48.10.411] [LOG] No helper found for module: weather. 0|mm | [09.02.2023 10:48.10.420] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.10.421] [LOG] Module helper loaded: MMM-ImageSlideshow 0|mm | [09.02.2023 10:48.10.895] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.10.896] [LOG] Module helper loaded: MMM-MQTT 0|mm | [09.02.2023 10:48.12.346] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.12.348] [LOG] Module helper loaded: MMM-Jast 0|mm | [09.02.2023 10:48.12.453] [LOG] Initializing new module helper ... 0|mm | [09.02.2023 10:48.12.455] [LOG] Module helper loaded: newsfeed 0|mm | [09.02.2023 10:48.12.456] [LOG] All module helpers loaded. 0|mm | [09.02.2023 10:48.12.758] [LOG] Starting server on port 8080 ... 0|mm | [09.02.2023 10:48.13.766] [LOG] Server started ... 0|mm | [09.02.2023 10:48.13.768] [LOG] Connecting socket for: updatenotification 0|mm | [09.02.2023 10:48.13.770] [LOG] Starting module helper: updatenotification 0|mm | [09.02.2023 10:48.13.772] [LOG] Connecting socket for: calendar 0|mm | [09.02.2023 10:48.13.773] [LOG] Starting node helper for: calendar 0|mm | [09.02.2023 10:48.13.779] [LOG] Connecting socket for: MMM-ImageSlideshow 0|mm | [09.02.2023 10:48.13.781] [LOG] Connecting socket for: MMM-MQTT 0|mm | [09.02.2023 10:48.13.783] [LOG] Connecting socket for: MMM-Jast 0|mm | [09.02.2023 10:48.13.785] [LOG] MMM-Jast helper method started... 0|mm | [09.02.2023 10:48.13.787] [LOG] Connecting socket for: newsfeed 0|mm | [09.02.2023 10:48.13.789] [LOG] Starting node helper for: newsfeed 0|mm | [09.02.2023 10:48.13.791] [LOG] Sockets connected & modules started ... 0|mm | [09.02.2023 10:48.14.076] [LOG] Launching application. 0|mm | [09.02.2023 10:48.22.293] [LOG] Create new calendarfetcher for url: http://www.calendarlabs.com/ical-calendar/ics/35/Australia_Holidays.ics - Interval: 300000 0|mm | [09.02.2023 10:48.24.266] [INFO] Calendar-Fetcher: Broadcasting 18 events. /home/pi2/.pm2/logs/mm-error.log last 100 lines: 0|mm | [1719:0209/104818.604536:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [1761:0209/104819.018207:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [1732:0209/104819.110729:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. 0|mm | /home/pi2/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT -
RE: MMM-MQTT = Blank Screenposted in Troubleshooting
Thanks for taking the time to have a look.
This is everything from the command pm2 logs
pi2@MagicMirror:~/MagicMirror/config $ pm2 logs [TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option) /home/pi2/.pm2/pm2.log last 15 lines: PM2 | 2023-02-06T07:38:59: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:38:59: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: pid=693 msg=failed to kill - retrying in 100ms PM2 | 2023-02-06T07:39:00: PM2 log: Process with pid 693 still alive after 1600ms, sending it SIGKILL now... PM2 | 2023-02-06T07:39:03: PM2 log: App [mm:0] exited with code [0] via signal [SIGKILL] PM2 | 2023-02-06T07:39:03: PM2 log: pid=693 msg=process killed PM2 | 2023-02-06T07:40:15: PM2 log: App [mm:0] starting in -fork mode- PM2 | 2023-02-06T07:40:15: PM2 log: App [mm:0] online /home/pi2/.pm2/logs/mm-error.log last 15 lines: 0|mm | [1318:0204/093618.954184:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [1281:0204/093619.055108:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. 0|mm | [1318:0205/050009.577343:ERROR:connection.cc(46)] X connection error received. 0|mm | [1318:0205/050009.577492:ERROR:connection.cc(46)] X connection error received. 0|mm | [1268:0205/050132.845932:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [1321:0205/050133.251938:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [1277:0205/050133.344683:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. 0|mm | [1321:0206/050014.605843:ERROR:connection.cc(46)] X connection error received. 0|mm | [1321:0206/050014.605850:ERROR:connection.cc(46)] X connection error received. 0|mm | [1270:0206/050128.218984:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [1323:0206/050128.620777:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [1277:0206/050128.732856:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. 0|mm | [2762:0206/074034.819745:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [2805:0206/074035.474647:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported. 0|mm | [2776:0206/074035.538693:ERROR:command_buffer_proxy_impl.cc(126)] ContextResult::kTransientFailure: Failed to send GpuControl.CreateCommandBuffer. /home/pi2/.pm2/logs/mm-out.log last 15 lines: 0|mm | [06.02.2023 07:40.28.058] [LOG] Server started ... 0|mm | [06.02.2023 07:40.28.063] [LOG] Connecting socket for: updatenotification 0|mm | [06.02.2023 07:40.28.065] [LOG] Starting module helper: updatenotification 0|mm | [06.02.2023 07:40.28.067] [LOG] Connecting socket for: calendar 0|mm | [06.02.2023 07:40.28.068] [LOG] Starting node helper for: calendar 0|mm | [06.02.2023 07:40.28.070] [LOG] Connecting socket for: MMM-ImageSlideshow 0|mm | [06.02.2023 07:40.28.072] [LOG] Connecting socket for: MMM-MQTT 0|mm | [06.02.2023 07:40.28.074] [LOG] Connecting socket for: MMM-Jast 0|mm | [06.02.2023 07:40.28.075] [LOG] MMM-Jast helper method started... 0|mm | [06.02.2023 07:40.28.077] [LOG] Connecting socket for: newsfeed 0|mm | [06.02.2023 07:40.28.078] [LOG] Starting node helper for: newsfeed 0|mm | [06.02.2023 07:40.28.080] [LOG] Sockets connected & modules started ... 0|mm | [06.02.2023 07:40.28.262] [LOG] Launching application. 0|mm | [06.02.2023 07:40.39.239] [LOG] Create new calendarfetcher for url: http://www.calendarlabs.com/ical-calendar/ics/35/Australia_Holidays.ics - Interval: 300000 0|mm | [06.02.2023 07:40.41.159] [INFO] Calendar-Fetcher: Broadcasting 18 events.And for more info here is the relevant section of my config.js
{ module: 'MMM-MQTT', position: 'bottom_left', header: 'MQTT', config: { logging: false, useWildcards: false, mqttServers: [ { address: 'localhost', port: '1883', subscriptions: [ { topic: 'sensor/data', label: 'Temp', broadcast: false, }, { topic: 'MM/Accu/Lader2', label: 'Acculader 2', broadcast: false, }, { topic: 'Energie/power_delivered', label: 'Verbruik', suffix: 'kWh', broadcast: false, } ] } ], } },With or without the MQTT in config.js the logs look the same.
Maybe the error is in the config.js somewhere? -
MMM-MQTT = Blank Screenposted in Troubleshooting
I hope someone can help, or give me pointers on what to do next, other than to give up.
What I am trying to do is use mqtt to send data to my MagicMirror from another computer to be displayed.
I am using the ottopaulsen/MMM-MQTT module.
The MagicMirror computer is also running Mosquitto broker which I have tested and is working fine., data being recieved and read correctly.
I have what I guess are errors from the following command.
from pm2 logs
/home/pi2/.pm2/logs/mm-error.log last 15 lines: 0|mm | '/home/pi2/MagicMirror/modules/MMM-MQTT/node_modules/mqtt/lib/topic-alias-send.js', 0|mm | '/home/pi2/MagicMirror/modules/MMM-MQTT/node_modules/mqtt/lib/client.js', 0|mm | '/home/pi2/MagicMirror/modules/MMM-MQTT/node_modules/mqtt/mqtt.js', 0|mm | '/home/pi2/MagicMirror/modules/MMM-MQTT/mqtt_helper.js', 0|mm | '/home/pi2/MagicMirror/modules/MMM-MQTT/node_helper.js', 0|mm | '/home/pi2/MagicMirror/js/app.js', 0|mm | '/home/pi2/MagicMirror/js/electron.js', 0|mm | '/home/pi2/MagicMirror/node_modules/electron/dist/resources/default_app.asar/main.js', 0|mm | undefined 0|mm | ] 0|mm | } 0|mm | [02.02.2023 13:35.38.989] [ERROR] MagicMirror² will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|mm | [02.02.2023 13:35.38.990] [ERROR] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues 0|mm | [2288:0202/133544.021643:ERROR:viz_main_impl.cc(186)] Exiting GPU process due to errors during initialization 0|mm | [2319:0202/133544.414082:ERROR:gpu_memory_buffer_support_x11.cc(44)] dri3 extension not supported.I have no idea how to proceed from here.
When I start MagicMirror, I just end up with a completely blank screen, no modules, nothing working.
I have run
npm run config:checkThat seems ok.
Please Help!