Thanks for the explanation and the help!
Read the statement by Michael Teeuw here.
Latest posts made by dubbedMonster
-
RE: Apple calendar & server only mode
-
RE: Apple calendar & server only mode
I don’t think I fully understand, but I’m following you. I made the change to localhost and everything still works.
Does the same thing apply to the “address” in the config.js?
-
RE: Apple calendar & server only mode
Thanks for the feedback. I was able to get a sample event to show in the calendar.
When looking at the the config.js, I was thinking that meant of the entire filesystem and not MM install directory (didn’t read that line close enough)
I made the following changes
On hose machine
config.jsurl: "http:/0.0.0.0:8080/modules/calendars/1FC43665-307D-4E49-A0C5-914CA52E07EB.ics",
On Docker
~/.vdirsyncer/configpath = "/opt/magic_mirror/modules/calendars/%s.ics"
Ran the following code
vdirsyncer sync --force-delete iCloud_to_MagicMirror/Stuff vdirsyncer sync
Everything looks good and works! Thank you again for the help
-
Apple calendar & server only mode
Hi all,
I’m looking for a little guidance here. I’m having issues with displaying iCloud calendar data. When MM loads, the iCloud Calendar module states the following:
Error in the calendar module. Check logs for more details
I’ve tried inspecting the console for any obvious errors and I started investigating using breakpoints. It seems like the MM webpage cannot access the .ics file.
I started with the instructions listed here. I was able to sync with iCloud using vdirsyncer and the .ics file has valid data inside that matches my phone.
On the Docker container (mm)
Calendar directory
/home/node/MagicMirror/modules/calendar
Vdirsyncer config location
/home/node/.vdirsyncer/config
Vdirsyncer config file
# vdirsyncer configuration for MagicMirror. # # Move it to ~/.vdirsyncer/config or ~/.config/vdirsyncer/config and edit it. # Run `vdirsyncer --help` for CLI usage. # # Optional parameters are commented out. # This file doesn't document all available parameters, see # http://vdirsyncer.pimutils.org/ for the rest of them. [general] # A folder where vdirsyncer can store some metadata about each pair. status_path = "~/.vdirsyncer/status/" # CALDAV Sync [pair iCloud_to_MagicMirror] a = "Mirror" b = "iCloud" collections = ["Stuff"] # Calendars also have a color property metadata = ["displayname", "color"] [storage Mirror] # We need a single .ics file for use with the mirror (Attention! This is really slow on big amounts of events.) type = "singlefile" # We'll put the calendar file to a readable location for the calendar module path = "/home/node/MagicMirror/modules/calendars/%s.ics" [storage iCloud] type = "caldav" url = "https://caldav.icloud.com/" # Authentication credentials username = "email" password = "password" # We only want to sync in the direction TO the mirror, so we make iCloud readonly read_only = true # We only want to sync events item_types = ["VEVENT"] # We need to keep the number of events low, so we'll just sync the next month # Adjust this to your needs start_date = "datetime.now() - timedelta(days=1)" end_date = "datetime.now() + timedelta(days=30)"
I had to make a few tweaks for Alpine and they’re listed below.
~/.local/bin/vdirsyncer
is located here
/etc/init.d
I installed OpenRC on Alpine and used OpenRC-Run generator to convert systemd service to openrc
vidrsyncer.timer is located here (I’m not 100% certain about this guy)
/etc/periodic/15min
vidrsyncer.timer file
[Unit] Description=Synchronize vdirs [Timer] OnBootSec=5m OnUnitActiveSec=15m AccuracySec=5m [Install] WantedBy=timers.target
vdirsyncer.service is located here
/etc/init.d/
vdirsyncer file
vdirsyncer #!/sbin/openrc-run name=$RC_SVCNAME description="Synchronize calendars and contacts" supervisor="supervise-daemon" command="/usr/bin/vdirsyncer" command_args="sync"
On the host machine
docker-yaml.ymlservices: magicmirror: container_name: mm image: magicmirror/test:version1 ports: - "8080:8080" volumes: - ../mounts/config:/opt/magic_mirror/config - ../mounts/modules:/opt/magic_mirror/modules - ../mounts/css:/opt/magic_mirror/css restart: unless-stopped command: - npm - run - server
config.js location
/home/user/mounts/config/config.js
config.js
/* Config Sample * * For more information on how you can configure this file * see https://docs.magicmirror.builders/configuration/introduction.html * and https://docs.magicmirror.builders/modules/configuration.html * * You can use environment variables using a `config.js.template` file instead of `config.js` * which will be converted to `config.js` while starting. For more information * see https://docs.magicmirror.builders/configuration/introduction.html#enviromnent-variables */ lat_var = 28 long_var = 80 let config = { address: "0.0.0.0", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, basePath: "/", // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: ["127.0.0.1", "::ffff:192.168.1.1/120", "::1", "192.168.1.1/24"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], useHttps: false, // Support HTTPS or not, default "false" will use HTTP httpsPrivateKey: "", // HTTPS private key path, only require when useHttps is true httpsCertificate: "", // HTTPS Certificate path, only require when useHttps is true language: "en", locale: "en-US", logLevel: ["INFO", "LOG", "WARN", "ERROR", "DEBUG"], // Add "DEBUG" for even more logging timeFormat: 24, units: "imperial", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: 'calendar', position: 'top_left', // This can be any of the regions. Best results in left or right regions. config: { maximumNumberOfDays: 10, maximumEntries: 7, calendars: [{ url: "http://192.168.1.188:8080/home/node/MagicMirror/modules/calendars/Stuf.ics", symbol: 'calendar' } ] } }, { module: "compliments", position: "lower_third" }, { module: "weather", position: "top_right", config: { weatherProvider: "openmeteo", type: "current", lat: lat_var, lon: long_var } }, { module: "weather", position: "top_right", header: "Weather Forecast", config: { weatherProvider: "openmeteo", type: "forecast", lat: lat_var, lon: long_var } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") { module.exports = config; }