Images/pictures are shown very tiny.

[sdetweil]

@gerbenvs u should be able to change the size by using custom.css to set the height/width on that element

[Anthony]

@gerbenvs Hi. For me in the module’s config the qrSize works fine so check if you have place it correctly in your config file or else like sdetweil mentioned try to abjust the image size through your custom.css

[gerbenvs]

Hi @mumblebaj,
Thanks for your reply.

I have just configured this module, but the result is the same. With the size of ‘150’ the image is already very small. When I configure the setting imageSize to ‘400’, it stays at the same size.

this is the configuration:
{
module: ‘MMM-QRCode’,
position: ‘bottom_right’, // change the position according to your need bes$
config: {
text: ‘Just an example’, // enter your message here.
showRaw: true, // true = to show the text, false = to hide the text.
imageSize: 400, // size is in px (both the height and with are equa$
colorDark: “#fff”, // set qrcode px color.
colorLight: “#000”, // set backgroud background color(by default co$
}
},

It seems like when I restart the mm container, for half a second the image is large, but changes back to small.

[gerbenvs]

hi @sdetweil ,
I’ve tried many settings like this one:

.MMM-WiFiPassword .qr-image {
width: 300px;
height: 300px;
}

But then I get this:

So only the white area is bigger, the QR itself is still very small.

[gerbenvs]

Hi @Anthony

Thanks for your reply. See other messages. The setting doesn work for me.
It seems to work for almost half a second, but getting small again.
This seems to be for several QR code modules, but also for picture modules. Both QR codes and pictures getting the same (small) size.

[gerbenvs]

Hi all,
I have opened a browser and connected to the mirror. Opened the developer tools and checked the settings for the module.
I found out that the QRcode itself showed as ‘img’.
I have adjusted the custom.css with following settings:

.MMM-WiFiPassword #WiFiPassword {
width: 140px;
}

.MMM-WiFiPassword img {
width: 125px;
height: 125px;
}

Now the QR code is showing in the correct size:

Thank you for the support, it’s really appreciated!

Gerben