MMM-futar - how to add modules multiple time?

[0livia]

@sdetweil said in MMM-futar - how to add modules multiple time?:

trailing quote mark

I did find the trailing quote mark was missing :)

when i first installed the module i did npm install in the module folder.
Should I do it again after modifying the config js?

I do not have this request module thingy i already done that, the mirror actually works fine evewn with the mmm-futar modul(just only one single item) as I want to add more 2 with the provided example just black screen

[sdetweil]

@0livia can u post the exact config for these modules?

please use the code mark wrapper

paste your text
select it all
hit the button above the editor that looks like </>

[0livia]

@sdetweil it is on pastebin but i can put ot here if you like.

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "hu",
	locale: "hu-HU",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "Hungary",
				locationID: "3044475", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "001ffggghjkd4958e701a4e2a8340bbc"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Hungary",
				locationID: "3044475", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "001ffggghjkd4958e701a4e2a8340bbc"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "HVG TECH TUDOMÁNY HÍREK",
						url: "http://hvg.hu/rss/tudomany"
					},
                    			{
						title: "BBC VILÁG HÍREK",
						url: "http://feeds.bbci.co.uk/news/world/rss.xml"
					},
                    			{
						title: "TELEX HÍREK",
						url: "https://www.index.hu/kulfold/rss"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
        {
       module: "MMM-network-signal",
       position: "top_center",
       config: {
           // Configuration of the module goes here
       }
   },  
       {
        module: 'MMM-Futar',
        position: 'top_center',
        config: {
        stopId: 'BKK_044033',
        routeId: '',
        }
    },
        {
        module: 'MMM-Futar',
        position: 'top_center',
        header: 'Ráckeve -> Közvágóhíd',
        config: {
        stopId: 'BKK_007947',  // Ráckeve
        routeId: 'BKK_H6',
        }
        },
        {
        module: "MMM-Futar",
        position: "top_center",
        header: 'Közvágóhíd -> Ráckeve',
        config: {
        stopId: 'BKK_009628',  // Közvágóhíd
        routeId: 'BKK_H6',
            }
        },
        {
        minutesAfter: 50,
        hideStopTimesInNextMinutes: 0,
        updateInterval: 60000, // 1 minute in milliseconds
        showHead: true, // true | false
        showSymbolInHead: true, // true | false
        showSymbolInStopTime: false, // true | false
        showRouteNameInStopTime: false, // true | false
        maxNumberOfItems: 3,
        align: 'left', // 'left' | 'right'
        fade: true,
        fadePoint: 0.25,
        coloredSymbolInHead: true, // true | false
        coloredTextInHead: true, // true | false
        coloredSymbolInStopTime: true, // true | false
        coloredRouteNameInStopTime: true, // true | false
        symbolColors: {
          tram: '#ffcf42', // yellow-ish
          bus: '#1a9fed', // blue-ish
          subway: '#b3090c', // red-ish
          trolleybus: '#931517', // dark red-ish
          rail: '#5cbc82', // green-ish
          ferry: '#1a52ed' // dark-blue-ish
        },
        alerts: {
          showHeaderInStopTime: true, // true | false
          showSymbolInStopTime: true, // true | false
          color: '#ffcf42', // 'auto' or any CSS color
          language: 'hu' // 'en' or 'hu' supported only by the Futár API
        }
      }
   ]
};
      
	
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[sdetweil]

@0livia said in MMM-futar - how to add modules multiple time?:

{
minutesAfter: 50,
hideStopTimesInNextMinutes: 0,
updateInterval: 60000, // 1 minute in milliseconds
showHead: true, // true | false
showSymbolInHead: true, // true | false
showSymbolInStopTime: false, // true | false
showRouteNameInStopTime: false, // true | false
maxNumberOfItems: 3,
align: ‘left’, // ‘left’ | ‘right’
fade: true,
fadePoint: 0.25,
coloredSymbolInHead: true, // true | false
coloredTextInHead: true, // true | false
coloredSymbolInStopTime: true, // true | false
coloredRouteNameInStopTime: true, // true | false
symbolColors: {
tram: ‘#ffcf42’, // yellow-ish
bus: ‘#1a9fed’, // blue-ish
subway: ‘#b3090c’, // red-ish
trolleybus: ‘#931517’, // dark red-ish
rail: ‘#5cbc82’, // green-ish
ferry: ‘#1a52ed’ // dark-blue-ish
},

your three modules work perfectly

the ‘problem’ is this config, as it has no ‘module’ or ‘position’ or ‘config’:{} section

[0livia]

@sdetweil so what do i need to modify?

[sdetweil]

@0livia the section I copied is incomplete…

what module is that for?
where do you want it (position:)
and I ‘guess’ all that should be inside the config: {} section

a module is

{   
    module:  name,
    position: xxxx,
    config: {
     ...
     ...  module specific config 
     ...
    }
}

please read the topics listed in my signature, they will help a lot… I didn’t write them

[0livia]

@sdetweil i do not know hwat do you mean sorry.

if you have read the config js evrything is there, the module name position etc

{
        module: 'MMM-Futar',
        position: 'top_center',
        config: {
        stopId: 'BKK_044033',
        routeId: '',
        }
    },
        {
        module: 'MMM-Futar',
        position: 'top_center',
        header: 'Ráckeve -> Közvágóhíd',
        config: {
        stopId: 'BKK_007947',  // Ráckeve
        routeId: 'BKK_H6',
        }
        },
        {
        module: "MMM-Futar",
        position: "top_center",
        header: 'Közvágóhíd -> Ráckeve',
        config: {
        stopId: 'BKK_009628',  // Közvágóhíd
        routeId: 'BKK_H6',
            }

[sdetweil]

@0livia it is NOT the Futar module setup… its the stuff AFTER

this stuff

  {
        minutesAfter: 50,
        hideStopTimesInNextMinutes: 0,
        updateInterval: 60000, // 1 minute in milliseconds
        showHead: true, // true | false
        showSymbolInHead: true, // true | false
        showSymbolInStopTime: false, // true | false
        showRouteNameInStopTime: false, // true | false
        maxNumberOfItems: 3,
        align: 'left', // 'left' | 'right'
        fade: true,
        fadePoint: 0.25,
        coloredSymbolInHead: true, // true | false
        coloredTextInHead: true, // true | false
        coloredSymbolInStopTime: true, // true | false
        coloredRouteNameInStopTime: true, // true | false
        symbolColors: {
          tram: '#ffcf42', // yellow-ish
          bus: '#1a9fed', // blue-ish
          subway: '#b3090c', // red-ish
          trolleybus: '#931517', // dark red-ish
          rail: '#5cbc82', // green-ish
          ferry: '#1a52ed' // dark-blue-ish
        },
}

[0livia]

@sdetweil yes that is correct.

[sdetweil]

@0livia it MUST have more info to be in the modules:[] list

it is missing the REQUIRED module: , position: and config: {} sections

[0livia]

@sdetweil sorry i do not understand you

[0livia]

@0livia the mirror actually works with only one item
https://imgur.com/a/j1iYnaN

, as soon as i edit the config js

{
            module: "MMM-Futar",
            position: "top_left",
            header: 'Közvágóhíd -> Ráckeve',
            config: {
                stopId: 'BKK_009628',  // Közvágóhíd
                routeId: 'BKK_H6,
            }
        },
        {
            module: "MMM-Futar",
            position: "top_left",
            header: 'Ráckeve -> Közvágóhíd',
            config: {
                stopId: 'BKK_007947',  // Ráckeve
                routeId: 'BKK_H6',
            }

it stop working

[sdetweil]

@0livia said in MMM-futar - how to add modules multiple time?:

    {
        module: "MMM-Futar",
        position: "top_left",
        header: 'Ráckeve -> Közvágóhíd',
        config: {
            stopId: 'BKK_007947',  // Ráckeve
            routeId: 'BKK_H6',
        }

that is missing the } of the module:

so the following stuff becomes part of the last futar module block

remove this from config.js

{
        minutesAfter: 50,
        hideStopTimesInNextMinutes: 0,
        updateInterval: 60000, // 1 minute in milliseconds
        showHead: true, // true | false
        showSymbolInHead: true, // true | false
        showSymbolInStopTime: false, // true | false
        showRouteNameInStopTime: false, // true | false
        maxNumberOfItems: 3,
        align: 'left', // 'left' | 'right'
        fade: true,
        fadePoint: 0.25,
        coloredSymbolInHead: true, // true | false
        coloredTextInHead: true, // true | false
        coloredSymbolInStopTime: true, // true | false
        coloredRouteNameInStopTime: true, // true | false
        symbolColors: {
          tram: '#ffcf42', // yellow-ish
          bus: '#1a9fed', // blue-ish
          subway: '#b3090c', // red-ish
          trolleybus: '#931517', // dark red-ish
          rail: '#5cbc82', // green-ish
          ferry: '#1a52ed' // dark-blue-ish
        },
}

[0livia]

@sdetweil when removed the bit you suggested it is working now.
The thing is what i do not understand that it worked before removing the section from the config.js just only with one single item. Anyway thank you for your help guys!