ChatGpt developed Module MMM-Dockerstat

mumblebaj

@Rags Need to be bit more specific with what issues you are experiencing. If you are running you mirror with npm start then list the output from npm. Also check the developer console (shift + ctrl+i) and see if there are any errors there.

Rags

@mumblebaj
Thanks for the help, i am running with npm start. The display does not show the status of the docker containers. Instead the rotating arrow is continuously displayed.
I don’t know if the these error messages will indicate something, however here goes

The error msg with npm start;
02.04.2023 17:12.36.528] [LOG] Host 192.168.1.200 is offline.
[02.04.2023 17:12.36.530] [ERROR] (node:11566) UnhandledPromiseRejectionWarning: TypeError: Cannot read properties of undefined (reading ‘info’)
at /home/pi/MagicMirror/modules/MMM-Dockerstat/node_helper.js:59:21
at /home/pi/MagicMirror/modules/MMM-Dockerstat/node_modules/ping/lib/ping-sys.js:40:9
[02.04.2023 17:12.36.531] [ERROR] (node:11566) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). To terminate the node process on unhandled promise rejection, use the CLI flag --unhandled-rejections=strict (see https://nodejs.org/api/cli.html#cli_unhandled_rejections_mode). (rejection id: 5)
with developer console;

Failed to load resource: the server responded with a status of 404 (Not Found)
0.0.0.0/:1 Refused to execute script from ‘http://0.0.0.0:8088/modules/MMM-Dockerstat/fontawesome.js’ because its MIME type (‘text/html’) is not executable, and strict MIME type checking is enabled.
loader.js:194 Error on loading script: modules/MMM-Dockerstat/fontawesome.js
script.onerror @ loader.js:194

mumblebaj

@Rags Lots of issues in the code you had. I created a PR. Check it out.

Rags

@mumblebaj
Yes Sir. I noticed the changes committed by you and I immediately approved the merge commit. Please understand this is my first attempt and I had ChatGPT to help me. I guess we both are still learning. Well, I cloned the fresh updated repository and installed it. Now when i run it the constantly rotating arrow is not displayed anymore, but even the status of the containers are not being displayed. The npm start logs do not have any error messages. The dev console is also not indicating any issue. So probably some more debug is required. Sincere request to keep assisting till it is resolved.
Thanks

mumblebaj

@Rags Unfortunately I don’t have a docker running here so cannot test that portion of your code. You need to supply the docker name as an input parameter to feed into .exec(`sudo docker ps -f name=${payload.container} --format "{{.Names}} {{.Status}}"`)

Have you added this into the config.js?

sdetweil

@mumblebaj can u see the container names from inside a container?

mumblebaj

@sdetweil No idea. Never worked with containers before. (Shocking I know :astonished_face: ) Just gave him a bit of code to get the module running correct up until the point he has to check the status of the container code.

Rags

@mumblebaj {
module: ‘MMM-Dockerstat’,
header: ‘Docker Status’,
position: ‘top_right’,
config: {
host: ‘192.168.1.200’, // IP address of the second Pi running Docker
interval: 600000, //60 seconds
user:‘pi’,
password:‘mypass’,
container: ‘wireguard’, // just added to check
offlineIcon: ‘fa-times-circle’, // Font Awesome icon for offline status
onlineIcon: ‘fa-check-circle’ // Font Awesome icon for online status
}
},
Yes i added the name of the container. It is still not displaying the status. Anyways the idea was for the module to probe and display the status of all containers running in docker.

Rags

@sdetweil said in ChatGpt developed Module MMM-Dockerstat:

@mumblebaj can u see the container names from inside a container?

‘Docker ps’ command list all the containers that are currently running. So i guess the command will execute and should be able to confirm the status with the command
" ‘.exec(sudo docker ps -f name=${payload.container} --format "{{.Names}} {{.Status}}")’"

This command uses the Docker CLI (Command Line Interface) to list the running Docker containers on a host, filtering the results by the name of the container specified in payload.container. The --format option specifies how to format the output of the docker ps command. In this case, {{.Names}} {{.Status}} is used to output only the names and statuses of the containers that match the specified filter. The output is then captured and processed by the SSH library used in the code.

anyways " work in progress ".

mumblebaj

@Rags The output from the query does not return a Status of “Online”

See below what it returns.