MM crashing (after pi os update?)

wmx

The sd card is about one year old and half a year in use in the raspberry pi. It is a 16GB card.
So you think I need to replace it? I have to do a complete new install?

sdetweil

@wmx u might be able to copy your config file and the modules folder.

once the card is full, all the bits written, it is dead. no repair.

weird things starting to happen is an indicator.

weekly updates is a space consumer.

wmx

@sdetweil
I do NOT think the sd card is the reason here. I tried the following.
Took a completely new second 32GB card, on which I installed MM 2.13.0 in december 2020. This card did only run for some hours in december. Pi came up and MM runs manually started with

DISPLAY=:0 npm start

for about half an hour.
Then I decided to update MM (this was the fault here… :-( )
After Upgrading MM to 2.15.0 (and updating all modules) the same problem occurs with this card!

pi@mirror:~/MagicMirror $ DISPLAY=:0 npm start

> magicmirror@2.15.0 start /home/pi/MagicMirror
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[23.04.2021 00:04.37.808] [LOG]   Starting MagicMirror: v2.15.0
[23.04.2021 00:04.37.827] [LOG]   Loading config ...
[23.04.2021 00:04.46.211] [LOG]   Starting node helper for: MMM-Remote-Control
[23.04.2021 00:04.46.259] [LOG]   MMM-MQTT: Starting node helper
[23.04.2021 00:04.46.264] [LOG]   Starting node_helper for module: MyCovid19
[23.04.2021 00:05.18.598] [LOG]   MMM-MQTT: Starting client for:  {
*** skipped same lines here ***
}
[23.04.2021 00:05.18.626] [LOG]   MMM-MQTT: Connecting to mqtt://moon.fritz.box:1883
[23.04.2021 00:05.22.193] [LOG]   MMM-MQTT connected to mqtt://moon.fritz.box:1883
[23.04.2021 00:05.22.202] [LOG]   MMM-MQTT: subscribing to sensor/wemos-schuppen-temp
[23.04.2021 00:05.22.563] [ERROR] Failed to fetch git data for MyCovid19: Error: block timeout reached
[23.04.2021 00:05.23.732] [ERROR] Failed to fetch git data for MMM-homeassistant-sensors: Error: block timeout reached
[23.04.2021 00:05.25.023] [ERROR] Failed to fetch git data for MMM-MQTT: Error: block timeout reached
[23.04.2021 00:05.26.530] [ERROR] Failed to fetch git data for MMM-PIR-Sensor: Error: block timeout reached
[23.04.2021 00:05.34.347] [ERROR] Failed to fetch git data for MMM-Remote-Control: Error: block timeout reached
[23.04.2021 00:05.35.557] [ERROR] Failed to fetch git data for default: Error: block timeout reached

<--- Last few GCs --->

[7523:0x77c8000]   113993 ms: Scavenge 210.7 (221.1) -> 210.2 (221.6) MB, 29.0 / 0.0 ms  (average mu = 0.795, current mu = 0.754) task
[7523:0x77c8000]   114350 ms: Scavenge (reduce) 211.9 (221.9) -> 211.3 (220.1) MB, 103.9 / 0.0 ms  (average mu = 0.795, current mu = 0.754) allocation failure
[7523:0x77c8000]   114759 ms: Scavenge (reduce) 212.8 (220.6) -> 212.3 (220.9) MB, 134.6 / 0.0 ms  (average mu = 0.795, current mu = 0.754) allocation failure


<--- JS stacktrace --->

/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! magicmirror@2.15.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the magicmirror@2.15.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2021-04-22T22_06_32_848Z-debug.log

and the log

pi@mirror:~/MagicMirror $ cat /home/pi/.npm/_logs/2021-04-22T22_06_32_848Z-debug.log
0 info it worked if it ends with ok
1 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
2 info using npm@6.14.8
3 info using node@v10.23.0
4 verbose run-script [ 'prestart', 'start', 'poststart' ]
5 info lifecycle magicmirror@2.15.0~prestart: magicmirror@2.15.0
6 info lifecycle magicmirror@2.15.0~start: magicmirror@2.15.0
7 verbose lifecycle magicmirror@2.15.0~start: unsafe-perm in lifecycle true
8 verbose lifecycle magicmirror@2.15.0~start: PATH: /usr/lib/node_modules/npm/node_modules/npm-lifecycle/node-gyp-bin:/home/pi/MagicMirror/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
9 verbose lifecycle magicmirror@2.15.0~start: CWD: /home/pi/MagicMirror
10 silly lifecycle magicmirror@2.15.0~start: Args: [ '-c',
10 silly lifecycle   'DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js' ]
11 silly lifecycle magicmirror@2.15.0~start: Returned: code: 1  signal: null
12 info lifecycle magicmirror@2.15.0~start: Failed to exec start script
13 verbose stack Error: magicmirror@2.15.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js`
13 verbose stack Exit status 1
13 verbose stack     at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/index.js:332:16)
13 verbose stack     at EventEmitter.emit (events.js:198:13)
13 verbose stack     at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
13 verbose stack     at ChildProcess.emit (events.js:198:13)
13 verbose stack     at maybeClose (internal/child_process.js:982:16)
13 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
14 verbose pkgid magicmirror@2.15.0
15 verbose cwd /home/pi/MagicMirror
16 verbose Linux 5.4.79-v7+
17 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
18 verbose node v10.23.0
19 verbose npm  v6.14.8
20 error code ELIFECYCLE
21 error errno 1
22 error magicmirror@2.15.0 start: `DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js`
22 error Exit status 1
23 error Failed at the magicmirror@2.15.0 start script.
23 error This is probably not a problem with npm. There is likely additional logging output above.
24 verbose exit [ 1, true ]

Sorry, but this is no accident.

Is there a way to go back to MM 2.13.0?

sdetweil

@wmx did u use my upgrade script?

see

https://github.com/sdetweil/MagicMirror_scripts

wmx

@sdetweil
No, this time i did it manually. I used it for upgrading my first card (from first post).

Can I use it now for a second time now?

sdetweil

@wmx u can try, use the force parm instead of apply

wmx

@sdetweil reran script with force, but still same issue

sdetweil

@wmx weird.

if u install 2.15 by itself does it run?
then copy your module over and config.js

wmx

@sdetweil ok, I’m going to test this with one module and going to enable one by one…

wmx

@sdetweil here first test results:

If i disable your MyCovid19 modules (both of the two active) the system runs without crashing.
I reduced config step by step to only these three modules (only configured one of each)

ottopaulsen/MMM-MQTT
Snille/MMM-homeassistant-sensors
sdetweil/MyCovid19
the system crashed. But I can not reproduce it. Each combination of two of these three is running.

How to look further?