Read the statement by Michael Teeuw here.
MMM-Clap
-
@smarthome
Sorry for my Poor English. I cannot still get your words.
Tell me your scenario or use case for using CLAP_RESUME/CLAP_PAUSE. these both might be used when Mic should be released or re-obtained for other module’s usage. In other cases, usually you don’t need to care these.
Why do you need and with which modules? -
@Cr4z33
Show me the log. If works; Belows should be shown.Connecting socket for: MMM-Clap Sockets connected & modules started ... Launching application. [CLAP] Starts. -
@Sean
npm start > magicmirror@2.8.0 start /home/pi/MagicMirror > sh run-start.sh Starting MagicMirror: v2.8.0 Loading config ... Loading module helpers ... Initializing new module helper ... Module helper loaded: MMM-Clap Initializing new module helper ... Module helper loaded: MMM-WatchDog Initializing new module helper ... Module helper loaded: MMM-Remote-Control Initializing new module helper ... Module helper loaded: MMM-RTSPStream No helper found for module: alert. Initializing new module helper ... Module helper loaded: updatenotification Initializing new module helper ... Module helper loaded: newsfeed Initializing new module helper ... Module helper loaded: MMM-AssistantMk2 No helper found for module: clock. Initializing new module helper ... Module helper loaded: MMM-Spotify Initializing new module helper ... Module helper loaded: MMM-DarkSkyForecast Initializing new module helper ... Module helper loaded: MMM-PushBulletNotifications Initializing new module helper ... Module helper loaded: MMM-Hotword All module helpers loaded. Starting server on port 8080 ... You're using a full whitelist configuration to allow for all IPs Server started ... Connecting socket for: MMM-Clap Connecting socket for: MMM-WatchDog Starting module helper: MMM-WatchDog Connecting socket for: MMM-Remote-Control Starting node helper for: MMM-Remote-Control Connecting socket for: MMM-RTSPStream PM2: Stopping all OMXPlayer Streams... Connecting socket for: updatenotification Connecting socket for: newsfeed Starting module: newsfeed Connecting socket for: MMM-AssistantMk2 Connecting socket for: MMM-Spotify [SPOTIFY_AUTH] Token is fresh. Connecting socket for: MMM-DarkSkyForecast ====================== Starting node_helper for module [MMM-DarkSkyForecast] Connecting socket for: MMM-PushBulletNotifications Connecting socket for: MMM-Hotword [HOTWORD] MMM-Hotword starts Sockets connected & modules started ... Launching application. WatchDog started. Maximum timeout: 10s. Create new news fetcher for url: https://eur.fxexchangerate.com/usd.xml - Interval: 300000 Create new news fetcher for url: https://www.ansa.it/sito/notizie/topnews/topnews_rss.xml - Interval: 300000 Create new news fetcher for url: https://www.ansa.it/sito/notizie/mondo/mondo_rss.xml - Interval: 300000 Create new news fetcher for url: https://feeds.hwupgrade.it/rss_hwup.xml - Interval: 300000 Create new news fetcher for url: http://feeds.feedburner.com/hd-blog?format=xml - Interval: 300000 Create new news fetcher for url: https://www.tomshw.it/feed/ - Interval: 300000 Create new news fetcher for url: https://www.punto-informatico.it/feed/ - Interval: 300000 Create new news fetcher for url: http://www.lecceprima.it/rss/ - Interval: 300000 Create new news fetcher for url: http://www.galatina.it/rss.xml - Interval: 300000 [AMK2] Recipe is loaded: hide_and_show_all_modules.js [AMK2] Recipe is loaded: reboot.js [AMK2] Recipe is loaded: screen_onoff.js [AMK2] Recipe is loaded: shutdown.js [MMM-PushBulletNotifications][Info] 12:24:12.329 - START received [CLAP] Starts. [AMK2] Temporal storage directory is clearing. [HOTWORD] begins. [HOTWORD] Detector starts listening. [MMM-PushBulletNotifications][Info] 12:24:15.355 - PushBullet connected ^CShutting down server... Stopping module helper: MMM-Clap Stopping module helper: MMM-WatchDog Shutting down MMM-RTSPStream streams that were using vlc Stopping module helper: updatenotification Stopping module helper: newsfeed Stopping module helper: MMM-AssistantMk2 Stopping module helper: MMM-Spotify Stopping module helper: MMM-DarkSkyForecast Stopping module helper: MMM-PushBulletNotifications Stopping module helper: MMM-Hotword [HOTWORD] Final Result: { detected: false } [HOTWORD] begins. [HOTWORD] Detector starts listening. -
@Cr4z33
You are using MMM-Clap & MMM-Hotword at a same time. Have you 2 mics?
Or you should control taking & releasing the mic between modules. I don’t recommend. -
@Sean I’ve got one USB mic.
Sorry I am not sure you gave me the solution. :smiling_face_with_open_mouth_cold_sweat:
Say again? -
@Cr4z33
MMM-Clap and MMM-Hotword will compete each other to take one mic. I think you’d better to use just one module. At least one module at a time. You can make juggling withCLAP_RESUME,CLAP_PAUSE,HOTWORD_RESUME,HOTWORD_PAUSEto confirm only one module uses a mic at a time. But too complex. not recommended. -
@Sean
The scenario is:
Step 1: Clap action
Step 2: Clap sound detected, MMM Clap send output notification to MMM Page Selector while Mic still not released yet
Step 3: MMM Page Selector receive input notification then change page
Step 4: MMM Page Selector sends output notification CLAP_PAUSE to MMM Page Selector to release the MIC and waitting for next clap sound -
@smarthome said in MMM-Clap:
Step 1: Clap action
Step 2: Clap sound detected, MMM Clap send output notification to MMM Page Selector while Mic still not released yet
Step 3: MMM Page Selector receive input notification then change page
Step 4: MMM Page Selector sends output notification CLAP_PAUSE to MMM Page Selector to release the MIC and waitting for next clap soundIn this real usage, You don’t need to release mic at all. MMM-Page-Selector doesn’t use any mic. So why do you need to release mic for changing pages? Mic Releasing is needed only when your other module wants to use the same Mic (like MMM-AssistantMk2). Unless you set
restart:false, MMM-Clap will be restarted automatically after detection regardless other module’s job.And If you REALLY want to have a feature - sending some specific notification from specific module -, request module creator to do so. But with this case, I don’t think it needs.
-
@Sean said in MMM-Clap:
And If you REALLY want to have a feature - sending some specific notification from specific module -,
Fortunately(???) There is already a solution about this;
As far as I knowMMM-Page-Selectorcould emitPAGE_CHANGEDnotification.
All you need is to translate that notification to what you need. AndMMM-NotificationTriggermodule could do that job. -
@Sean said in MMM-Clap:
@Cr4z33
MMM-Clap and MMM-Hotword will compete each other to take one mic. I think you’d better to use just one module. At least one module at a time. You can make juggling withCLAP_RESUME,CLAP_PAUSE,HOTWORD_RESUME,HOTWORD_PAUSEto confirm only one module uses a mic at a time. But too complex. not recommended.Oh now I got it.
Thanks however I will then keep using MMM-Hotwords.
Too precious for my voice command needs hehe. 😁
