MMM-Clap

A Former User

@Cr4z33
Show me the log. If works; Belows should be shown.

Connecting socket for: MMM-Clap
Sockets connected & modules started ...
Launching application.
[CLAP] Starts.

Cr4z33

@Sean

npm start

> magicmirror@2.8.0 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.8.0
Loading config ...
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: MMM-Clap
Initializing new module helper ...
Module helper loaded: MMM-WatchDog
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-RTSPStream
No helper found for module: alert.
Initializing new module helper ...
Module helper loaded: updatenotification
Initializing new module helper ...
Module helper loaded: newsfeed
Initializing new module helper ...
Module helper loaded: MMM-AssistantMk2
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: MMM-Spotify
Initializing new module helper ...
Module helper loaded: MMM-DarkSkyForecast
Initializing new module helper ...
Module helper loaded: MMM-PushBulletNotifications
Initializing new module helper ...
Module helper loaded: MMM-Hotword
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: MMM-Clap
Connecting socket for: MMM-WatchDog
Starting module helper: MMM-WatchDog
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-RTSPStream
PM2: Stopping all OMXPlayer Streams...
Connecting socket for: updatenotification
Connecting socket for: newsfeed
Starting module: newsfeed
Connecting socket for: MMM-AssistantMk2
Connecting socket for: MMM-Spotify
[SPOTIFY_AUTH] Token is fresh.
Connecting socket for: MMM-DarkSkyForecast
====================== Starting node_helper for module [MMM-DarkSkyForecast]
Connecting socket for: MMM-PushBulletNotifications
Connecting socket for: MMM-Hotword
[HOTWORD] MMM-Hotword starts
Sockets connected & modules started ...
Launching application.
WatchDog started. Maximum timeout: 10s.
Create new news fetcher for url: https://eur.fxexchangerate.com/usd.xml - Interval: 300000
Create new news fetcher for url: https://www.ansa.it/sito/notizie/topnews/topnews_rss.xml - Interval: 300000
Create new news fetcher for url: https://www.ansa.it/sito/notizie/mondo/mondo_rss.xml - Interval: 300000
Create new news fetcher for url: https://feeds.hwupgrade.it/rss_hwup.xml - Interval: 300000
Create new news fetcher for url: http://feeds.feedburner.com/hd-blog?format=xml - Interval: 300000
Create new news fetcher for url: https://www.tomshw.it/feed/ - Interval: 300000
Create new news fetcher for url: https://www.punto-informatico.it/feed/ - Interval: 300000
Create new news fetcher for url: http://www.lecceprima.it/rss/ - Interval: 300000
Create new news fetcher for url: http://www.galatina.it/rss.xml - Interval: 300000
[AMK2] Recipe is loaded: hide_and_show_all_modules.js
[AMK2] Recipe is loaded: reboot.js
[AMK2] Recipe is loaded: screen_onoff.js
[AMK2] Recipe is loaded: shutdown.js
[MMM-PushBulletNotifications][Info] 12:24:12.329 - START received
[CLAP] Starts.
[AMK2] Temporal storage directory is clearing.
[HOTWORD] begins.
[HOTWORD] Detector starts listening.
[MMM-PushBulletNotifications][Info] 12:24:15.355 - PushBullet connected
^CShutting down server...
Stopping module helper: MMM-Clap
Stopping module helper: MMM-WatchDog
Shutting down MMM-RTSPStream streams that were using vlc
Stopping module helper: updatenotification
Stopping module helper: newsfeed
Stopping module helper: MMM-AssistantMk2
Stopping module helper: MMM-Spotify
Stopping module helper: MMM-DarkSkyForecast
Stopping module helper: MMM-PushBulletNotifications
Stopping module helper: MMM-Hotword
[HOTWORD] Final Result: { detected: false }
[HOTWORD] begins.
[HOTWORD] Detector starts listening.

A Former User

@Cr4z33
You are using MMM-Clap & MMM-Hotword at a same time. Have you 2 mics?
Or you should control taking & releasing the mic between modules. I don’t recommend.

Cr4z33

@Sean I’ve got one USB mic.

Sorry I am not sure you gave me the solution. :smiling_face_with_open_mouth_cold_sweat:
Say again?

A Former User

@Cr4z33
MMM-Clap and MMM-Hotword will compete each other to take one mic. I think you’d better to use just one module. At least one module at a time. You can make juggling with CLAP_RESUME, CLAP_PAUSE, HOTWORD_RESUME, HOTWORD_PAUSE to confirm only one module uses a mic at a time. But too complex. not recommended.

smarthome

@Sean
The scenario is:
Step 1: Clap action
Step 2: Clap sound detected, MMM Clap send output notification to MMM Page Selector while Mic still not released yet
Step 3: MMM Page Selector receive input notification then change page
Step 4: MMM Page Selector sends output notification CLAP_PAUSE to MMM Page Selector to release the MIC and waitting for next clap sound

A Former User

@smarthome said in MMM-Clap:

Step 1: Clap action
Step 2: Clap sound detected, MMM Clap send output notification to MMM Page Selector while Mic still not released yet
Step 3: MMM Page Selector receive input notification then change page
Step 4: MMM Page Selector sends output notification CLAP_PAUSE to MMM Page Selector to release the MIC and waitting for next clap sound

In this real usage, You don’t need to release mic at all. MMM-Page-Selector doesn’t use any mic. So why do you need to release mic for changing pages? Mic Releasing is needed only when your other module wants to use the same Mic (like MMM-AssistantMk2). Unless you set restart:false, MMM-Clap will be restarted automatically after detection regardless other module’s job.

And If you REALLY want to have a feature - sending some specific notification from specific module -, request module creator to do so. But with this case, I don’t think it needs.

A Former User

@smarthome

@Sean said in MMM-Clap:

And If you REALLY want to have a feature - sending some specific notification from specific module -,

Fortunately(???) There is already a solution about this;
As far as I know MMM-Page-Selector could emit PAGE_CHANGED notification.
All you need is to translate that notification to what you need. And MMM-NotificationTrigger module could do that job.

Cr4z33

@Sean said in MMM-Clap:

@Cr4z33
MMM-Clap and MMM-Hotword will compete each other to take one mic. I think you’d better to use just one module. At least one module at a time. You can make juggling with CLAP_RESUME, CLAP_PAUSE, HOTWORD_RESUME, HOTWORD_PAUSE to confirm only one module uses a mic at a time. But too complex. not recommended.

Oh now I got it.

Thanks however I will then keep using MMM-Hotwords.

Too precious for my voice command needs hehe. 😁

smarthome

@Sean
I’d already, but didn’t work

{
		  module: "MMM-NotificationTrigger",
		  //This module works in Background, so you don't need to describe `position`.
		  config: {
			useWebhook: false, // If you want to activate webhook as Notification emitter, set true. (eg. IFTTT)
			triggers:[ // Array of triggers.
			  {
				trigger: "PAGE_CHANGED", //REQUIRED
				triggerSenderFilter: (sender) => { //OPTIONAL should return true or false
				  if (sender == "MMM-Page-Selector") {
					return true
				  }
				  return false
				},
				triggerPayloadFilter: (payload) => { //OPTIONAL should return true or false
				  if (typeof payload.value !== 'undefined' && payload.value > 0) {
					return true
				  }
				  return false
				},
				fires: [ // Array of fires. You can enable multi-firing with one trigger.
				  {
					fire:"CLAP_RESUME", //REQUIRED
					payload: (payload) => { //OPTIONAL. transform received payload to what your target module wants.
					  return payload
					},
		 //           delay: 1000, //OPTIONAL, if this is set, your outgoing notification will be fired after delay.
		 //           exec: "ls -l" //OPTIONAL, if exists, this script will be executed, and the result will be returned with "OUTGOING_NOTIFICATION_RESULT" and payload.  Can also be specified as a function which accepts the payload as an argument and returns the command to execute.
				  },
				],
			  },
			]
		  }
		},