MagicMirror² v2.13.0 is available! For more information about this release, check out this topic.

MYMIRROR - From Modena



  • Hi, this is my mirror
    I used these modules and with Arduino I read the RFID tags (via serial notifications) to recognize the user (see the mirror photo, top right, there is the RFID tag reader) and show a personalized page

    MMM-NBA
    MMM-MyScoreboard
    MMM-cryptocurrency
    MMM-DarkSkyForecast
    MMM-NowPlayingOnSpotify
    MMM-TPLink
    mrx-work-traffic
    MMM-Traffic
    newsfeed
    MMM-Events
    MMM-AirQuality
    MMM-json-feed
    mmm-weatherchart
    MMM-History
    MMM-Serial-Notifications
    MMM-ProfileSwitcher
    MMM-page-indicator
    MMM-Buttons

    0_1571490850958_IMG_20191019_145754_resized_20191019_025832226.jpg 0_1571490861073_pagina1.jpg 0_1571490865417_pagina2.jpg 0_1571490869747_pagina3.jpg 0_1571490874696_IMG_20191019_145718_resized_20191019_025832012.jpg 0_1571490879115_miapagina.jpg



  • @s-monti-74 very cool… nicely done!



  • @sdetweil , don’t forget you helped me with serial notifications with Arduino…



  • @s-monti-74 said in MYMIRROR - From Modena:

    MMM-Serial-Notifications

    Very interested on this as well i have some rfid rings that i want to use and the rfid-rc522 and arduino uno. So basically everything needed.
    I gave a try to this https://forum.magicmirror.builders/topic/9983/profile-switcher-rc522-rfid?page=1 but i could not get it to work can you please guide me how to use the rfid to switch profiles

    Denis



  • This post is deleted!


  • This post is deleted!


  • I have done in this way.

    I Have installed Arduino IDE on RPI and to run on Arduino the program to send via serial communication ten information of the RFID it’s reading
    This in the programo uploaded on Arduino
    I use two RFID tags (TAG1 and TAG2)



  • This post is deleted!


  • ----------------------------------------------------
    #include 
    #include 
    
    #define SDA_DIO 10  // 53 per Mega
    #define RESET_DIO 9
    #define delayRead 1000 // Time of delay 
    #define delayLed 2000 
    #define ledVerde 3
    #define ledRosso 4
    RFID RC522(SDA_DIO, RESET_DIO); 
     
    String TAG1= "975318736";
    String TAG2= "976A15D37";
     
    void setup()
    { 
      Serial.begin(9600);
      /* Abilita SPI*/
      SPI.begin(); 
      /* Viene inizilizzato RFID reader */
      RC522.init();
      /*Serial.println("Setup");*/
      pinMode(ledVerde,OUTPUT);
      pinMode(ledRosso,OUTPUT);
    }
     
    void loop()
    {
      /* Temporary loop counter */
      byte i;
      // Se viene letta una tessera
      if (RC522.isCard())
      {
        RC522.readCardSerial();
        String codiceLetto ="";
        for(i = 0; i 


  • this program sends via serial communication the value “S” if i use TAG1 and “G” if I usa TAG2
    Then you have to use, on magic mirror, the module MMM-Serial-Notifications to read the value:

    {
        module: 'MMM-Serial-Notifications',
        config: {
          devices: {
            '/dev/ttyACM0': {
              messages: {
                'S': [
                  {
    		notification: 'CURRENT_PROFILE', 										
    		payload:  'S',
                  },
                ],
              'A': [
                  {
    		notification: 'CURRENT_PROFILE', 										
    		payload:  'G',
                  }
    
                ]
              }
            }
          }
        }
      },
    
    

    and the module MMM-ProfileSwitcher to manage all other modules:

    {
            		module: 'MMM-ProfileSwitcher',
    			classes: 'default',
    			header: "Profile",
            		config: {
    		
    				enterMessages: {
    					"G": "Ciao, G",
    					"S": "Ciao, S" 
    				},
    				leaveMessages: {
    					"G": "Ciao G, ci vediamo alla prossima", 
    					"S": "Ciao S, ci vediamo alla prossima",
    				},
    
    				timers: {
        				"S": {
            			time: 10 * 1000
        				},
        				"G": {
            			time: 10 * 1000
        				}
    			}
    
    		
    		
      		      }
        		},
    

    BYE
    Stefano


Log in to reply