erro MMM-HASS

sdetweil

@iorifly I will look at this tomorrow. Send me your config via text message

iorifly

Much! Thanks so much for helping me out! I do not know what else to do. I will send everything here to you.
by message is not going.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
    address: "localhost", // Address to listen on, can be:
                          // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                          // - another specific IPv4/6 to listen on a specific interface
                          // - "", "0.0.0.0", "::" to listen on any interface
                          // Default, when address config is left out, is "localhost"
    port: 8080,
    ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
                                                           // or add a specific IPv4 of 192.168.1.5 :
                                                           // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                           // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                           // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

    language: "pt",
    timeFormat: 24,
    units: "metric",
    // serverOnly:  true/false/"local" ,
                 // local for armv6l processors, default 
                 //   starts serveronly and then starts chrome browser
                 // false, default for all  NON-armv6l devices
                 // true, force serveronly mode, because you want to.. no UI on this device
    
    modules: [
        {
            module: "alert",
        },
        {
            module: "updatenotification",
            position: "top_bar"
        },
        {
            module: "clock",
            position: "top_left"
        },    
               {
            module: "calendar",
            header: "Feriados",
            position: "top_left",
            config: {
                calendars: [
                    {
                        symbol: "calendar-check",
                        url: "https://www.calendarlabs.com/ical-calendar/ics/37/Brazil_Holidays.ics"                    }
                ]
            }
        },
        {
            module: "compliments",
            position: "lower_third"
        },
        
        {
                       module: "MMM-DarkSkyForecast",
                       header: "Tempo em Duque de Caxias",
                       position: "top_right",
                       classes: "default everyone",
                       disabled: false,
                       config: {
                         apikey: "****",
                         latitude: "-22.787860",
                         longitude: "-43.303140",      
                         iconset: "4c",
                         units: "si",
                         concise: false,
                         forecastLayout: "table"
                      }
                },
        
                {
                module: 'MMM-Screencast',
                position: 'middle_center', // This position is for a hidden <div /> and not the screencast window
                config: {
                    position: 'center',
                    height: 300,
                    width: 500,
                }
               },
        
        
        
        {
                    module: "newsfeed",
                    position: "bottom_bar",
                    config: {
                        feeds: [
                            {
                                title: "Noticias R7",
                                url: "https://noticias.r7.com/rio-de-janeiro/feed.xml"
                            }
                        ],
                        showSourceTitle: true,
                        showPublishDate: true,
                        broadcastNewsFeeds: true,
                        broadcastNewsUpdates: true
                    }
                },
                        {
                module: "MMM-HASS",
                position: "middle_center",
                config: {
                        host: "192.168.1.158",
                        port: "8123",
                        apipassword: "jeure3027",
                        hassiotoken: false,
                        https: false,
                        devices: [
                        { deviceLabel: "Exterior",
                                deviceReadings: [
                                { sensor: "sensor.disk_free", icon: "wi wi-thermometer", suffix: "%"}
                                
                                ]
                          }
                        
                               ]
                        }       
        
             },
        
            ]
        
        };
        
        /*************** DO NOT EDIT THE LINE BELOW ***************/
        if (typeof module !== "undefined") {module.exports = config;}

sdetweil

@iorifly I can recreate the failure, but if I remove the MMM-HASS module, it doesn’t fail…

debugging, but not sure yet…
if I run serverOnly mode and and access the system from a browser on another system, that browser doesn’t report any unexpected errors…

pi0, raspian jessie,
node -v v10.17.0
npm -v 6.11.3

MM 2.10.0

chromium-browser --version
Chromium 56.0.2924.84 Built on Ubuntu 14.04, running on Raspbian 8.0

iorifly

@sdetweil said in erro MMM-HASS:

pi0, raspian jessie,

When I remove HASS it also works.

But I did not understand. You think there’s no way. Still debugging?

sdetweil

@iorifly yes, not home now. Will try to spend some time tomorrow

iorifly

I look forward to something tomorrow. Thank you for not leaving me!

iorifly

My exit when I request browser version

pi@raspberrypi:~/MagicMirror $ chromium-browser --version
 --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version=
Chromium 74.0.3729.157 Built on Raspbian , running on Raspbian 10

sdetweil

@iorifly

ok, i have found the problem… all my fault

edit ~/MagicMirror/run-start.sh

	#exec 3< &-           #  edit this line and comment out with leading #
	tee < &3 &             #  add this line  after the line above, no space between < and &3, forum is real trouble with <

iorifly

guy!!

I’m not home at the moment BUT HOW HAPPY I am. Will I be able to use the module? I will return as soon as possible to you. THANK YOU FOR HELPING ME AND NOT ABANDONING THE BOAT.

sdetweil

@iorifly it is not a module problem, but a script problem…

the module runs, but I don’t know how it works, so that will be next work for you