Read the statement by Michael Teeuw here.
MMM-AlexaControl or MMM-AlexaOn/Off setup
-
@Michael-Schw my echo is a gen 1, and dots are gen 2.
do u see the messages like I listed at mm startup? (from 5th post to this topic) also, would be startPort:19000 not 1900.
port 1900 is hard coded to the ssdp discovery port, used by Alexa to find devices
if u see the messages, and add the debugging from above, do u see the discovery request?
show me the mm startup.messages
-
This post is deleted! -
Spotify is disabled, starting port at default and the MM startup messenges are:
magicmirror@2.12.0 start /home/pi/MagicMirror
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js[2020-08-10 10:06:51.201] [LOG] Starting MagicMirror: v2.12.0
[2020-08-10 10:06:51.214] [LOG] Loading config …
[2020-08-10 10:06:51.228] [LOG] Loading module helpers …
[2020-08-10 10:06:51.232] [LOG] No helper found for module: clock.
[2020-08-10 10:06:51.360] [LOG] Initializing new module helper …
[2020-08-10 10:06:51.361] [LOG] Module helper loaded: updatenotification
[2020-08-10 10:06:51.362] [LOG] No helper found for module: currentweather.
[2020-08-10 10:06:51.363] [LOG] No helper found for module: weatherforecast.
[2020-08-10 10:06:52.187] [LOG] Initializing new module helper …
[2020-08-10 10:06:52.188] [LOG] Module helper loaded: MMM-AlexaControl
[2020-08-10 10:06:52.194] [LOG] Initializing new module helper …
[2020-08-10 10:06:52.195] [LOG] Module helper loaded: MMM-OnScreenMenu
[2020-08-10 10:06:52.196] [LOG] All module helpers loaded.
[2020-08-10 10:06:52.535] [LOG] Starting server on port 8080 …
[2020-08-10 10:06:52.544] [INFO] You’re using a full whitelist configuration to allow for all IPs
[2020-08-10 10:06:52.556] [LOG] Server started …
[2020-08-10 10:06:52.557] [LOG] Connecting socket for: updatenotification
[2020-08-10 10:06:52.559] [LOG] Connecting socket for: MMM-AlexaControl
[2020-08-10 10:06:52.560] [LOG] MMM-AlexaControl helper, started…
[2020-08-10 10:06:52.561] [LOG] Connecting socket for: MMM-OnScreenMenu
[2020-08-10 10:06:52.562] [LOG] Sockets connected & modules started …
[2020-08-10 10:06:52.751] [LOG] Launching application.
[2020-08-10 10:06:55.681] [LOG] monitorToggle requested
[2020-08-10 10:06:55.694] [LOG] Adding multicast membership for 127.0.0.1
[2020-08-10 10:06:55.695] [LOG] Adding multicast membership for 10.0.0.2
[2020-08-10 10:06:55.697] [LOG] server is listening on 11000
[2020-08-10 10:06:55.700] [LOG] server is listening on 11001
[2020-08-10 10:06:55.701] [LOG] server is listening on 11002
[2020-08-10 10:06:55.702] [LOG] server is listening on 11005
[2020-08-10 10:06:55.741] [INFO] Checking git for module: MMM-AlexaControl
[2020-08-10 10:06:55.816] [INFO] Checking git for module: MMM-OnScreenMenu
[2020-08-10 10:07:02.910] [LOG] Shutting down server…
[2020-08-10 10:07:02.911] [LOG] Stopping module helper: updatenotification
[2020-08-10 10:07:02.912] [LOG] Stopping module helper: MMM-AlexaControl
[2020-08-10 10:07:02.913] [LOG] Stopping module helper: MMM-OnScreenMenuHere is the config.js :
{ module: "clock", position: "top_left", config: { // The config property is optional. // See 'Configuration options' for more information. displaySeconds: false } }, { module: "updatenotification", position: "top_bar" }, /*{ module: "compliments", position: "lower_third" },*/ { module: "currentweather", position: "top_right", config: { location: "New York", locationID: "xxxxxx", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "xxxxxxxxxxxxxxxxxxxxxx", showWindDirectionAsArrow: true, showHumidity: true, useKMPHwind: true } }, { module: "weatherforecast", position: "top_right", header: "Weather Forecast", config: { location: "New York", locationID: "xxxxx", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "xxxxxxxxxxxxxxxxxxxxxxxxx", showRainAmount: true } }, { module: 'MMM-AlexaControl', position: 'middle_center', config:{ image: true, pm2ProcessName: "mm", vcgencmd: true, height: "100", width: "100", deviceName: "Spiegel" } }, { module: "MMM-Spotify", disabled: true, position: "bottom_left", // "bottom_bar" or "top_bar" for miniBar config: { debug: false, // debug mode style: "default", // "default" or "mini" available (inactive for miniBar) control: "default", accountDefault: 0, // default account number, attention : 0 is the first account updateInterval: 1000, // update interval when playing idleInterval: 2000, // update interval on idle onStart: null, // disable onStart feature with `null` deviceDisplay: "Listening on", // text to display in the device block (default style only) allowDevices: [], //If you want to limit devices to display info, use this. // allowDevices: ["RASPOTIFY", "My iPhoneX", "My Home speaker"], miniBarConfig: { album: true, // display Album name in miniBar style scroll: true, // scroll title / artist / album in miniBar style logo: true, // display Spotify logo in miniBar style } } }, { module: 'MMM-OnScreenMenu', position: 'bottom_right', /* Valid positions: 'top_right', 'top_left', 'bottom_right', 'bottom_left' */ config: { touchMode: true, enableKeyboard: true, // ... see more options below } },how can you enter commands while the mirror is running?
they are all in the same wifi because i disabled 5Ghz.
the sudo netstat -a -p | grep 1900 shows nothing while the mirror isnt running.
i allowed all ipś and tried it with that page indicator and page module.
does it normal work as standalone or do i need more modules? -
maybe i have to update something?
but how do i update magicmirror, the modules, etc.??
should the extra line of debug code end with nothing or a , or a ; ?
i added the debugging now (with nothing at the end of that extra line) and it shows this:magicmirror@2.12.0 start /home/pi/MagicMirror
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js[2020-08-10 10:56:52.494] [LOG] Starting MagicMirror: v2.12.0
[2020-08-10 10:56:52.507] [LOG] Loading config …
[2020-08-10 10:56:52.517] [LOG] Loading module helpers …
[2020-08-10 10:56:52.521] [LOG] No helper found for module: clock.
[2020-08-10 10:56:52.619] [LOG] Initializing new module helper …
[2020-08-10 10:56:52.620] [LOG] Module helper loaded: updatenotification
[2020-08-10 10:56:52.621] [LOG] No helper found for module: currentweather.
[2020-08-10 10:56:52.622] [LOG] No helper found for module: weatherforecast.
[2020-08-10 10:56:53.215] [LOG] Initializing new module helper …
[2020-08-10 10:56:53.216] [LOG] Module helper loaded: MMM-AlexaControl
[2020-08-10 10:56:53.219] [LOG] Initializing new module helper …
[2020-08-10 10:56:53.220] [LOG] Module helper loaded: MMM-OnScreenMenu
[2020-08-10 10:56:53.221] [LOG] All module helpers loaded.
[2020-08-10 10:56:53.455] [LOG] Starting server on port 8080 …
[2020-08-10 10:56:53.467] [INFO] You’re using a full whitelist configuration to allow for all IPs
[2020-08-10 10:56:53.481] [LOG] Server started …
[2020-08-10 10:56:53.483] [LOG] Connecting socket for: updatenotification
[2020-08-10 10:56:53.485] [LOG] Connecting socket for: MMM-AlexaControl
[2020-08-10 10:56:53.487] [LOG] MMM-AlexaControl helper, started…
[2020-08-10 10:56:53.489] [LOG] Connecting socket for: MMM-OnScreenMenu
[2020-08-10 10:56:53.490] [LOG] Sockets connected & modules started …
[2020-08-10 10:56:53.677] [LOG] Launching application.
[2020-08-10 10:56:56.641] [LOG] monitorToggle requested
[2020-08-10 10:56:56.662] [LOG] Adding multicast membership for 127.0.0.1
[2020-08-10 10:56:56.673] [LOG] Adding multicast membership for 10.0.0.2
[2020-08-10 10:56:56.677] [LOG] server is listening on 11000
[2020-08-10 10:56:56.681] [LOG] server is listening on 11001
[2020-08-10 10:56:56.684] [LOG] server is listening on 11002
[2020-08-10 10:56:56.687] [LOG] server is listening on 11005
[2020-08-10 10:56:56.794] [INFO] Checking git for module: MMM-AlexaControl
[2020-08-10 10:56:56.842] [INFO] Checking git for module: MMM-OnScreenMenu
[2020-08-10 10:57:17.037] [ERROR] fatal: unable to access ‘https://github.com/shbatm/MMM-OnScreenMenu/’: Could not resolve host: github.com[2020-08-10 10:57:17.062] [ERROR] fatal: unable to access ‘https://github.com/JoChef2/MMM-AlexaControl.git/’: Could not resolve host: github.com
[2020-08-10 10:57:17.088] [ERROR] fatal: unable to access ‘https://github.com/MichMich/MagicMirror/’: Could not resolve host: github.com
[2020-08-10 10:57:24.385] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
MAN: “ssdp:discover”
MX: 1
ST: urn:dial-multiscreen-org:service:dial:1
USER-AGENT: Chromium/78.0.3904.108 Linuxfrom 10.0.0.2:48010
[2020-08-10 10:57:24.401] [LOG] Search request from { address: ‘10.0.0.2’, family: ‘IPv4’, port: 48010, size: 167 }
[2020-08-10 10:57:24.444] [LOG] 10.0.0.0
[2020-08-10 10:57:24.460] [LOG] responding for port=11000
[2020-08-10 10:57:24.473] [LOG] responding for port=11001
[2020-08-10 10:57:24.476] [LOG] responding for port=11002
[2020-08-10 10:57:24.478] [LOG] responding for port=11005
[2020-08-10 10:57:25.389] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
MAN: “ssdp:discover”
MX: 1
ST: urn:dial-multiscreen-org:service:dial:1
USER-AGENT: Chromium/78.0.3904.108 Linuxfrom 10.0.0.2:48010
[2020-08-10 10:57:25.393] [LOG] Search request from { address: ‘10.0.0.2’, family: ‘IPv4’, port: 48010, size: 167 }
[2020-08-10 10:57:25.396] [LOG] 10.0.0.0
[2020-08-10 10:57:25.405] [LOG] responding for port=11000
[2020-08-10 10:57:25.409] [LOG] responding for port=11001
[2020-08-10 10:57:25.412] [LOG] responding for port=11002
[2020-08-10 10:57:25.414] [LOG] responding for port=11005
[2020-08-10 10:57:26.390] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
MAN: “ssdp:discover”
MX: 1
ST: urn:dial-multiscreen-org:service:dial:1
USER-AGENT: Chromium/78.0.3904.108 Linuxfrom 10.0.0.2:48010
[2020-08-10 10:57:26.391] [LOG] Search request from { address: ‘10.0.0.2’, family: ‘IPv4’, port: 48010, size: 167 }
[2020-08-10 10:57:26.394] [LOG] 10.0.0.0
[2020-08-10 10:57:26.400] [LOG] responding for port=11000
[2020-08-10 10:57:26.402] [LOG] responding for port=11001
[2020-08-10 10:57:26.404] [LOG] responding for port=11002
[2020-08-10 10:57:26.407] [LOG] responding for port=11005
[2020-08-10 10:57:27.391] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
MAN: “ssdp:discover”
MX: 1
ST: urn:dial-multiscreen-org:service:dial:1
USER-AGENT: Chromium/78.0.3904.108 Linuxfrom 10.0.0.2:48010
[2020-08-10 10:57:27.392] [LOG] Search request from { address: ‘10.0.0.2’, family: ‘IPv4’, port: 48010, size: 167 }
[2020-08-10 10:57:27.394] [LOG] 10.0.0.0
[2020-08-10 10:57:27.400] [LOG] responding for port=11000
[2020-08-10 10:57:27.403] [LOG] responding for port=11001
[2020-08-10 10:57:27.405] [LOG] responding for port=11002
[2020-08-10 10:57:27.407] [LOG] responding for port=11005
[2020-08-10 10:59:06.529] [LOG] Shutting down server…
[2020-08-10 10:59:06.531] [LOG] Stopping module helper: updatenotification
[2020-08-10 10:59:06.533] [LOG] Stopping module helper: MMM-AlexaControl
[2020-08-10 10:59:06.535] [LOG] Stopping module helper: MMM-OnScreenMenu -
@sdetweil
Do you need anything else from the config.js file? -
@Michael-Schw one of those discovery cycles should have returned new devices found
if you use Alexa phone app to look at devices, are they there? monitor, shutdown, restart?
Alexa echo devices only connect at 2.4ghz, so I don’t know what happens if a device I 5ghz only. will it get the ssdp query?
-
i redid my discovery and notice this
[2020-08-10 10:25:05.522] [LOG] << server got: M-SEARCH * HTTP/1.1 HOST: 239.255.255.250:1900 MAN: "ssdp:discover" MX: 15 ST: urn:Belkin:device:** from 192.168.2.244:50000 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:93 Socket.<anonymous>) [2020-08-10 10:25:05.523] [LOG] Search request from { address: '192.168.2.244', family: 'IPv4', port: 50000, size: 107 } (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:94 Socket.<anonymous>) [2020-08-10 10:25:05.524] [LOG] 192.168.2.0 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:95 Socket.<anonymous>) [2020-08-10 10:25:05.525] [LOG] responding for port=16000 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) [2020-08-10 10:25:05.526] [LOG] responding for port=16001 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) [2020-08-10 10:25:05.527] [LOG] responding for port=16002 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) [2020-08-10 10:25:05.528] [LOG] responding for port=16003 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) [2020-08-10 10:25:05.528] [LOG] responding for port=16004 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) [2020-08-10 10:25:05.529] [LOG] responding for port=16005 (/home/sam/MagicMirror.2.11/modules/MMM-AlexaControl/node_modules/node-fauxmo/src/SSDPService.js:18 response) -
@sdetweil i did try to find it on my phone…and it worked but it cant do a thing.
i found : restart Spiegel pm2
spiegel refresh
Spiegel Monitor
stop Spiegel pm2which one does what?
and can i speak german to alexa and can rename these names?
everytime i tried Spiegel Monitor, what i believe is the toggle function it says:please configure the option vcgencmd.
so do i have to put in this option vcgencmd instead of true?
this is all i got:magicmirror@2.12.0 start /home/pi/MagicMirror
DISPLAY=“${DISPLAY:=:0}” ./node_modules/.bin/electron js/electron.js
[2020-08-10 17:26:01.656] [LOG] Starting MagicMirror: v2.12.0
[2020-08-10 17:26:01.702] [LOG] Loading config …
[2020-08-10 17:26:01.725] [LOG] Loading module helpers …
[2020-08-10 17:26:01.729] [LOG] No helper found for module: clock.
[2020-08-10 17:26:01.859] [LOG] Initializing new module helper …
[2020-08-10 17:26:01.861] [LOG] Module helper loaded: updatenotification
[2020-08-10 17:26:01.863] [LOG] No helper found for module: currentweather.
[2020-08-10 17:26:01.865] [LOG] No helper found for module: weatherforecast.
[2020-08-10 17:26:02.802] [LOG] Initializing new module helper …
[2020-08-10 17:26:02.803] [LOG] Module helper loaded: MMM-AlexaControl
[2020-08-10 17:26:02.810] [LOG] Initializing new module helper …
[2020-08-10 17:26:02.811] [LOG] Module helper loaded: MMM-OnScreenMenu
[2020-08-10 17:26:02.812] [LOG] All module helpers loaded.
[2020-08-10 17:26:03.178] [LOG] Starting server on port 8080 …
[2020-08-10 17:26:03.207] [INFO] You’re using a full whitelist configuration to allow for all IPs
[2020-08-10 17:26:03.222] [LOG] Server started …
[2020-08-10 17:26:03.224] [LOG] Connecting socket for: updatenotification
[2020-08-10 17:26:03.226] [LOG] Connecting socket for: MMM-AlexaControl
[2020-08-10 17:26:03.227] [LOG] MMM-AlexaControl helper, started…
[2020-08-10 17:26:03.229] [LOG] Connecting socket for: MMM-OnScreenMenu
[2020-08-10 17:26:03.230] [LOG] Sockets connected & modules started …
[2020-08-10 17:26:03.806] [LOG] Launching application.
[2020-08-10 17:26:07.569] [LOG] monitorToggle requested
[2020-08-10 17:26:07.593] [LOG] Adding multicast membership for 127.0.0.1
[2020-08-10 17:26:07.595] [LOG] Adding multicast membership for 10.0.0.2
[2020-08-10 17:26:07.598] [LOG] server is listening on 11000
[2020-08-10 17:26:07.600] [LOG] server is listening on 11001
[2020-08-10 17:26:07.602] [LOG] server is listening on 11002
[2020-08-10 17:26:07.603] [LOG] server is listening on 11005
[2020-08-10 17:26:07.738] [INFO] Checking git for module: MMM-AlexaControl
[2020-08-10 17:26:07.787] [INFO] Checking git for module: MMM-OnScreenMenu
[2020-08-10 17:26:50.497] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.513] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.563] [LOG] 10.0.0.0
[2020-08-10 17:26:50.572] [LOG] responding for port=11000
[2020-08-10 17:26:50.586] [LOG] responding for port=11001
[2020-08-10 17:26:50.589] [LOG] responding for port=11002
[2020-08-10 17:26:50.591] [LOG] responding for port=11005
[2020-08-10 17:26:50.597] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.599] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.600] [LOG] 10.0.0.0
[2020-08-10 17:26:50.605] [LOG] responding for port=11000
[2020-08-10 17:26:50.607] [LOG] responding for port=11001
[2020-08-10 17:26:50.608] [LOG] responding for port=11002
[2020-08-10 17:26:50.610] [LOG] responding for port=11005
[2020-08-10 17:26:50.614] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.615] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.618] [LOG] 10.0.0.0
[2020-08-10 17:26:50.624] [LOG] responding for port=11000
[2020-08-10 17:26:50.627] [LOG] responding for port=11001
[2020-08-10 17:26:50.628] [LOG] responding for port=11002
[2020-08-10 17:26:50.631] [LOG] responding for port=11005
[2020-08-10 17:26:50.634] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.636] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.638] [LOG] 10.0.0.0
[2020-08-10 17:26:50.644] [LOG] responding for port=11000
[2020-08-10 17:26:50.646] [LOG] responding for port=11001
[2020-08-10 17:26:50.647] [LOG] responding for port=11002
[2020-08-10 17:26:50.649] [LOG] responding for port=11005
[2020-08-10 17:26:50.652] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.653] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.654] [LOG] 10.0.0.0
[2020-08-10 17:26:50.657] [LOG] responding for port=11000
[2020-08-10 17:26:50.659] [LOG] responding for port=11001
[2020-08-10 17:26:50.660] [LOG] responding for port=11002
[2020-08-10 17:26:50.661] [LOG] responding for port=11005
[2020-08-10 17:26:50.663] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.7:50000
[2020-08-10 17:26:50.664] [LOG] Search request from { address: ‘10.0.0.7’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.665] [LOG] 10.0.0.0
[2020-08-10 17:26:50.668] [LOG] responding for port=11000
[2020-08-10 17:26:50.670] [LOG] responding for port=11001
[2020-08-10 17:26:50.672] [LOG] responding for port=11002
[2020-08-10 17:26:50.674] [LOG] responding for port=11005
[2020-08-10 17:26:50.680] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.682] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.683] [LOG] 10.0.0.0
[2020-08-10 17:26:50.686] [LOG] responding for port=11000
[2020-08-10 17:26:50.688] [LOG] responding for port=11001
[2020-08-10 17:26:50.689] [LOG] responding for port=11002
[2020-08-10 17:26:50.690] [LOG] responding for port=11005
[2020-08-10 17:26:50.692] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.693] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.694] [LOG] 10.0.0.0
[2020-08-10 17:26:50.697] [LOG] responding for port=11000
[2020-08-10 17:26:50.699] [LOG] responding for port=11001
[2020-08-10 17:26:50.700] [LOG] responding for port=11002
[2020-08-10 17:26:50.701] [LOG] responding for port=11005
[2020-08-10 17:26:50.704] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.705] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.708] [LOG] 10.0.0.0
[2020-08-10 17:26:50.713] [LOG] responding for port=11000
[2020-08-10 17:26:50.715] [LOG] responding for port=11001
[2020-08-10 17:26:50.716] [LOG] responding for port=11002
[2020-08-10 17:26:50.717] [LOG] responding for port=11005
[2020-08-10 17:26:50.719] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.720] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.721] [LOG] 10.0.0.0
[2020-08-10 17:26:50.724] [LOG] responding for port=11000
[2020-08-10 17:26:50.726] [LOG] responding for port=11001
[2020-08-10 17:26:50.727] [LOG] responding for port=11002
[2020-08-10 17:26:50.728] [LOG] responding for port=11005
[2020-08-10 17:26:50.730] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: ssdp:all
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.731] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.732] [LOG] 10.0.0.0
[2020-08-10 17:26:50.735] [LOG] responding for port=11000
[2020-08-10 17:26:50.737] [LOG] responding for port=11001
[2020-08-10 17:26:50.738] [LOG] responding for port=11002
[2020-08-10 17:26:50.740] [LOG] responding for port=11005
[2020-08-10 17:26:50.744] [LOG] << server got: M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
ST: upnp:rootdevice
MAN: “ssdp:discover”
MX: 3from 10.0.0.5:50000
[2020-08-10 17:26:50.745] [LOG] Search request from { address: ‘10.0.0.5’, family: ‘IPv4’, port: 50000, size: 1024 }
[2020-08-10 17:26:50.747] [LOG] 10.0.0.0
[2020-08-10 17:26:50.751] [LOG] responding for port=11000
[2020-08-10 17:26:50.753] [LOG] responding for port=11001
[2020-08-10 17:26:50.754] [LOG] responding for port=11002
[2020-08-10 17:26:50.755] [LOG] responding for port=11005
[2020-08-10 17:29:59.025] [LOG] Please configure the option vcgencmd
[2020-08-10 17:31:37.427] [LOG] Please configure the option vcgencmd
[2020-08-10 17:31:42.434] [LOG] Please configure the option vcgencmd
[2020-08-10 17:32:02.023] [LOG] Stopping PM2 process: mm
[2020-08-10 17:32:02.080] [LOG] Error: process or namespace not found
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2/lib/API.js:1538:28
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2/lib/Client.js:734:12
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2-axon-rpc/lib/client.js:45:10
at Parser. (/home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2-axon/lib/sockets/req.js:67:8)
at Parser.emit (events.js:200:13)
at Parser._write (/home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/amp/lib/stream.js:91:16)
at doWrite (_stream_writable.js:417:12)
at writeOrBuffer (_stream_writable.js:401:5)
at Parser.Writable.write (_stream_writable.js:301:11)
at Socket.ondata (_stream_readable.js:713:22)
[2020-08-10 17:32:11.797] [LOG] Stopping PM2 process: mm
[2020-08-10 17:32:11.831] [LOG] Error: process or namespace not found
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2/lib/API.js:1538:28
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2/lib/Client.js:734:12
at /home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2-axon-rpc/lib/client.js:45:10
at Parser. (/home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/pm2-axon/lib/sockets/req.js:67:8)
at Parser.emit (events.js:200:13)
at Parser._write (/home/pi/MagicMirror/modules/MMM-AlexaControl/node_modules/amp/lib/stream.js:91:16)
at doWrite (_stream_writable.js:417:12)
at writeOrBuffer (_stream_writable.js:401:5)
at Parser.Writable.write (_stream_writable.js:301:11)
at Socket.ondata (_stream_readable.js:713:22)
[2020-08-10 17:32:31.117] [LOG] Shutting down server…
[2020-08-10 17:32:31.119] [LOG] Stopping module helper: updatenotification
[2020-08-10 17:32:31.120] [LOG] Stopping module helper: MMM-AlexaControl
[2020-08-10 17:32:31.121] [LOG] Stopping module helper: MMM-OnScreenMenu -
@Michael-Schw said in MMM-AlexaControl or MMM-AlexaOn/Off setup:
restart Spiegel pm2
spiegel refresh
Spiegel Monitor
stop Spiegel pm2these names are device names.
remember these are plugs, so the command is alex turn on (device name) , or alexa turn off (device name)
there is a file in the translations directory for changing the device names… and language
mine looks like
{ "PAGE": "page ", "REFRESH": "refresh mirror", "RESTART": "restart mirror", "STOP": "stop mirror", "REBOOT": "reboot mirror", "SHUTDOWN": "shutdown mirror", "MONITOR": "mirror" }my extension to this was to put the name between any 2 words
reboot mirror = reboot [name] mirrormy mirrors are named,
office, hall, desk, desktop, catalina, nanoI changed Monitor to Mirror
(and also provided deviceName:??? in config)so I can say
alexa turn off hall mirror
U would say (unless u change the translations file, and redo disocvery, I think u have to delete the devices to get new name used)
alexa turn off spiegel monitoralexa turn on spiegel refresh
some of the verbiage is hard, but best u can do with on/off switches
-
@Michael-Schw said in MMM-AlexaControl or MMM-AlexaOn/Off setup:
[2020-08-10 17:29:59.025] [LOG] Please configure the option vcgencmd
[2020-08-10 17:31:37.427] [LOG] Please configure the option vcgencmd
[2020-08-10 17:31:42.434] [LOG] Please configure the option vcgencmd
[2020-08-10 17:32:02.023] [LOG] Stopping PM2 process: mmdo pm2 status
the name there is the name of the pm2ProcessName: config optionmy config , on mirror system ‘desk’
{ module: "MMM-AlexaControl", disabled: false, position: "bottom_left", config: { deviceName: "desk", image: false, pm2ProcessName: "MagicMirror", vcgencmd: "hide", monitorToggle: true, startPort: 16000, reboot: true, shutdown: true, stop: true, }, },
