MMM-Carousel not displaying

[mumblebaj]

@pastormingle said in MMM-Carousel not displaying:

MMM-Carousel

Just a silly question, when you installed the module. did you go into the MMM-Carousel folder and ran npm install?

[sdetweil]

@pastormingle @mumblebaj also see position here

https://docs.magicmirror.builders/modules/configuration.html

[pastormingle]

@mumblebaj said in MMM-Carousel not displaying:

npm install

not a silly question as it’s not in the install readme file…

Installation

Run these commands at the root of your magic mirror install.

cd modules
git clone https://github.com/shbatm/MMM-Carousel

Using the module

To use this module, add the following configuration block to the modules array in the config/config.js file:

[sdetweil]

@pastormingle doesn’t have a node helper, so doesn’t need an npm install

[mumblebaj]

@pastormingle Yes, you have to run nom install in the module folder. I saw that the module has a package.json with dependencies. I just installed it on my machine and it works. One thing to note, it only rotates modules that occupying the same position on the mirror. I have 2 modules that occupy the top_right position and those are rotating and the others remain unchanged when using the global config option.

[mumblebaj]

@sdetweil Hi Sam, For my understanding. What about dependencies in the package.json? If those are not default with MM then you have to run npm install I would think? Or is my understanding incorrect?

[pastormingle]

@mumblebaj do you have an example of your config?

[pastormingle]

@pastormingle I sent my weather module to use the same as the clock position but still nothing…

[mumblebaj]

@pastormingle I used one of the default.

            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: [],
                mode: 'positional',
                top_left: {enabled: true, ignoreModules: [], overrideTransitionInterval: 15000},
                top_right: {enabled: true, ignoreModules: ['currentweather']}
            }
        },

Just tested the Global option and it works fine and rotates all the modules one by one.
Here is the config for global

            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: ['clock'],
                mode: 'global'
            }
        }

[pastormingle]

@mumblebaj hum… this is my config…

/•
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/getting-started/configuration.html#general
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weather",
			position: "top_left",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
        {
            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: [],
                mode: 'global'
            }
        }
 	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}