Magic Mirror logo appears at Boot and then the Raspberry desktop

[sdetweil]

@Syosse can you do

cat  ~/MagicMirror/installers/pm2_MagicMirror.json

thx

[sdetweil]

@Syosse can u also paste the contents of

~/MagicMirror/installers/pm2_setup.log

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse can u also paste the contents of

~/MagicMirror/installers/pm2_setup.log

yea of course:

Thanks so much!

[sdetweil]

@Syosse ok, try this then

cat  ~/MagicMirror/installers/pm2_MagicMirror_new.json

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse ok, try this then

cat  ~/MagicMirror/installers/pm2_MagicMirror_new.json

thanks so much!

[sdetweil]

@Syosse and then if you do

pm2 start  ~/MagicMirror/installers/pm2_MagicMirror_new.json

if it works, then
pm2 save
then
sudo reboot

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse and then if you do

pm2 start  ~/MagicMirror/installers/pm2_MagicMirror_new.json

if it works, then
pm2 save
then
sudo reboot

Omg it works!!

Oh man, what was the problem?

Thanks soo much !!!

[sdetweil]

@Syosse said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

Oh man, what was the problem?

the pm2 startup generated command fails when in a script suddenly

but it works when done manually…

I have issue open since May
https://github.com/Unitech/pm2/issues/5582

[Syosse]

@sdetweil said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

@Syosse said in Magic Mirror logo appears at Boot and then the Raspberry desktop:

Oh man, what was the problem?

the pm2 startup generated command fails when in a script suddenly

but it works when done manually…

I have issue open since May
https://github.com/Unitech/pm2/issues/5582

thanks man , unfortunately there is still a problem as soon as I enter the following commands it works and magic mirror starts but after reboot the desktop comes back

with this command Magic Mirror starts

pm2 start  ~/MagicMirror/installers/pm2_MagicMirror_new.json

after this command it still works

pm2 save

and after this reboot command the raspberry pi restarts and it shows the desktop instead Magic Mirror.

 sudo reboot

thanks so much

[sdetweil]

@Syosse did you execute the command output from first

pm2 startup