Module Region question

sdetweil

@greedyvegan you can also try my MMM-Config module if you want to avoid the editing troubles of config.js

greedyvegan

address:“0.0.0.0”, // means listen on all adapters, wifi and ethernet if both enabled, WITHOUT having to specify the ACTUAL ip address
port: 8080 // default so you would use your PC browser to connect to the ip address/name of the machine running mm:port number
http://ip_address_or_name:port ipwhitelist:[] // provides a way to allow ONLY specific addresses, ON YOUR NETWORK, to connect to mm.

I’ve tried ipWhitelist “[]” and “[my ipaddress]” and nothing,
but I’m going to try again

to access disk and have ssh,use bitwise or winscp clients from your PC. will give use ssh window and file manager type access to files on pi

I’m going to give this a shot

on the restart on change, pm2 seems flaky there.
but I have only configured to watch config.js
to refresh w css just refresh the MM page.
ctrl-r on the MM content, f5 on the dev window content
you can do all the developers window from any pc that can get the MM screen

I’ve been refreshing or closing the MM window

you can also try my MMM-Config module if you want yo avoid the editing troubles of config.js https://github.com/sdetweil/MMM-Config

I’m going to try that now
thanks a lot.

sdetweil

@greedyvegan it’s

address:'0.0.0.0',
ipWhitelist:[]

either single or double quotes

then you can access from your phone or pc

http://pi_ipaddress:8080

my pi is called raspberrypi4
so

http://raspberrypi4:8080

greedyvegan

@sdetweil

the ip address didn’t work, the name worked this time,
I put the whitelist under address like in your example

thank you very much

sdetweil

@greedyvegan the mm server ip address would be something like

192.168.1.???
if you do ping your name it should return the server address

greedyvegan

@sdetweil I copied it the way you had in another post and it wasn’t working, it’s finally working now.

thank you again!