ShellyPV mit Shelly 2.5

chrisfr1976

@visionmaster Hi, werde es mir morgen anschauen. Danke für die Infos.

chrisfr1976

Hi,

please replace the node_helper.js in the module MMM-ShellyPV with the following code. If you receive an error, please describe what you see or what error messages you get. Since I do not have such a device yet it is not possible for me to test it.

At first I start with the Shelly 2.5 device. The “shellyrgbw2” is then the next step!

The config must be like this for these specific 2.5 devices:

shellysPV: [
    { name: "Kueche 1", id: "dcda0cb93bb8", ch: "1" }, // Channel 1 (relay[0])
    { name: "Kueche 2", id: "dcda0cb93bb8", ch: "2" }  // Channel 2 (relay[1])
]

I’ve used 1 and 2 instead of 0 and 1. It is easier for my head :-)

And next the updated node_helper.js file:

const NodeHelper = require("node_helper");
const axios = require("axios");

module.exports = NodeHelper.create({
    start: function () {
        this.config = {};

        setTimeout(() => {
            console.log("MagicMirror is ready. Fetching ShellyPV status...");
            this.fetchShellyPVStatus();
        }, 15000); // Delay to ensure MagicMirror is fully loaded
    },

    socketNotificationReceived: function (notification, payload) {
        if (notification === "CONFIG") {
            this.config = payload;

            if (this.config.shellysPV && Array.isArray(this.config.shellysPV)) {
                console.log("Configuration received, fetching ShellyPV status...");
                this.fetchShellyPVStatus();
            }
        } else if (notification === "GET_SHELLYPV_STATUS") {
            this.fetchShellyPVStatus();
        }
    },

    fetchShellyPVStatus: async function () {
        const results = [];

        if (!this.config.shellysPV || !Array.isArray(this.config.shellysPV)) {
            console.error("No valid shellysPV configuration found or 'shellysPV' is not an array.");
            return;
        }

        for (const shellyPV of this.config.shellysPV) {
            try {
                const response = await axios.post(
                    `${this.config.serverUri}/device/status`,
                    `id=${shellyPV.id}&auth_key=${this.config.authKey}`
                );

                const data = response.data?.data?.device_status;

                if (data) {
                    let isOn = false;
                    let power = null;

                    // Handle multi-channel devices
                    if (data.relays && shellyPV.ch) {
                        const channelIndex = parseInt(shellyPV.ch, 10) - 1; // Convert to zero-based index
                        if (channelIndex >= 0 && channelIndex < data.relays.length) {
                            const relay = data.relays[channelIndex];
                            const meter = data.meters?.[channelIndex];

                            isOn = relay.ison;
                            power = meter?.power || 0;
                        } else {
                            console.error(`Invalid channel index for ${shellyPV.name}: ${shellyPV.ch}`);
                        }
                    }
                    // Handle single-channel devices (or default behavior for Gen 1/2)
                    else if (data.relays) {
                        isOn = data.relays[0].ison;
                        power = data.meters ? data.meters[0].power : null;
                    }
                    // Handle Gen 3 devices (pm1:0 structure)
                    else if (data["pm1:0"]) {
                        isOn = true; // Assume true if data exists
                        power = data["pm1:0"].apower;
                    }
                    // Handle switch:0 structure
                    else if (data["switch:0"]) {
                        isOn = data["switch:0"].output;
                        power = data["switch:0"].apower;
                    }

                    results.push({
                        name: shellyPV.name,
                        isOn: isOn,
                        power: power !== undefined ? power : null,
                        statusClass: isOn ? 'on' : 'off', // Dynamically set status class
                    });
                } else {
                    results.push({
                        name: shellyPV.name,
                        isOn: false,
                        power: null,
                        statusClass: 'off', // Default to off if no data found
                    });
                }
            } catch (error) {
                console.error(`Error fetching status for ${shellyPV.name}:`, error);
                results.push({
                    name: shellyPV.name,
                    isOn: false,
                    power: null,
                    statusClass: 'off', // Default to off on error
                });
            }
        }

        this.sendSocketNotification("SHELLYPV_STATUS_UPDATE", results);
    },
});

For devices without a ch parameter, the logic defaults to using the first relay and meter (relays[0], meters[0]), ensuring compatibility with single-channel or older devices.
If a ch parameter is specified in the config, the code now accesses the corresponding relays and meters arrays for the specific channel.

visionmaster

@chrisfr1976
Hi und Danke !!!
Das neue Script funktioniert einwandfrei.
Ich hatte allerdings vergessen zu erwähnen, daß ich das ShellyStatusTable benutze und nicht das ShellyPV.
Daher ging es erst nicht. Nachdem ich aber alle PV entfernt habe, ging es sofort. Tausend Dank… Über die Abfrage der ShellyRGBW würde ich mich aber auch sehr freuen :)

chrisfr1976

@visionmaster
Perfekt. Freut mich! Morgen probiere mich an der RGB Shelly. Kann es aber noch nicht versprechen. Wenn das läuft aktualisiere ich die Module für Table und PV bei Github.

chrisfr1976

@visionmaster
Vielleicht einfacher als gedacht. Wieder als node_helper.js übernehmen:

const NodeHelper = require("node_helper");
const axios = require("axios");

module.exports = NodeHelper.create({
    start: function () {
        this.config = {};

        setTimeout(() => {
            console.log("MagicMirror is ready. Fetching ShellyPV status...");
            this.fetchShellyPVStatus();
        }, 15000); // Delay to ensure MagicMirror is fully loaded
    },

    socketNotificationReceived: function (notification, payload) {
        if (notification === "CONFIG") {
            this.config = payload;

            if (this.config.shellysPV && Array.isArray(this.config.shellysPV)) {
                console.log("Configuration received, fetching ShellyPV status...");
                this.fetchShellyPVStatus();
            }
        } else if (notification === "GET_SHELLYPV_STATUS") {
            this.fetchShellyPVStatus();
        }
    },

    fetchShellyPVStatus: async function () {
        const results = [];

        if (!this.config.shellysPV || !Array.isArray(this.config.shellysPV)) {
            console.error("No valid shellysPV configuration found or 'shellysPV' is not an array.");
            return;
        }

        for (const shellyPV of this.config.shellysPV) {
            try {
                const response = await axios.post(
                    `${this.config.serverUri}/device/status`,
                    `id=${shellyPV.id}&auth_key=${this.config.authKey}`
                );

                const data = response.data?.data?.device_status;

                if (data) {
                    let isOn = false;
                    let power = null;

                    // Check for Gen 1/2 structure (relay-based devices)
                    if (data.relays) {
                        const channel = parseInt(shellyPV.ch || 0, 10);
                        isOn = data.relays[channel]?.ison || false;
                        power = data.meters?.[channel]?.power || null;
                    }
                    // Check for Gen 3 structure (pm1:0 devices)
                    else if (data["pm1:0"]) {
                        isOn = true; // Assume true if data exists for the device
                        power = data["pm1:0"].apower; // Use 'apower' from pm1:0
                    }
                    // Check for "switch:0" structure
                    else if (data["switch:0"]) {
                        isOn = data["switch:0"].output; // Use 'output' for on/off status
                        power = data["switch:0"].apower; // Use 'apower' for power
                    }
                    // Check for RGB Shelly structure (lights array)
                    else if (data.lights) {
                        const light = data.lights[0]; // Assume single channel for RGB device
                        isOn = light?.ison || false;
                        power = light?.power || null;
                    }

                    results.push({
                        name: shellyPV.name,
                        isOn: isOn,
                        power: power !== undefined ? power : null,
                        statusClass: isOn ? 'on' : 'off', // Dynamically set status class
                    });
                } else {
                    results.push({
                        name: shellyPV.name,
                        isOn: false,
                        power: null,
                        statusClass: 'off', // Default to off if no data found
                    });
                }
            } catch (error) {
                console.error(`Error fetching status for ${shellyPV.name}:`, error);
                results.push({
                    name: shellyPV.name,
                    isOn: false,
                    power: null,
                    statusClass: 'off', // Default to off on error
                });
            }
        }

        this.sendSocketNotification("SHELLYPV_STATUS_UPDATE", results);
    },
});

In der config wieder wie üblich einrichten.

visionmaster

@chrisfr1976
Hi und wiedermal Danke.
Funktioiert fast :)
Status On/Off funktioniert
Power teilweise. Wenn Status an: korrekt Anzeige. Wenn Status Off: Anzeige > N/A. Manchmal bleibt sogar die Poweranzeige auf den letzten Wert, obwohl die Shelly ausgeschaltet ist.

"lights":[{"ison":true,"source":"http","has_timer":false,"timer_started":0,"timer_duration":0,"timer_remaining":0,"mode":"color","red":0,"green":0,"blue":255,"white":0,"gain":79,"effect":0,"transition":0,"power":3.59,"overpower":false,"brightness":79}]

visionmaster

@visionmaster
Hier zur Info:

Ich habe :

else if (data.lights) {
const light = data.lights[0]; // Assume single channel for RGB device
isOn = light?.ison || false;
power = light?.power || null;
}

durch:

else if (data.lights) {
const light = data.lights[0]; // Assume single channel for RGB device
isOn = light?.ison || false;
power = data.meters ? data.meters[0].power : null;
}

ersetzt. Jetzt zeigt er alles richtig an. :)

chrisfr1976

@visionmaster Danke für die Antwort. Die Module sind in GitHub aktualisiert.

So, issue closed until new devices pop up ;-)