MMM-MyHomeWizard

htilburgs

@vansman
Did it work?

vansman

@htilburgs Progress! When i remove the line (IP adress) of the watermeter i see the data of the P1 meter.
It looks like Homewizard create its own network in the 192.168.101.-- range. I also have an KWH1 meter wich also has an 192.168.101 adress. What i don’t understand how MagicMirror connects to the other ip network?
And if i get the watermeter to work, is it also easy to add de KW1 meter also?

vansman

@htilburgs I think i found my problem. The Watermeter and the KWh1 meter are connected to the guest network. So that makes sense that they on a different network. I gonna change it and let you know.

htilburgs

@vansman
Oké, sounds good. Succes!

vansman

@htilburgs P1 and Water works now. Thanks for your help and making this module.
I’ve also looked for the KWH enerymeter data myself but i get no data when i try to see it in the browser. Manual for the api on Homewizard site talks about V1 and V2. That for later :-)

I also add (Ai) current_voltage data on my screen, maybe nice to add native in your code.

htilburgs

@vansman said in MMM-MyHomeWizard:

current_voltage data

What do you mean with current_voltage data?
When I look into HomeWizard, I don’t see this.

If you mean active_voltage, than I don’t see any use to know that my voltage is 230V, because if I’m right than this never changes (I hope ;-))

vansman

@htilburgs Sorry i mean active voltage yes.
I look at it to see on a sunny day what’s the voltage.
Above 253V the solar panel inverter shuts down. This can happen when you have a lot of solar power in your neighbourhood. My peak was 247V.