MMM-Pir alternative for bookworm

sdetweil

@Muffex a couple other pir modules were added to the 3rd party list

also see
https://forum.magicmirror.builders/topic/19362/googleassistant-and-related-modules

Muffex

Hello again.

I’m now using MMM-Universal-Pir from here: https://gitlab.com/khassel/MMM-Universal-Pir

This is my config to turn the screen (connected via HDMI) on/off :

module: "MMM-Universal-Pir",
                hiddenOnStartup: true,
                config: {
                        gpioCommand: "gpiomon -r -b gpiochip0 4",
                        onCommand: "vcgencmd display_power 1",
                        offCommand: "vcgencmd display_power 0",
                        deactivateDelay: 60 * 1000,
                }

regards
Muffex

Muffex

After switching to “dtoverlay=vc4-kms-v3d” in /boot/firmware/config.txt the commands did not work anymore.

This is my current config:

module: "MMM-Universal-Pir",
                hiddenOnStartup: true,
                config: {
                        gpioCommand: "gpiomon -r -b gpiochip0 4",
                        onCommand: "echo on | sudo tee /sys/class/drm/card1-HDMI-A-1/status",
                        offCommand: "echo off | sudo tee /sys/class/drm/card1-HDMI-A-1/status",                        
                        deactivateDelay: 60 * 1000,
                }

sdetweil

@Muffex yes the commands change. don’t know what to.

sdetweil

@Muffex do those work,

Muffex

@sdetweil said in MMM-Pir alternative for bookworm:

@Muffex do those work,

Hey @sdetweil,

yes, now everything works as inteded. :)

I was just thinking of others who may read this thread at a later date. Since bookworm is in the title I didn’t want to mislead them with the old vcgencmd which does not work with wayland. (At least in my case it didn’t.)

regards

sdetweil

@Muffex awesome! your prior post wasn’t clear to me