Installing on a Pi Zero

Big11

@andyc7687

as for your Question

i’m installing over SSH but start it then directly on the Pi0…

i will i try a new Installation by now…

normally i don’t run “npm install” as root…
don’t know if i wrote so…

Big11

@big11

thats my “achievment” from last night…

pi@raspberrypi:~ $ cd MagicMirror/
pi@raspberrypi:~/MagicMirror $ npm start

> magicmirror@2.6.0 start /home/pi/MagicMirror
> sh run-start.sh

run-start.sh: 4: run-start.sh: electron: not found
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.6.0 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR!
npm ERR! Failed at the magicmirror@2.6.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-01-10T07_11_11_053Z-debug.log
pi@raspberrypi:~/MagicMirror $

12wsx

finally full success!!:)
@big11 install directly from raspberry terminal not via ssh.
After few fresh installation and hundreds errors last time tried install using

bash -c "$(curl -sL https://raw.githubusercontent.com/ac2799/MagicMirror/master/installers/raspberry.sh)"

from raspberrypi terminal.There were some errors but finally worked.
if you want, I can make a image of my card and share it.

Big11

@12wsx

you made my day…

it works…

the first differences i encountered was the Installation of electron …
this i didn’t found at all the others…

and i thought before, that this will be the quest…

regarding to the warnings installing npm

you could fix that with “npm Audit fix” or “npm Audit fix --force”
as suggested…

i did this also, so maybe this could be an error too…

and if it works but this warnings, who cares…. :-)

have a great day…
thank you

Wordonroad

Awesome write up. Super helpful!

qu1que

Thank you very much for this work! The tutorial works perfectly. I just installed it in a rpi zero W. Highly recommended for anyone who wants to install it on this SBC.

cdh1001

Many thanks Andrew - worked well for me (other than first step: connecting to wifi with WPA2 needed some minor tweaks.)

andyc7687

@cdh1001 please specify tweaks as they might help others.

cdh1001

@andyc7687 - I needed to delete the line: key_mgmt=WPA-PSK Based on discussions elsewhere I originally tried renaming Key_mgmt to WPA2 and/or changing group=CCMP, but neither of those were necessary for me; simply deleting the line was sufficient.

andyc7687

@cdh1001 thanks, I will amend my guide over the weekend then.