Can't seem to get PlayStation 3 Eye Camera to work

Chris

Hello,

Modify your ~ / .asoundrc and /etc/asound.conf files

sudo nano /etc/asound.conf

sudo nano .asoundrc

with this code:

# ps3 eye + 3.5mm speaker Raspberry Pi
## Suggested by http://julius.sourceforge.jp/forum/viewtopic.php?f=9&t=66
## Modified by https://github.com/afzalive
pcm.jack {
  type hw
  card ALSA
}
pcm.array {
  type hw
  card CameraB409241
}
pcm.softvol {
  type softvol
  slave.pcm "jack"
  control {
    name Master
    card 0
  }
}
pcm.cap {
  type plug
  slave.pcm "array"
  slave.channels 4
  ttable {
    0.0 30.0
    1.1 30.0
  }
}
pcm.!default {
    type asym
    playback.pcm "plug:softvol"
    capture.pcm {
      type plug
      slave.pcm "cap"
    }
}
ctl.!default {
  type hw
  card 0
}
ctl.softvol {
  type hw
  card 0
}

open a terminal and install pulseaudio:

sudo apt-get install pulseaudio

sudo apt-get install pavucontrol gstreamer0.10-pulseaudio

reboot and in the menu of raspbian you should see a tab allowing you to access the pulseaudio settings (sound and video tabs).

The PS3 mic will appear in it.

I hope I have been clear in my indications,

Regards,

jmartin1009

@chris oh wow, thank you! I’m not able to try this right now but I will give it a shot tonight, thank you so much!!

jmartin1009

@chris I’m trying to do it right now but I can’t seem to find a file in etc/ named asound.conf, I can find asound.conf.swp and asound.conf.save, but it says I don’t have permission to rename, edit, or add a new file called asound.conf in the folder so idk what to do about that

jmartin1009

@chris also when i tried to do the second line of the pulseaudio install, i got

pi@raspberrypi:~ $ sudo apt-get install pauvcontrol gstreamer0.10-pulseaudio
Reading package lists... Done
Building dependency tree        
Reading state information... Done
E: Unable to locate package pauvcontrol

what do i do to fix this, thanks!

yawns

It is pavucontrol, not pauvcontrol :-)

jmartin1009

@yawns what about the asound.conf file though? I can’t find it or create a new one to put that code in :/ but thanks for the help with the pavucontrol haha I didnt notice I read it wrong

sdetweil

@jmartin1009 said in Can't seem to get PlayStation 3 Eye Camera to work:

asound.conf

that file is called .asoundrc
it is typically in the users home folder (/home/pi)… note that that the name starts with a dot (.)

Chris

@jmartin1009 said in Can't seem to get PlayStation 3 Eye Camera to work:

@chris also when i tried to do the second line of the pulseaudio install, i got
pi@raspberrypi:~ $ sudo apt-get install pauvcontrol gstreamer0.10-pulseaudio
Reading package lists... Done
Building dependency tree        
Reading state information... Done
E: Unable to locate package pauvcontrol
what do i do to fix this, thanks!

Hello,

it is actually pavucontrol and not pauvcontrol as yawms rightly pointed out.

the .asound.conf file is a hidden file. right-click in the file explorer window and choose to show hidden files. Normally it will appear.

In any case, if there is no sudo nano command .asound.conf in the terminal will create this file.

as sdetweil tells you, stick to the point at the beginning of the file.

Regards,

jmartin1009

@chris @sdetweil @yawns I was able to edit the asoundrc file, but the .conf file wasn’t showing up as I was looking with the hidden files on, the only asound.conf files I could find were asound.conf.swp and asound.conf.save. I’m also kind of confused about how to save a new file in the terminal if I do the sudo nano method, because I was able to get into etc/ from there but it was only trying to have to overwrite a file, not create a new one, if there is a way to create a new file altogether for asound.conf, then I would like to know how to do that because it’s not appearing in hidden files and when I make the file in the terminal it seems like I can only overwrite. Thank you!

sdetweil

@jmartin1009 to make a new file, just rename the existing one to something else (asound.conf.save) and then create a new file