Hi @Jopyth, Hi all,
good news: It works after installing python-lxml as follows:
sudo apt-get install python-lxml
Thank you very much for your support and have a nice weekend!
Hi @Jopyth, Hi all,
good news: It works after installing python-lxml as follows:
sudo apt-get install python-lxml
Thank you very much for your support and have a nice weekend!
Hi @Jopyth, Hi all,
good news: It works after installing python-lxml as follows:
sudo apt-get install python-lxml
Thank you very much for your support and have a nice weekend!
@Jopyth i’m trying to test the recommended links this weekend and give you a feedback afterwards.
Thank you so far!
@Jopyth i tried calling it directly and get the same result:
@Jopyth Thank you for your respond!
Yes, i executed step 3 of the installation. As far as a remember […] nothing did go wrong.
Hoping that i did not damage anything i executed your listed command one by one once again:
sudo apt-get install python-dev
–> already latest version
sudo apt-get install libxml2-dev
–> already latest version
sudo apt-get install libxslt1-dev
–> already latest version
sudo apt-get install zlib1g-dev
–> already latest version
sudo pip install fritzconnection
–> Requirement already satisfied (use --upgrade to upgrade): fritzconnection in /usr/local/lib/python2.7/dist-packages
Cleaning up…
So for the last command i additionally executed
sudo pip install fritzconnection --upgrade
–> Requirement already up-to-date: fritzconnection in /usr/local/lib/python2.7/dist-packages
Cleaning up…
@ostfilinchen yes i’m able to login using this user / password.
Hi alltogether,
as suggested by ostfilinchen i updated nodejs with the same commands as kwaekler: Also without success :-(
In addition and also suggested by ostfilinchen i removed the module folder and reinstalled the module again: Also without success :-(
@Jopyth (btw: Thank you for supporting us!):
mm-error-0.log tells me the following
MMM-FRITZ-Box-Callmonitor error while accessing FRITZ!Box:
Traceback (most recent call last):
File "/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/fritz_access.py", line 1, in
import argparse, os, fritzconnection, urllib2, sys, json
File "/usr/local/lib/python2.7/dist-packages/fritzconnection/__init__.py", line 3, in
from .fritzconnection import (
File "/usr/local/lib/python2.7/dist-packages/fritzconnection/fritzconnection.py", line 39, in
from lxml import etree
ImportError: No module named lxml
As promissed before just some additional environmental informations from my side:
{
module: 'MMM-FRITZ-Box-Callmonitor',
position: 'top_right', // This can be any of the regions. Best results in left or right regions.
header: "Kürzliche Anrufe", // This is optional
config: {
fritzIP: '10.0.1.1',
username: 'magicmirror',
password: '**********',
reloadContactsInterval: 5,
debug: true,
showContactsStatus: true
}
},
Hello everybody,
first of all @ostfilinchen: Thank you for your great support!
I just want to tell you, that kwaeksler is not the only one facing this problem.
Exactly this problem also appears on my MagicMirror installation.
Currently i have no possibility to check anything regarding my MagicMirror installation, but as soon as i have time (this weekend) i’m going to catch some more information that may be helpful for you (firmware version FritzBox, config MagicMirror, …).
I already tried
sudo apt-get update
sudo reboot
without succes.
Additionally i’m going to try
sudo apt-get update
sudo apt-get dist-upgrade
sudo reboot
Best regards
Aaron