@sdetweil I did as you suggested and installed the waveshare drivers after loading the desktop the first time, plus a little raspi-config action.

Thanks again for your help, much appreciated.

@sdetweil right, feeling pretty stupid at the moment. I’ve added the code with global setting but it doesn’t appear to have changed anything. No errors are coming up. Do I need to add or change any code of the existing modules in my config? I was a bit confused as most modules need an npm install but this one doesn’t appear to need that according to the readme. Sorry to be a continuous pain. Your help is greatly appreciated.

@sdetweil right you are!! “Your configuration file doesn’t contain syntax errors :)” is now what I’m seeing. Thank you for all your help.

@sdetweil Thanks for the npm run config:check That has helped me to clean up my config.js to not have any errors. After fixing all the issues (mainly with the use of ( ’ ) as opposed to ( " ), which is confusing when most of the code already written uses the single quote instead of the double?) I then went to add the Carousel to the top of my code as below:

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["::fff:0.0.0.0/1", "::fff:128.0.0.0/2", "::fff:192.0.0.0/3", "::fff:224.0.0.0/4", "127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "imperial",

	modules: [
		{
			module: "MMM-Carousel",
			config: {
				transitionInterval: 10000,
				mode: "global"
            }
        }
		{
			module: "alert",
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "What are we doing?",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://it's-still-my-secret.ical"
					}
				]
			}
		},
		 {
			       module: "MMM-TFL",
			       position: "bottom_right", // This can be any of the regions but works best on either side of the display
			       config: {
				               updateTime: 600000,
				               modes: ["tube", "overground", "national-rail"],
				               lines: ["c2c", "bakerloo", "central", "district", "hammersmith-city", "jubilee", "metropolitan", "northern", "piccadilly", "victoria", "waterloo-city"],
				             }
			     },
		{
			units: "imperial",
			module: "currentweather",
			position: "top_right",
			config: {
				location: "*****",
				locationID: "********", //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "********************************",
				roundTemp: "true",
				degreeLabel: "true",
				showPeriod: "fasle",
				onlyTemp: false,
				iconTable: {
					    					"01d": "wi-day-sunny",
					    					"02d": "wi-day-cloudy",
					    					"03d": "wi-cloudy",
					    					"04d": "wi-cloudy-windy",
					    					"09d": "wi-showers",
					    					"10d": "wi-rain",
					    					"11d": "wi-thunderstorm",
					    					"13d": "wi-snow",
					    					"50d": "wi-fog",
					    					"01n": "wi-night",
					    					"02n": "wi-night-cloudy",
					    					"03n": "wi-night-cloudy",
					    					"04n": "wi-night-cloudy",
					    					"09n": "wi-night-showers",
					    					"10n": "wi-night-rain",
					    					"11n": "wi-night-thunderstorm",
					    					"13n": "wi-night-snow",
					    					"50n": "wi-night-alt-cloudy-windy"
				}
			}
		},
		{
			units: "imperial",
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "London",
				locationID: "*******", //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "********************************"
			}
		},
		{
			module: "MMM-UKNationalRail",
			position: "bottom_left",
			header: "Departures", //Optional - delete this line to turn OFF the header completely
			config: {
				stationCode: "***", // CRS code for station
				app_id: "********", // TransportAPI App ID
				app_key: "*********************************", // TransportAPI App Key
				maxResults: 5, //Optional - Maximum results to display.
				showOrigin: false //Optional - Show the origin of the train in the table
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

With the code implemented at the top, I ran npm run config:check and it now comes back that it doesn’t like the { before "module: "alert", referring to it as an Unexpected token. When I’ve taken that out, it says the Unexpected token is now module. I’m thinking I’m missing something that should be there as opposed to something that shouldn’t but I’m not sure what the token it’s expecting is?

@sdetweil thanks, that worked. Looks like I’ve got some clean up to do in my initial code before moving on. I’ll clean this up tonight and implement the new module tomorrow. Thanks again for your help.

@sdetweil Thanks for your help. Unfortunately that doesn’t seem to be working for me. I can’t post what it’s telling me as the reply keeps getting flagged for spam? Essentially it’s telling me the proper usage of npm and asking if I meant npm config. Maybe I’m doing something wrong? I’m doing cd MagicMirror then npm config:check. Sorry, it would be much easier if I could copy / paste but for whatever reason, it won’t let me.

Hello. I’ve been trying to program one of my MM projects with a small screen. After a long process, and lots of help on this forum, I’ve finally got my project working with the LCD I’m using. I’ve been researching about the MMM-Carousel module and I am a bit confused with the configuration. I’ve had a look around and don’t seem to have an answer for my question. I apologise in advance if I’m being really thick or missed the answer.

Having a look at the config for the Global setting, it’s my understanding that my config.js file should look something like this:

var config = {
    modules: [
        {
            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: ['clock'],
                mode: 'global'
            }
        }
    ]
}

I guess I’m having trouble getting the code to work with the configuration of the other modules I’m using, still being in my config.js. When I try to add the above to my existing config.js I get an error and it tells my my config is wrong. I have tried adding just this to my config just under var config = { and still got an error:

 {
            module: 'MMM-Carousel',
            config: {
                transitionInterval: 10000,
                ignoreModules: ['clock'],
                mode: 'global'
            }
        }

Can someone please help me with this? Below is my working config.js with the API Keys redacted. How do I integrate these with the MMM-Carousel config? I essentially want each module to show full screen for a certain duration before flipping to the next, making them much more readable on my 4 inch display. Any help is greatly appreciated.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["::fff:0.0.0.0/1", "::fff:128.0.0.0/2", "::fff:192.0.0.0/3", "::fff:224.0.0.0/4", "127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	language: "en",
	timeFormat: 24,
	units: "imperial",

	modules: [
		{
			module: "alert",
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "What are we doing?",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://my.secret.link.to.shared.calendar"
					}
				]
			}
		},
		 {
			       module: 'MMM-TFL',
			       position: 'bottom_right',    // This can be any of the regions but works best on either side of the display
			       config: {
				               updateTime: 600000,
				               modes: ['tube', 'overground', 'national-rail'],
				               lines: ['c2c', 'bakerloo', 'central', 'district', 'hammersmith-city', 'jubilee', 'metropolitan', 'northern', 'piccadilly', 'victoria', 'waterloo-city'],
				             }
			     },
		{	
			units: "imperial",
			module: "currentweather",
			position: "top_right",
			config: {
				location: "*****",
				locationID: "*******",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "********************************",
				roundTemp: 'true',
				degreeLabel: 'true',
				showPeriod: 'fasle', 
				onlyTemp: false,
				iconTable: {
					    					'01d': 'wi-day-sunny',
					    					'02d': 'wi-day-cloudy',
					    					'03d': 'wi-cloudy',
					    					'04d': 'wi-cloudy-windy',
					    					'09d': 'wi-showers',
					    					'10d': 'wi-rain',
					    					'11d': 'wi-thunderstorm',
					    					'13d': 'wi-snow',
					    					'50d': 'wi-fog',
					    					'01n': 'wi-night',
					    					'02n': 'wi-night-cloudy',
					    					'03n': 'wi-night-cloudy',
					    					'04n': 'wi-night-cloudy',
					    					'09n': 'wi-night-showers',
					    					'10n': 'wi-night-rain',
					    					'11n': 'wi-night-thunderstorm',
					    					'13n': 'wi-night-snow',
					    					'50n': 'wi-night-alt-cloudy-windy'
									}
								
		}
		},
		{
			units: "imperial",
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "******",
				locationID: "*******",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "********************************"
			}
		},
		{
					module: 		'MMM-UKNationalRail',
					position: 		'bottom_left',
					header:			'Departures',		//Optional - delete this line to turn OFF the header completely
					config: {
									stationCode: 		'***', 		// CRS code for station
									app_id: 			'*********', 		// TransportAPI App ID
									app_key: 			'********************', 		// TransportAPI App Key
									maxResults: 		5,  		//Optional - Maximum results to display.
									showOrigin: 		false   	//Optional - Show the origin of the train in the table
								}
				},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

@sdetweil I did as you suggested and installed the waveshare drivers after loading the desktop the first time, plus a little raspi-config action.

Thanks again for your help, much appreciated.

@sdetweil SOLVED!!!

Thank you everyone for your support. It seems that in the end, it was down to using Raspbian Lite. After downloading the full build and following the instructions on your github, were all sorted. Well… almost, I’ve got some sizing to play around with and still need to load my custom .css and .js but that shouldn’t be an issue at all. Thanks again for all your help, especially @sdetweil

@sdetweil Right, so before I get ahead of myself and balls it up again. I have just installed Raspbian Buster Full 2020-02-13 image and going through the initial setup on my Pi Zero W. Should I do the Waveshare drivers for the 4 inch LCD first and then do the MM scripts on your github? Or should I run your scripts first, configure my MM, then do the Waveshare driver?

@sdetweil in the immortal words of Homer J. Simpson - Doh! I’ll have to give this a try later this evening. Is there any reason the GUI version will work and the lite won’t with the small LCD?