Hi!
iv’e recently freshly installed my RPI3
now, i installed MM, configured it as it should be without errors or bugs (hopfully) using the help of http://jshint.com/ wich doesnt shows any problems, but when the MM loads up, no modules are loaded except from the calendar and the clock.
i have only installed MMM-Tools
https://github.com/eouia/MMM-Tools
as a3rd party module. but none of the oters work with or without it…
what have i done wrong?
heres the thing:
ive uninstalled MM and installed it again, and without my changes to the config file it works perfectly. after a change it (with the one below), all modules stop working except for the calendar and clock.
any ideas? :(
/* Magic Mirror Config Sample
*
* By Michael Teeuw http://michaelteeuw.nl
* MIT Licensed.
*
* For more information how you can configurate this file
* See https://github.com/MichMich/MagicMirror#configuration
*
*/
var config = {
address: "localhost", // Address to listen on, can be:
// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
// - another specific IPv4/6 to listen on a specific interface
// - "", "0.0.0.0", "::" to listen on any interface
// Default, when address config is left out, is "localhost"
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
// or add a specific IPv4 of 192.168.1.5 :
// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],
language: "en",
timeFormat: 24,
units: "metric",
modules: [
// new module
{
module: "alert",
},
// new module
{
module: "updatenotification",
position: "top_bar"
},
// new module
{
module: "clock",
position: "top_left"
},
// new module
{
module: "calendar",
header: "X",
position: "top_left",
config: {
calendars: [
{
symbol: "calendar-check-o ",
url: "X"
}
]
}
},
// new module
{
module: "calendar",
header: "X",
position: "top_left",
config: {
calendars: [
{
symbol: "calendar-check-o ",
url: "X"
}
]
}
},
// new module
{
module: "compliments",
position: "" //lower_third
},
{
module: "currentweather",
position: "top_right",
config: {
location: "X",
locationID: "X", //ID from http://www.openweathermap.org/help/city_list.txt
appid: "X"
}
},
// new module
{
module: "weatherforecast",
position: "top_right",
header: "Weather Forecast",
config: {
location: "X",
locationID: "X", //ID from http://www.openweathermap.org/help/city_list.txt
appid: "X"
}
},
// new module
{
module: "newsfeed",
position: "bottom_bar",
config: {
feeds: [
{
title: "X",
url: "X"
}
],
showSourceTitle: true,
showPublishDate: true
}
},
// new module
{
module: 'MMM-Tools',
position: 'bottom_right',
config: {
device : "RPI", // "ATB" is also available
refresh_interval_ms : 1000,
warning_interval_ms : 1000 * 60 * 5,
enable_warning : true,
warning : {
CPU_TEMPERATURE : 65,
GPU_TEMPERATURE : 65,
CPU_USAGE : 85,
STORAGE_USED_PERCENT : 80,
MEMORY_USED_PERCENT : 80
}
}
},
// new module
]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}