MagicMirror install on proxmox LXC Container?

sdetweil · Oct 15, 2022, 9:20 PM

@kusselin but if you are running in a container

the the mm.sh script should be running as server
as there is no ui on a container

npm run server

not

npm start

kusselin · Oct 16, 2022, 9:39 AM

@sdetweil said in MagicMirror install on proxmox LXC Container?:

@kusselin pm2 logs --lines=50
not good to install under root

Hello, thank you for the tips…o.k. under root this is nuicht so good…
Again from the beginning…I install ubuntu 22.04 standard in a LXC container. I have also created the container by default. This has also all worked great. After that I started the container.

So when I am on the console it is so that I log in with root and pass. But that is not so good.
So I have now created a standard user with pass. Habs then times made as on Rasoian with user “pi” udn the default password for it. To test!

So, now I log in with user “pi” and the default password…now I stand on the “prompt”

login as: pi
pi@192.168.200.74's password:
Welcome to Ubuntu 22.04.1 LTS (GNU/Linux 5.15.35-1-pve x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage
Last login: Sat Oct 15 19:06:04 2022 from 192.168.1.236
pi@MagicMirror-live:~$ ^C
pi@MagicMirror-live:~$

Then I take the script from you here:

bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

So and if I then start your script via Console then comes the message “[sudo] password or pi”.

pi@MagicMirror-live:~$ bash -c  "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)"

$$\      $$\                     $$\           $$\      $$\ $$\                                          $$$$$$\
$$$\    $$$ |                    \__|          $$$\    $$$ |\__|                                        $$  __$$\
$$$$\  $$$$ | $$$$$$\   $$$$$$\  $$\  $$$$$$$\ $$$$\  $$$$ |$$\  $$$$$$\   $$$$$$\   $$$$$$\   $$$$$$\  \__/  $$ |
$$\$$\$$ $$ | \____$$\ $$  __$$\ $$ |$$  _____|$$\$$\$$ $$ |$$ |$$  __$$\ $$  __$$\ $$  __$$\ $$  __$$\  $$$$$$  |
$$ \$$$  $$ | $$$$$$$ |$$ /  $$ |$$ |$$ /      $$ \$$$  $$ |$$ |$$ |  \__|$$ |  \__|$$ /  $$ |$$ |  \__|$$  ____/
$$ |\$  /$$ |$$  __$$ |$$ |  $$ |$$ |$$ |      $$ |\$  /$$ |$$ |$$ |      $$ |      $$ |  $$ |$$ |      $$ |
$$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ |      $$ |      \$$$$$$  |$$ |      $$$$$$$$\
\__|     \__| \_______| \____$$ |\__| \_______|\__|     \__|\__|\__|      \__|       \______/ \__|      \________|
                       $$\   $$ |
                       \$$$$$$  |
                        \______/

install log being saved to /home/pi/install.log
Installing helper tools ...
[sudo] password for pi:

But you just said that the installation under “root” (sudo) is not good? Yes what is right now? What do I have to do now?

Do I have to insert “su” here then??

I don’t have a “sudo” password for pi - how do I create it?

Do I have to log in again with “pi” and the default pass and then create a “root” pass for pi?

and if I then take the root password from my created LXC container, it always comes “sorry try again”.

[sudo] password for pi:
Sorry, try again.
[sudo] password for pi:

What am I doing wrong here?

This is what I do not understand and do not know. Can you please describe me this in understandable sentences briefly how I have to proceed with the installation?

Thank you

kusselin · Oct 16, 2022, 10:09 AM

so installed again under “pi”…

Commands executed by you here the result:

login as: pi
pi@192.168.200.74's password:
Welcome to Ubuntu 22.04.1 LTS (GNU/Linux 5.15.35-1-pve x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage
Last login: Sun Oct 16 09:53:33 2022 from 192.168.1.236
pi@MagicMirror-live:~$ cd MagicMirror
pi@MagicMirror-live:~/MagicMirror$ pm2 start MagicMirror
[PM2] Applying action restartProcessId on app [MagicMirror](ids: [ 0 ])
[PM2] [MagicMirror](0) ✓
[PM2] Process successfully started
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 143  │ online    │ 0%       │ 4.0kb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@MagicMirror-live:~/MagicMirror$ pm2 status
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 308  │ online    │ 0%       │ 3.0mb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@MagicMirror-live:~/MagicMirror$ pm2 start MagicMirror
[PM2] Applying action restartProcessId on app [MagicMirror](ids: [ 0 ])
[PM2] [MagicMirror](0) ✓
[PM2] Process successfully started
┌────┬────────────────────┬──────────┬──────┬───────────┬──────────┬──────────┐
│ id │ name               │ mode     │ ↺    │ status    │ cpu      │ memory   │
├────┼────────────────────┼──────────┼──────┼───────────┼──────────┼──────────┤
│ 0  │ MagicMirror        │ fork     │ 363  │ online    │ 0%       │ 4.0kb    │
└────┴────────────────────┴──────────┴──────┴───────────┴──────────┴──────────┘
pi@MagicMirror-live:~/MagicMirror$

If I now enter the following in the browser (Mozilla) then comes network overrun :-(

http://192.168.200.74:8080

I don´t know whta i can do :-(

her my config

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "0.0.0.0", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: [], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	locale: "de-DE",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

installed now is MagicMirror here

/home/pi/MagicMirror

kusselin · Oct 16, 2022, 10:33 AM

When everyone have proxmox…please install it and give me feedback how you installed it.
Thanks a lot

sdetweil · Oct 16, 2022, 11:57 AM

@kusselin

change the script that starts mm from

npm start
to
npm run server

a container has no desktop,
npm start tries to load the graphical UI using electron.

npm run server

just starts the server side, for external browsers to access

I can’t tell what that error is, but the internet has moved to https connections by default, and many browsers warn when accessing http sites like MagicMirror is running.

so you either have to accept the warning, or find a way in the browser to disable to message

https setup requires a certificate, which is not free.

kusselin · Oct 16, 2022, 12:38 PM

hi sdetweil, sorry my Linux knowledge is not good.

Can you explain me how to change the script udn where in the script?

Is my basic installation but with user “pi” so correct

sdetweil · Oct 16, 2022, 1:08 PM

@kusselin my pm2 setup uses
~/MagicMirror/installers/mm.sh

kusselin · Oct 16, 2022, 1:08 PM

@sdetweil said in MagicMirror install on proxmox LXC Container?:

@kusselin my pm2 setup uses
~/MagicMirror/installers/mm.sh

this standing in my mm.sh

cd ~/MagicMirror
DISPLAY=:0 npm start

an now i must put this into than looks like this

cd ~/MagicMirror
DISPLAY=:0 npm start
npm run server

so o.k.?

sdetweil · Oct 16, 2022, 1:09 PM

@kusselin said in MagicMirror install on proxmox LXC Container?:

cd ~/MagicMirror
DISPLAY=:0 npm start
npm run server

no

cd ~/MagicMirror
npm run server

kusselin · Oct 16, 2022, 1:23 PM

o.k…next try to step and hope i can start the MM

look…

pi@MagicMirror-live:~$
curl -sL https://deb.nodesource.com/setup_18.x | sudo -E bash -
[sudo] password for pi:

## Installing the NodeSource Node.js 18.x repo...


## Populating apt-get cache...

+ apt-get update
Hit:1 https://deb.nodesource.com/node_16.x jammy InRelease
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [114 kB]
Get:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Fetched 224 kB in 2s (105 kB/s)
Reading package lists... Done

## Confirming "jammy" is supported...

+ curl -sLf -o /dev/null 'https://deb.nodesource.com/node_18.x/dists/jammy/Release'

## Adding the NodeSource signing key to your keyring...

+ curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null

## Creating apt sources list file for the NodeSource Node.js 18.x repo...

+ echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x jammy main' > /etc/apt/sources.list.d/nodesource.list
+ echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x jammy main' >> /etc/apt/sources.list.d/nodesource.list

## Running `apt-get update` for you...

+ apt-get update
Get:1 https://deb.nodesource.com/node_18.x jammy InRelease [4563 B]
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Get:5 https://deb.nodesource.com/node_18.x jammy/main amd64 Packages [775 B]
Fetched 5338 B in 2s (2387 B/s)
Reading package lists... Done

## Run `sudo apt-get install -y nodejs` to install Node.js 18.x and npm
## You may also need development tools to build native addons:
     sudo apt-get install gcc g++ make
## To install the Yarn package manager, run:
     curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/yarnkey.gpg >/dev/null
     echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
     sudo apt-get update && sudo apt-get install yarn


pi@MagicMirror-live:~$ sudo apt-get update && sudo apt-get install yarn
Hit:1 https://deb.nodesource.com/node_18.x jammy InRelease
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'cmdtest' instead of 'yarn'
The following additional packages will be installed:
  python3-cliapp python3-importlib-metadata python3-markdown
  python3-more-itertools python3-pygments python3-ttystatus python3-zipp
Suggested packages:
  python3-xdg python-markdown-doc python-pygments-doc ttf-bitstream-vera
The following NEW packages will be installed:
  cmdtest python3-cliapp python3-importlib-metadata python3-markdown
  python3-more-itertools python3-pygments python3-ttystatus python3-zipp
0 upgraded, 8 newly installed, 0 to remove and 1 not upgraded.
Need to get 969 kB of archives.
After this operation, 5201 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://archive.ubuntu.com/ubuntu jammy/universe amd64 python3-cliapp all 1.20180812.1-4 [44.5 kB]
Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 python3-more-itertools all 8.10.0-2 [47.9 kB]
Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 python3-zipp all 1.0.0-3 [5440 B]
Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 python3-importlib-metadata all 4.6.4-1 [16.2 kB]
Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 python3-markdown all 3.3.6-1 [68.5 kB]
Get:6 http://archive.ubuntu.com/ubuntu jammy/universe amd64 python3-ttystatus all 0.38-4 [14.7 kB]
Get:7 http://archive.ubuntu.com/ubuntu jammy/universe amd64 cmdtest all 0.32.14.gcdfe14e-2 [21.9 kB]
Get:8 http://archive.ubuntu.com/ubuntu jammy/main amd64 python3-pygments all 2.11.2+dfsg-2 [750 kB]
Fetched 969 kB in 1s (911 kB/s)
Selecting previously unselected package python3-cliapp.
(Reading database ... 29455 files and directories currently installed.)
Preparing to unpack .../0-python3-cliapp_1.20180812.1-4_all.deb ...
Unpacking python3-cliapp (1.20180812.1-4) ...
Selecting previously unselected package python3-more-itertools.
Preparing to unpack .../1-python3-more-itertools_8.10.0-2_all.deb ...
Unpacking python3-more-itertools (8.10.0-2) ...
Selecting previously unselected package python3-zipp.
Preparing to unpack .../2-python3-zipp_1.0.0-3_all.deb ...
Unpacking python3-zipp (1.0.0-3) ...
Selecting previously unselected package python3-importlib-metadata.
Preparing to unpack .../3-python3-importlib-metadata_4.6.4-1_all.deb ...
Unpacking python3-importlib-metadata (4.6.4-1) ...
Selecting previously unselected package python3-markdown.
Preparing to unpack .../4-python3-markdown_3.3.6-1_all.deb ...
Unpacking python3-markdown (3.3.6-1) ...
Selecting previously unselected package python3-ttystatus.
Preparing to unpack .../5-python3-ttystatus_0.38-4_all.deb ...
Unpacking python3-ttystatus (0.38-4) ...
Selecting previously unselected package cmdtest.
Preparing to unpack .../6-cmdtest_0.32.14.gcdfe14e-2_all.deb ...
Unpacking cmdtest (0.32.14.gcdfe14e-2) ...
Selecting previously unselected package python3-pygments.
Preparing to unpack .../7-python3-pygments_2.11.2+dfsg-2_all.deb ...
Unpacking python3-pygments (2.11.2+dfsg-2) ...
Setting up python3-ttystatus (0.38-4) ...
Setting up python3-more-itertools (8.10.0-2) ...
Setting up python3-zipp (1.0.0-3) ...
Setting up python3-cliapp (1.20180812.1-4) ...
Setting up python3-pygments (2.11.2+dfsg-2) ...
Setting up python3-importlib-metadata (4.6.4-1) ...
Setting up python3-markdown (3.3.6-1) ...
Setting up cmdtest (0.32.14.gcdfe14e-2) ...
Processing triggers for man-db (2.10.2-1) ...
pi@MagicMirror-live:~$ sudo apt install -y nodejs
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages will be upgraded:
  nodejs
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 28.5 MB of archives.
After this operation, 52.4 MB of additional disk space will be used.
Get:1 https://deb.nodesource.com/node_18.x jammy/main amd64 nodejs amd64 18.11.0-deb-1nodesource1 [28.5 MB]
Fetched 28.5 MB in 1s (22.4 MB/s)
(Reading database ... 29937 files and directories currently installed.)
Preparing to unpack .../nodejs_18.11.0-deb-1nodesource1_amd64.deb ...
Unpacking nodejs (18.11.0-deb-1nodesource1) over (16.17.1-deb-1nodesource1) ...
Setting up nodejs (18.11.0-deb-1nodesource1) ...
Processing triggers for man-db (2.10.2-1) ...
pi@MagicMirror-live:~$ git clone https://github.com/MichMich/MagicMirror
Cloning into 'MagicMirror'...
remote: Enumerating objects: 23768, done.
remote: Counting objects: 100% (1/1), done.
remote: Total 23768 (delta 0), reused 1 (delta 0), pack-reused 23767
Receiving objects: 100% (23768/23768), 19.76 MiB | 12.35 MiB/s, done.
Resolving deltas: 100% (14649/14649), done.
pi@MagicMirror-live:~$ cd MagicMirror/
pi@MagicMirror-live:~/MagicMirror$ npm run install-mm

> magicmirror@2.21.0 install-mm
> npm install --no-audit --no-fund --no-update-notifier --only=prod --omit=dev

npm WARN config only Use `--omit=dev` to omit dev dependencies from the install.

> magicmirror@2.21.0 postinstall
> npm run install-vendor && npm run install-fonts && echo "MagicMirror² installation finished successfully!
> "


> magicmirror@2.21.0 install-vendor
> echo "Installing vendor files ...
> " && cd vendor && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing vendor files ...


added 9 packages in 5s

> magicmirror@2.21.0 install-fonts
> echo "Installing fonts ...
> " && cd fonts && npm install --loglevel=error --no-audit --no-fund --no-update-notifier

Installing fonts ...


added 2 packages in 1s
MagicMirror² installation finished successfully!


> magicmirror@2.21.0 prepare
> [ -f node_modules/.bin/husky ] && husky install || echo no husky installed.

no husky installed.

added 300 packages in 36s
pi@MagicMirror-live:~/MagicMirror$ cp config/config.js.sample config/config.js
pi@MagicMirror-live:~/MagicMirror$ npm run server

> magicmirror@2.21.0 server
> node ./serveronly

[16.10.2022 13:16.02.218] [LOG]   Starting MagicMirror: v2.21.0
[16.10.2022 13:16.02.225] [LOG]   Loading config ...
[16.10.2022 13:16.02.235] [LOG]   Loading module helpers ...
[16.10.2022 13:16.02.236] [LOG]   No helper found for module: alert.
[16.10.2022 13:16.02.252] [LOG]   Initializing new module helper ...
[16.10.2022 13:16.02.254] [LOG]   Module helper loaded: updatenotification
[16.10.2022 13:16.02.254] [LOG]   No helper found for module: clock.
[16.10.2022 13:16.02.513] [LOG]   Initializing new module helper ...
[16.10.2022 13:16.02.514] [LOG]   Module helper loaded: calendar
[16.10.2022 13:16.02.515] [LOG]   No helper found for module: compliments.
[16.10.2022 13:16.02.516] [LOG]   No helper found for module: weather.
[16.10.2022 13:16.02.536] [LOG]   Initializing new module helper ...
[16.10.2022 13:16.02.536] [LOG]   Module helper loaded: newsfeed
[16.10.2022 13:16.02.536] [LOG]   All module helpers loaded.
[16.10.2022 13:16.02.679] [LOG]   Starting server on port 8080 ...
[16.10.2022 13:16.02.695] [LOG]   Server started ...
[16.10.2022 13:16.02.696] [LOG]   Connecting socket for: updatenotification
[16.10.2022 13:16.02.696] [LOG]   Starting module helper: updatenotification
[16.10.2022 13:16.02.697] [LOG]   Connecting socket for: calendar
[16.10.2022 13:16.02.697] [LOG]   Starting node helper for: calendar
[16.10.2022 13:16.02.697] [LOG]   Connecting socket for: newsfeed
[16.10.2022 13:16.02.698] [LOG]   Starting node helper for: newsfeed
[16.10.2022 13:16.02.698] [LOG]   Sockets connected & modules started ...
[16.10.2022 13:16.02.698] [LOG]
Ready to go! Please point your browser to: http://localhost:8080

is this now right abd is the info “no helper module” O.K.?

best regards

P.S. when i put “http://localhost:8080” in the browser linie - it´s not going :-(