• Recent
  • Tags
  • Unsolved
  • Solved
  • MagicMirror² Repository
  • Documentation
  • 3rd-Party-Modules
  • Donate
  • Discord
  • Register
  • Login
MagicMirror Forum
  • Recent
  • Tags
  • Unsolved
  • Solved
  • MagicMirror² Repository
  • Documentation
  • 3rd-Party-Modules
  • Donate
  • Discord
  • Register
  • Login
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.

New Setup - Log Filled with "CreatePlatformSocket() failed: Address family not supported by protocol (97)"

Scheduled Pinned Locked Moved Solved Troubleshooting
11 Posts 3 Posters 3.7k Views 3 Watching
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • B Offline
    butchkemper
    last edited by Jun 7, 2023, 5:44 PM

    Thank you for your response. I am delayed in responding because La Jefecita had other priorities for me that did not include my computers. :)

    I have a typo in the original post as the computer is a Raspberry Pi Model 3 A+ Rev 1.0

    The Raspios was built with the image:
    2023-05-03-raspios-bullseye-armhf.img.xz

    The output from the commands are:

    uname -a
    pi@MagicMirror:~$ uname -a
    Linux MagicMirror 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux

    lsb_release -a
    No LSB modules are available.
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 11 (bullseye)
    Release: 11
    Codename: bullseye

    node -v
    v16.20.0

    npm -v
    8.19.4

    I used the Manual Installation method as described in MagicMirror² Documentation Installation & Usage.

    Address value in ~/MagicMirror/config/config.js is localhost

    I have also included the config file below.

    Thank you for your assistance.

    Butch

    /* MagicMirror² Config Sample
     *
     * By Michael Teeuw https://michaelteeuw.nl
     * MIT Licensed.
     *
     * For more information on how you can configure this file
     * see https://docs.magicmirror.builders/configuration/introduction.html
     * and https://docs.magicmirror.builders/modules/configuration.html
     */
    let config = {
            address: "localhost",   // Address to listen on, can be:
                                    // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
                                    // - another specific IPv4/6 to listen on a specific interface
                                    // - "0.0.0.0", "::" to listen on any interface
                                    // Default, when address config is left out or empty, is "localhost"
            port: 8080,
            basePath: "/",          // The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
                                            // you must set the sub path here. basePath must end with a /
            ipWhitelist: ["127.0.0.1", "192.168.1.0/24"],   // Set [] to allow all IP addresses
                                                                    // or add a specific IPv4 of 192.168.1.5 :
                                                                    // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
                                                                    // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
                                                                    // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],
    
            useHttps: false,                // Support HTTPS or not, default "false" will use HTTP
            httpsPrivateKey: "",    // HTTPS private key path, only require when useHttps is true
            httpsCertificate: "",   // HTTPS Certificate path, only require when useHttps is true
    
            language: "en",
            locale: "en-US",
            logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
            timeFormat: 24,
            units: "imperial",
    
            // serverOnly:  true/false/"local" ,
            // local for armv6l processors, default
            //   starts serveronly and then starts chrome browser
            // false, default for all NON-armv6l devices
            // true, force serveronly mode, because you want to.. no UI on this device
    
            modules: [
                    {
                            module: "alert",
                    },
                    {
                            module: "MMM-LogExt",
                            config: {}
                    },
                    {
                            module: "updatenotification",
                            position: "top_bar"
                    },
                    {
                            module: "clock",
                            position: "top_left",
                            config: {
                                    timeFormat: 24,
                            },
                    },
                    {       module: "calendar",
                           header: "Kemper Family Combined",
                            position: "top_left",
                            config: {
                                    coloredText: true,
                                    timeFormat: 24,
                                    fade: false,
                                    fadePoint: 1,
                                    maximumEntries: 20,
                                    maximumNumberOfDays: 21,
                                    fetchInterval: 300000,
                                    calendars: [
                                            {       // Butch
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "Butch",
                                                    symbol: "calendar",
                                                    color: '#FF0000'
                                            },
                                            {       // Jan
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "Jan",
                                                    symbol: "calendar",
                                                    color: '#008000'
                                            },
                                            {       // Family 1
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "Family 1",
                                                    symbol: "calendar",
                                                    color: '#FFFF00'
                                            },
                                            {       // Family 2
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "Family 2",
                                                    symbol: "calendar",
                                                    color: '#00FF00'
                                            },
                                            {       // Kids
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "Kids",
                                                    symbol: "calendar",
                                                    color: '#0000FF'
                                            },
                                            {       // City Council
                                                    url: 'http://localhost:8080/modules/calendars/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.ics',
                                                    name: "City Council",
                                                    symbol: "calendar",
                                                    color: '#FFA500'
                                            }
                                    ]
                            }
                    },
    
    //              {
    //                      module: "compliments",
    //                      position: "lower_third"
    //              },
                    {
                            module: "weather",
                            position: "top_right",
                           header: "Current Weather",
                            config: {
                                    weatherProvider: "openweathermap",
                                    type: "current",
                                    units: "imperial",
                                    tempUnits: "imperial",
                                    roundTemp: true,
                                    timeFormat: 24,
                                    appendLocationNameToHeader: true,
                                    onlyTemp: false,
                                    showSun: true,
                                    fade: false,
                                    fadePoint: 1,
                                    colored: true,
                                    updateInterval: 900000,
                                    maxEntries: 7,
                                    degreeLabel: true,
                                    lang: "en",
                                    location: "Sachse,Texas",
                                    locationID: "4724564",
                                    //ID from http://bulk.openweathermap.org/sample/city.list.json.gz;
                                    apiKey: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
                            }
                    },
                    {
                            module: "weather",
                            position: "top_right",
                            header: "Weather Forecast at",
                            config: {
                                    initialLoadDelay: 5000,
                                    weatherProvider: "openweathermap",
                                    type: "forecast",
                                    units: "imperial",
                                    tempUnits: "imperial",
                                    roundTemp: true,
                                    timeFormat: 24,
                                    appendLocationNameToHeader: true,
                                    fade: false,
                                    fadePoint: 1,
                                    colored: true,
                                    updateInterval: 900000,
                                    maxEntries: 10,
                                    maxNumberOfDays: 10,
                                    ignoreToday: false,
                                    degreeLabel: true,
                                    lang: "en",
                                    location: "Sachse,Texas",
                                    locationID: "4724564", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz;
                                    apiKey: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
                            }
                    },
                    {
                            module: "MMM-Fuel",
                            position: "top_right",
                            config: {
                                    provider: "gasbuddy",
                                    zip: "75048",
                                    types: ["regular"],
                                    sortBy: "regular",
                                    max: 7,
                                    showDistance: false,
                                    fade: false,
                                    updateInterval: 30000,
                                    rotate: false,
                                    rotateInterval: 15000
                                    }
                    },
                    {
                            module: "newsfeed",
                            position: "bottom_bar",
                            config: {
                                    feeds: [
                                            {
                                                    title: "New York Times",
                                                    url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
                                            }
                                    ],
                                    showSourceTitle: true,
                                    showPublishDate: true,
                                    broadcastNewsFeeds: true,
                                    broadcastNewsUpdates: true
                            }
                    },
            ]
    };
    
    /*************** DO NOT EDIT THE LINE BELOW ***************/
    if (typeof module !== "undefined") {module.exports = config;}
    
    

    Resistance is not Futile!
    It is voltage divided by current.

    1 Reply Last reply Reply Quote 0
    • B Offline
      butchkemper @sdetweil
      last edited by Jun 7, 2023, 5:53 PM

      @sdetweil said in New Setup - Log Filled with "CreatePlatformSocket() failed: Address family not supported by protocol (97)":

      @butchkemper can u tell me what OS instance you are running?

      output of
      lsb_release -a
      and
      uname -a

      and node -v, npm -v

      will help

      and how did you install MM? manual method or my automated scripts?

      also, can u tell me the address:
      value in ~/MagicMirror/config/config.js

      The OS was built using this image: 2023-05-03-raspios-bullseye-armhf.img.xz.

      The Raspberry Pi is a Model 3 A+ not a 3B+.

      The output of the commands you requested is:

      lsb_release -a
      No LSB modules are available.
      Distributor ID: Raspbian
      Description: Raspbian GNU/Linux 11 (bullseye)
      Release: 11
      Codename: bullseye

      uname -a
      Linux MagicMirror 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux

      node -v
      v16.20.0

      npm -v
      8.19.4

      the address: value in ~/MagicMirror/config/config.js: localhost

      Installation was the Manual Method.

      Thank you for your help.

      Butch

      Resistance is not Futile!
      It is voltage divided by current.

      M S 3 Replies Last reply Jun 7, 2023, 8:26 PM Reply Quote 0
      • M Offline
        MMRIZE @butchkemper
        last edited by MMRIZE Jun 7, 2023, 8:27 PM Jun 7, 2023, 8:26 PM

        @butchkemper
        Usually that error message happens on socket stream fails but could not know where it depends with only that log.

        My suggestion;
        Run only default modules; happens again?

        • If not, add 3rd party modules one by one and test each time. You might find the suspicious module.
        • If so, reinstall fresh MM; then try above method.

        Still happens even with fresh MM, update your OS and dependencies. And test again.

        The last method would be to format your sd card then reinstall OS itself. If still error happens; I have no way…

        Wish you a luck.

        1 Reply Last reply Reply Quote 0
        • S Offline
          sdetweil @butchkemper
          last edited by Jun 7, 2023, 8:56 PM

          @butchkemper I am testing the automated install on a new flashed sd card now , with the 5/23 32 bit image

          Sam

          How to add modules

          learning how to use browser developers window for css changes

          1 Reply Last reply Reply Quote 0
          • S Offline
            sdetweil @butchkemper
            last edited by Jun 7, 2023, 9:33 PM

            @butchkemper I installed with my automated script and all is working as expected. I added my MMM-Config module which uses socketio to the backend form and it works without problem…

            as a test

            rename your MagicMirror folder to some other name
            and then run the automated install script… see
            https://github.com/sdetweil/MagicMirror_scripts

            pi@raspberrypi:~/MagicMirror/config $ uname -a
            Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr  3 17:20:52 BST 2023 armv7l GNU/Linux
            pi@raspberrypi:~/MagicMirror/config $ lsb_release -a
            No LSB modules are available.
            Distributor ID:	Raspbian
            Description:	Raspbian GNU/Linux 11 (bullseye)
            Release:	11
            Codename:	bullseye
            pi@raspberrypi:~/MagicMirror/config $ node -v
            v16.20.0
            pi@raspberrypi:~/MagicMirror/config $ npm -v
            8.19.4
            pi@raspberrypi:~/MagicMirror/config $ 
            

            Sam

            How to add modules

            learning how to use browser developers window for css changes

            1 Reply Last reply Reply Quote 0
            • B Offline
              butchkemper
              last edited by Jun 8, 2023, 8:57 PM

              @sdetweil

              Sam,

              I did a complete new MM install using your automated scripts and found the error message is still issued.

              I found the error messages correlate to modules making network requests for data updates.

              My next step is to build a SDcard and see what happens.

              Thank you for your assistance.

              Butch

              Resistance is not Futile!
              It is voltage divided by current.

              S 1 Reply Last reply Jun 9, 2023, 11:15 AM Reply Quote 0
              • S Offline
                sdetweil @butchkemper
                last edited by Jun 9, 2023, 11:15 AM

                @butchkemper let us know how it goes…

                Sam

                How to add modules

                learning how to use browser developers window for css changes

                1 Reply Last reply Reply Quote 0
                • B Offline
                  butchkemper
                  last edited by Jun 13, 2023, 9:23 PM

                  Sam,

                  I built a new SDcard for Raspios and installed MM using your scripts. Started MM and the problem did not occur.

                  Next, I rebuilt the SSD with Raspios and installed MM. Started MM and the problem did not occur at startup and I waited while tailing the logs but nothing happened.

                  Next, I move my MM configuration changes, modules, and updates to the SSD. The problem did not occur at startup or after tailing the logs for a time.

                  I am declaring a victory for me. But we all know, in the end, that the computer demons won.

                  Butch

                  Resistance is not Futile!
                  It is voltage divided by current.

                  S 1 Reply Last reply Jun 13, 2023, 9:24 PM Reply Quote 1
                  • S Offline
                    sdetweil @butchkemper
                    last edited by Jun 13, 2023, 9:24 PM

                    @butchkemper awesome… the demons are everywhere! lol

                    Sam

                    How to add modules

                    learning how to use browser developers window for css changes

                    1 Reply Last reply Reply Quote 0
                    • 1
                    • 2
                    • 1 / 2
                    1 / 2
                    • First post
                      7/11
                      Last post
                    Enjoying MagicMirror? Please consider a donation!
                    MagicMirror created by Michael Teeuw.
                    Forum managed by Sam, technical setup by Karsten.
                    This forum is using NodeBB as its core | Contributors
                    Contact | Privacy Policy