Read the statement by Michael Teeuw here.
MM black screen
-
Hey,
i get some errors in mm-error.log.- MM version 2.26.0
- Pi4
- bullseye
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT WARNING: v3dv is neither a complete nor a conformant Vulkan implementation. Testing use only. /home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGINT WARNING: v3dv is neither a complete nor a conformant Vulkan implementation. Testing use only. WARNING: v3dv is neither a complete nor a conformant Vulkan implementation. Testing use only. Warning: loader_scanned_icd_add: Driver /usr/lib/arm-linux-gnueabihf/libvulkan_radeon.so supports Vulkan 1.2, but only supports loader interface version 4. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7) Warning: loader_scanned_icd_add: Driver /usr/lib/arm-linux-gnueabihf/libvulkan_broadcom.so supports Vulkan 1.1, but only supports loader interface version 3. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7) Warning: loader_scanned_icd_add: Driver /usr/lib/arm-linux-gnueabihf/libvulkan_lvp.so supports Vulkan 1.1, but only supports loader interface version 1. Interface version 5 or newer required to support this version of Vulkan (Policy #LDP_DRIVER_7) Warning: Layer VK_LAYER_MESA_device_select uses API version 1.2 which is older than the application specified API version of 1.3. May cause issues. Warning: terminator_CreateInstance: Manifest ICD for "/usr/lib/arm-linux-gnueabihf/libvulkan_broadcom.so" contained a 1.1 or greater API version, but does not support vkEnumerateInstanceVersion, treating as a 1.0 ICD Warning: terminator_CreateInstance: Driver /usr/lib/arm-linux-gnueabihf/libvulkan_lvp.so supports interface version 1 but still exposes VkSurfaceKHR create/destroy entrypoints (Policy #LDP_DRIVER_8) WARNING: v3dv is neither a complete nor a conformant Vulkan implementation. Testing use only. Warning: Vulkan textureCompressionBC feature required or both textureCompressionETC2 and textureCompressionASTC required. - While initializing adapter (backend=BackendType::Vulkan) at InitializeImpl (../../third_party/dawn/src/dawn/native/vulkan/PhysicalDeviceVk.cpp:159) at Initialize (../../third_party/dawn/src/dawn/native/PhysicalDevice.cpp:35)Can someone figure out the problem? The mirror is showing a black screen.
-
@sdetweil Ok, i got it.
var config = { address: "::", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080,I had to change it to:
address: "0.0.0.0",Was my mistake, i uploaded wrong config…
Don’t know why the Vulkan errors are appearing…
-
@princemaxwell I don’t think that is the problem.
can u show the full console output
-
@sdetweil Ok, i got it.
var config = { address: "::", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080,I had to change it to:
address: "0.0.0.0",Was my mistake, i uploaded wrong config…
Don’t know why the Vulkan errors are appearing…
-
@princemaxwell the vulkan errors is a bug in electron. just warnings… ignore
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login